xeridea
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 04:13:38 PM |
|
Dear Claymore , nice development. My HD8670M (Notebook 2Gb) has been moved from 3,9 H/s to 8,4 H/s in the newest version and the Notebook takes the same power from the wall !! Is there any possibility to get your Miner running on a 1GB AMD Card ? My old rig ( 6 * 7790 1GB) is waiting for it desperatly ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) From the specification the HD7790 should have four times the speed of my embedded AMD Card At the moment i can only use the nheqminer 0.4b that brings me 32 H/s (for all 6 card together) With your miner it should be 210 H/s..... Would be very nice Please keep on going.............. Edit was here fo typos Version 1 works on 1GB cards. Of course it will be a lot slower though.... Not sure about other versions. You may also try Windows ports of SilentArmy, I don't know their memory usages. Still would be slower than Claymore.
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
kiffner
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 04:13:54 PM |
|
any good mod for xfx rx 480 8gb gtr?
|
|
|
|
Golku
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 04:18:38 PM |
|
thats sick ! getting 145 985/7=140.7 1015 H/s 7 MSI RX470s 1015/7=145
|
|
|
|
mishka25
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 04:20:53 PM |
|
Hello, can someone tell me the best overclocking settings for asus R9 290 strix ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) high wattage is not problem.
|
|
|
|
TomDD
Newbie
Offline
Activity: 15
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 04:22:10 PM |
|
They're ok reckon around 120-140H/s with latest Claymore release. ROI at this speed based on current NiceHash BTC rate is around 180 days or half a year after electricity costs. Obviously very dependent on the ZEC/BTC ratio holding up for that long.
|
|
|
|
Ursul0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 04:24:00 PM |
|
Hey Claymore, how are you?
Buddy have you evaluated the possibility of dual mining for zcash?
Have a great day guys.
The ZCash mining needs both core computation and the memory bandwidth. So it might not be a good idea to do dual mining. yeah... but currently the gpu mem utilization in on ~52% on rx470
|
|
|
|
Redcard
Newbie
Offline
Activity: 28
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 04:42:40 PM |
|
Hello, can anyone recommend me a bios for RX480 nitro 4GB with Hynix memory? I've already tried mods for 1750 and 2000 straps but I can get more than 137 Sol/s..
I use sapphire nitro+ RX480 4gb hynix memory.. I edit the bios (silence mode) using polaris bios editor like this: copied 1500 timings to 1750 & 2000, 1425 to 1625, 1375 to 1425 & 1500.. change the memory setting from 1750 to 1900.. then flashed it with atiwinflash.. reboot.. Now running claymore v6.0 with -i 4 setting.. getting about 153-155 h/s... the average gpu draw power showed in GPU-Z 86.3 W... now still trying to lower GPU voltage using sapphire Trixxx to lower the power usage further... still stable so far... Thank you pal! Using these straps I reached 145/147h/s at 1200/1900mhz with claymore v6. Then i undervolted the card to 0.99mv with avg power draw 77w. Less vddc is possible but it will freeze when i close the miner.
|
|
|
|
bmtrader
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 04:45:30 PM |
|
Thanks men! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) wich one is the best for rx470 win10
|
|
|
|
olcaytu2005
Legendary
Offline
Activity: 1470
Merit: 1024
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 04:50:24 PM |
|
I love Claymore's v6.0
7 MSI RX470s: 985 H/s 955 Watts at the wall 68 ave Watts (MSI Afterburner) 57C ave GPU Temp (MSI Afterburner) 47C CPU Temp 1500 Strap MSI Afterburner settings: 1950 Memory Clock, 1150 Core Clock
thats high wattage u need to undervolt Just Redid my settings and came out better: 1015 H/s 7 MSI RX470s 968 Watts at the wall 68 ave Watts (MSI Afterburner) 57C ave GPU Temp (MSI Afterburner) 49C CPU Temp 1500 Strap MSI Afterburner settings: 1950 Memory Clock, 1200 Core Clock My main goal is profitability = W/Hs (less is better) Previously I was at .97 W/Hs I am now at .95 W/Hs To Undervolt I would loose efficiency and hashrate. I also get more Hs and no Errors/Rejects! Very Stable as well. I'm getting the same hash with 1270 core 1750 mem. You don't need to increase mem that much (well, at least for now where claymore rather released with higher intensities). Have a look at it. Cool! Mine are all 4gb. I am using 1200 core 1950 mem. Very interesting! I am wondering the differences? Mine are all 4gb too. Basically, latest miners (claymore v5, v6, optiminer) seems to be hungry for the computing, probably because of the competetion software developers are rather taking the fastest way and push the system limits to increase the speed in a day or so. Check out nerdralph's theory here: https://bitcointalk.org/index.php?topic=1682003.0
|
|
|
|
|
Vasyok55555
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 05:00:12 PM |
|
Oчeнь мнoгo oшибoчныx шapoв.
