Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[nevermind41]

I live problem with 9.2. Gpu0 crash in my 3 rigs. All of them 6 X 8 gb 470 nitro. I still use 9.0 without any problem. I think users who have 6 rx vga on their rigs have same problem.

[wll1rah]

RX 480 8G doing 265-270 sol , stock miner settings, 1165 core, 2000 mem
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.

Ubuntu 14.04

nice job Claymore


Greetings

How did u get this hashes on 480???265-270! omg... did u use reference one?

me to considering the drivers Claymore says use don't support 480 ? . if he using mixed cards thats got to be hard and take lot of time to set up right.

I'll stay with windows because end the end they all about the same .

With Linux you'll need Tahiti, R9 280 or better cards, for easier setup with the RX series, weird though that they choose to leave the 78xx/ 79xx of Tahiti's out though.

[pehoko]

Gpu load 96-97% is it regular or normal?

[tide881155]

I have just 225 s/h on my ref rx 480 8gb. I am using eliovp rom... Energylowok. Plz who can help to link rom atleast ~245 s/h? I have two kids, i do not have any time for experimenting with timing with my 34 rx 480:(

[KrokoTill]

I think, that Claymore can stop develop new version of miner. This h|s is ok. Yeap?

If he still getting developer fee then he should still develop more

To use analogy - if you are going to cinema to see your favorite movie second or third time, do you expect to see new version of it each time?

[KrokoTill]

Anyone know why R7 370 has 4GB's of ram but reports as 3GB's with this miner was doing this in earlier versions as well?

Why - no idea. And yes, it has been so in all versions

[arielbit]

v9.2

280x    ~220H/s
390      ~325H/s
290x    ~315H/s
Fury     ~350H/s
480      ~260H/s

stock bios, overclocked, 16.10.3

480 reference overclock?

his roaring oc

[toptek]

Quote from: tide881155 on December 22, 2016, 10:32:25 PM
I have just 225 s/h on my ref rx 480 8gb. I am using eliovp rom... Energylowok. Plz who can help to link rom atleast ~245 s/h? I have two kids, i do not have any time for experimenting with timing with my 34 rx 480:(


Look here or ask here https://forum.z.cash/t/anoraks-vbios-collection-optimized-settings-for-performance-power-saving/8347 for zec Mining modded bios .

you can get some real good help here with no Issues.  id offer some help but my bios is custom, i did it my self for a power color red dragon 480 4gb and don't like offer to do it for anyone for  reason beyond my control that card was a bitch to get just right .
I even bricked it a few times trying different bios setting.

RX 480 8G doing 265-270 sol , stock miner settings, 1165 core, 2000 mem
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.

Ubuntu 14.04

nice job Claymore


Greetings

How did u get this hashes on 480???265-270! omg... did u use reference one?

me to considering the drivers Claymore says use don't support 480 ? . if he using mixed cards thats got to be hard and take lot of time to set up right.

I'll stay with windows because end the end they all about the same .

With Linux you'll need Tahiti, R9 280 or better cards, for easier setup with the RX series, weird though that they choose to leave the 78xx/ 79xx of Tahiti's out though.

SO the drivers work with the R9 280 non X version that work with the RX 400 series now ?. and your right it depends on what card you are trying to use . .

I haven't tired  the new amdgpupro drivers yet or looked at what they support with 16.5 some thing or some thing like that.

I'll check .

thanks top .

[amfofo]

i have 3 rigs with rx 480, 390, 390x and 7990 all working fine thc Claymore

whats your hashrate with 7990?

[grendel25]

Claymore, you are awesome!

[Gogreen]

Been mining with v9.1 so far it is stable, i also order this baby from ebayto try out because my MB has only 4 pci-e slots. so i got this to add more GPU!



The device card also uses the United States Pericom Pericom PI7C9X bridge chip, for switching PCI-E, PCI-E between.
But even USB 3.0, but also the theoretical bandwidth 5Gbps (625MB / s), one Into four Then remove the loss would only 150MB / s, and even PCI-E 1.x single-channel bandwidth also has 250MB / s, So this stuff more than enough to give you the best slots, there will not be enough bandwidth, not only for the performance requirements of the place. Therefore, the transferred PCI-E slot is the best version above 2.0, the 3.0 version is better.

See installation or you can Order here ->    http://tinyurl.com/gmclx9n 

Which mobo are you using? Z170 chipset??

i have one of these things laying around i ordered it a while back
i got a board that also only allows four cards , do u have to supply power

to it cia the sata cable?

same like pluging into your sata power. no need extra power supply.

[DebitMe]

Any advice, how would I get this to auto start up when Windows 10 starts up?

[muchoman]

Any advice, how would I get this to auto start up when Windows 10 starts up?

I'm using this one
http://www.z-cron.com/

windows task scheduler doe's not work for me

[golden0707]

Any advice, how would I get this to auto start up when Windows 10 starts up?

Hi! Create a link to .bat-file, run shell:common startup , place in this windows . Thats it.

[awrelll]

Hello, any linux users ? What drivers do you use ? Is it working on Ubuntu 16 + amdgpupro ?
Thanks !

[niko2004x]

Hello, any linux users ? What drivers do you use ? Is it working on Ubuntu 16 + amdgpupro ?
Thanks !

Ubuntu 16 + amdgpupro + rx series card gives me immediate segfault.

[awrelll]

Hello, any linux users ? What drivers do you use ? Is it working on Ubuntu 16 + amdgpupro ?
Thanks !

Ubuntu 16 + amdgpupro + rx series card gives me immediate segfault.

I feel your pain !   {Update - Reinstalling the amd driver fixed it}

[Xardas2014]

Any advice, how would I get this to auto start up when Windows 10 starts up?

Hi! Create a link to .bat-file, run shell:common startup , place in this windows . Thats it.

That solution will not work if you have a user password. Unfortunately I'm stuck in that situation on one rig(windows isn't registered so it won't let me remove the password) and I have to teamviewer in, which gets windows to the desktop, so the .bat in startfolder loads


EDIT: After posting my reply I reread and noticed a slight difference. I have my shortcut in shell:startup, not shell:common startup. I see that using common startup is in the ProgramData tree, instead of the AppData tree. So I'll have to test it.

[sammy007]

Dec 23 18:31:40 rig zecminer64[2097]: ZEC: Share accepted (2 ms)!
Dec 23 18:31:41 rig zecminer64[2097]: server: bind failed with error: 98, next attempt in 10sec...
Dec 23 18:31:51 rig zecminer64[2097]: server: bind failed with error: 98, next attempt in 10sec...

On linux. Any idea what is 98 error?

[golden0707]

Any advice, how would I get this to auto start up when Windows 10 starts up?

Hi! Create a link to .bat-file, run shell:common startup , place in this windows . Thats it.

That solution will not work if you have a user password. Unfortunately I'm stuck in that situation on one rig(windows isn't registered so it won't let me remove the password) and I have to teamviewer in, which gets windows to the desktop, so the .bat in startfolder loads


EDIT: After posting my reply I reread and noticed a slight difference. I have my shortcut in shell:startup, not shell:common startup. I see that using common startup is in the ProgramData tree, instead of the AppData tree. So I'll have to test it.

Hmmmm.... I have same situation. W 10 with teamviewer, Windows not registered. Windows autostarts , .bat starts automaticaly.

All ive done : remove user password, remove power sleep, remove auto lock screen, put link in autostart. Have hardware watchdog installed and all going fine for months.