|
|
|
|
N8sNathan
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 05:18:16 PM |
|
Can someone please explain to me how to set the environment variables. Do i set it computer wide, or is it code for when I start the miner?
I want to make sure I have the instructions below set correctly.
Catalyst (Crimson) 15.12 is required for best performance and compatibility. You can get very bad results for different drivers version, or miner can fail on startup. Set the following environment variables, especially if you have 2GB cards:
GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
|
|
|
|
delle54
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 05:22:04 PM |
|
wich one is the best for rx470 win10 The newest crimson drivers. 15.12 only works with older cards.
|
|
|
|
suggsy89
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 05:24:13 PM |
|
Can someone please explain to me how to set the environment variables. Do i set it computer wide, or is it code for when I start the miner?
I want to make sure I have the instructions below set correctly.
Catalyst (Crimson) 15.12 is required for best performance and compatibility. You can get very bad results for different drivers version, or miner can fail on startup. Set the following environment variables, especially if you have 2GB cards:
GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
|
|
|
|
Marvell1
Legendary
Offline
Activity: 2506
Merit: 1122
Leading Crypto Sports Betting & Casino Platform
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 05:24:56 PM |
|
Why is devfee finding so much more shares so much faster? Because of a different pool? I'm mining on suprnova
When you switch pools, difficulty starts off low and then ramps up. Switch to mining at flypool and you'll probably get considerably better returns. why is flypool so much better
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
N8sNathan
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 05:26:14 PM |
|
Can someone please explain to me how to set the environment variables. Do i set it computer wide, or is it code for when I start the miner?
I want to make sure I have the instructions below set correctly.
Catalyst (Crimson) 15.12 is required for best performance and compatibility. You can get very bad results for different drivers version, or miner can fail on startup. Set the following environment variables, especially if you have 2GB cards:
GPU_FORCE_64BIT_PTR 0 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 Thanks a lot!
|
|
|
|
hell696969
Jr. Member
Offline
Activity: 55
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 05:42:42 PM |
|
|
|
|
|
toptek
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 05:44:57 PM |
|
to bad i can't that in the US at that price best i can do right now for a 470 8gb is 199 on amazons US site . i can get a power color 480 4 gb on new eggs us site for 189 $ . it's hard to decide the 470 for 199 with 8gb or the 480 for 189 with 4 gb both have free shipping to me . MY bad sorry just noticed thought your add said 8gb . i can get 470's for less with 4gb in the US . To answer you question yup there worth the money, i have three RX 470 4gb .
|
|
|
|
vectisitch
Legendary
Offline
Activity: 1927
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 05:53:59 PM |
|
check the time spent mining rather than the shares. should be roughly 90 seconds
|
|
|
|
nowaltcoin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2016, 05:59:10 PM |
|
Dear Claymore , nice development. My HD8670M (Notebook 2Gb) has been moved from 3,9 H/s to 8,4 H/s in the newest version and the Notebook takes the same power from the wall !! Is there any possibility to get your Miner running on a 1GB AMD Card ? My old rig ( 6 * 7790 1GB) is waiting for it desperatly ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) From the specification the HD7790 should have four times the speed of my embedded AMD Card At the moment i can only use the nheqminer 0.4b that brings me 32 H/s (for all 6 card together) With your miner it should be 210 H/s..... Would be very nice Please keep on going.............. Edit was here fo typos Version 1 works on 1GB cards. Of course it will be a lot slower though.... Not sure about other versions. You may also try Windows ports of SilentArmy, I don't know their memory usages. Still would be slower than Claymore. Sorry no version from V1 to V6 is working for me and my 1G 7790 Rig !
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
|