Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[nu2mining]

Hello

I was wondering if anyone here can help me?
I am trying to run claymore 9.2 in ubuntu linux and I have 2 questions.

1.  How does one set the environmental variables like GPU_MAX_ALLOC_PERCENT 100?  do I put them in the config file?  and how do i put them in the config file?  putting setx GPU_MAX_ALLOC_PERCENT 100, or -GPU_MAX_ALLOC_PERCENT 100 or GPU_MAX_ALLOC_PERCENT=100 all give an error..

2. when I run the miner I get "AMD ADL library not found"
but i have AMD APP SDK installed so how do i get claymore to use AMD ADL?

Thanks!

[nigttran]

Increase hashrate are wasted your powers. Profit is depend on luck of your pool.

Ex. If your hashrate is 5 Khash, profit is 0.7Zec/day at difficull 850.xxx.xxx, and found 75 blocks/day. When your pool hashrate is 4500 Khash (global about 44 000 khash). This is GOOD
- But you increase to 6 Khash (increase 20%). You just get 0.45zec/day at difficull 850.xxx.xxx if found 55 blocks/day. When your pool hashrate is 5500 Khash (increase 20%) global is 53000khash (increase 20%). This is very bad and waste your power.

Should not the hashrate race.

[nevermind41]

in linux how can you set the voltage settings?

[semajjames]

does anyone here know the stilt bios mods for r9 290/x  ?

[1234xm]

one question...

for mining ZEC is big difference to have

AMD rx 470 4gb

or

AMD rx 470 8GB ?

thx

[sp_]

Titan X Pascal - 590

The highend nvidia cards are now doing  600sol/s. I wonder if the upcomming vega boards can compete with that.

[omshree]

Titan X Pascal - 590

The highend nvidia cards are now doing  600sol/s. I wonder if the upcomming vega boards can compete with that.

produos doing 720@450w, titanx doing 590@300w , so by now they are more effective a bit. Yeah, lets see the vegas.

[nevermind41]

@linux users
Ho can you set up voltage settings?

[thedreamer]

one question...

for mining ZEC is big difference to have

AMD rx 470 4gb

or

AMD rx 470 8GB ?

thx

Almost zero difference.

[fittsy]

Hello

I was wondering if anyone here can help me?
I am trying to run claymore 9.2 in ubuntu linux and I have 2 questions.

1.  How does one set the environmental variables like GPU_MAX_ALLOC_PERCENT 100?  do I put them in the config file?  and how do i put them in the config file?  putting setx GPU_MAX_ALLOC_PERCENT 100, or -GPU_MAX_ALLOC_PERCENT 100 or GPU_MAX_ALLOC_PERCENT=100 all give an error..

2. when I run the miner I get "AMD ADL library not found"
but i have AMD APP SDK installed so how do i get claymore to use AMD ADL?

Thanks!

The variables go into a batch file.  There should be a start.bat in your Claymore folder.

You might update it to look something like this:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe

[lpedretti]

Stock GTX 1070 = 360 Sol/s @ 150 W
OC GTX 1070 (clock @ 2050, mem @ 4500) = 410 Sol/s @ 170 W
Efficient GTX 1070 (TDP 50%, mem @ 4500) = 330 Sol/s @ 95 W
dead AMD its near 
Nvidia rules

35% more expensive for 35% more hash.  We know.  You are not unleashing secrets here...

wrong, cost double of a 470 but it hash at double the speed or near that, the difference is the efficiency which is far greater

my 470 nitro 8g samsung mem are doing 260 each when properly tuned, so eff is lower but hashrate is more than half the 1070's

[Knepala]

Hello

I was wondering if anyone here can help me?
I am trying to run claymore 9.2 in ubuntu linux and I have 2 questions.

1.  How does one set the environmental variables like GPU_MAX_ALLOC_PERCENT 100?  do I put them in the config file?  and how do i put them in the config file?  putting setx GPU_MAX_ALLOC_PERCENT 100, or -GPU_MAX_ALLOC_PERCENT 100 or GPU_MAX_ALLOC_PERCENT=100 all give an error..

2. when I run the miner I get "AMD ADL library not found"
but i have AMD APP SDK installed so how do i get claymore to use AMD ADL?

Thanks!

The variables go into a batch file.  There should be a start.bat in your Claymore folder.

You might update it to look something like this:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe

Only for the windows version? Or does something like this also needs to happen in Ubuntu?

[lpedretti]

xmr/zec merged mining would be sooo nice

[Le_Bleu]

Stock GTX 1070 = 360 Sol/s @ 150 W
OC GTX 1070 (clock @ 2050, mem @ 4500) = 410 Sol/s @ 170 W
Efficient GTX 1070 (TDP 50%, mem @ 4500) = 330 Sol/s @ 95 W
dead AMD its near 
Nvidia rules

35% more expensive for 35% more hash.  We know.  You are not unleashing secrets here...

wrong, cost double of a 470 but it hash at double the speed or near that, the difference is the efficiency which is far greater

my 470 nitro 8g samsung mem are doing 260 each when properly tuned, so eff is lower but hashrate is more than half the 1070's

Could you share yours settings and BIOS ? I have the same card but only 240 sol/s.

[lpedretti]

Stock GTX 1070 = 360 Sol/s @ 150 W
OC GTX 1070 (clock @ 2050, mem @ 4500) = 410 Sol/s @ 170 W
Efficient GTX 1070 (TDP 50%, mem @ 4500) = 330 Sol/s @ 95 W
dead AMD its near 
Nvidia rules

35% more expensive for 35% more hash.  We know.  You are not unleashing secrets here...

wrong, cost double of a 470 but it hash at double the speed or near that, the difference is the efficiency which is far greater

my 470 nitro 8g samsung mem are doing 260 each when properly tuned, so eff is lower but hashrate is more than half the 1070's

Could you share yours settings and BIOS ? I have the same card but only 240 sol/s.

I don't have the bios file at hand, but the only thing i did was use the 1750 straps for 2000 mhz.
For zec, with wattool i took the gpu to 1420 and left the memory at 2000, i had to give them like around 50mv overvolt, but even with the straps mod i could downvolt the mem to 0.95 so it's not much of a difference with the default tdp.
For Eth, i left the gpu at 1360 and instead took the mem to 2190, i had to do some serious overvolt there, 1.12, not all of them reached 2190, some did 2180, but they ended throwing 30.3mh/s on eth, stable, several days now. No dual mining.

Hope it helps!

[Wexnident]

xmr/zec merged mining would be sooo nice

That will not happen. They use simlar components.

[nu2mining]

Hello

I was wondering if anyone here can help me?
I am trying to run claymore 9.2 in ubuntu linux and I have 2 questions.

1.  How does one set the environmental variables like GPU_MAX_ALLOC_PERCENT 100?  do I put them in the config file?  and how do i put them in the config file?  putting setx GPU_MAX_ALLOC_PERCENT 100, or -GPU_MAX_ALLOC_PERCENT 100 or GPU_MAX_ALLOC_PERCENT=100 all give an error..

2. when I run the miner I get "AMD ADL library not found"
but i have AMD APP SDK installed so how do i get claymore to use AMD ADL?

Thanks!

The variables go into a batch file.  There should be a start.bat in your Claymore folder.

You might update it to look something like this:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe

Thats windows, im asking about ubuntu, but thanks for the offered solution... i already know how to do it in windows...

also wondering about hte AMD ADL Library - using rx400 series cards and AMD APP SDK 3.0

[Steve Wozniak]

are you working on a merged mining miner for ZEC and another coin Claymore?

[grizscom]

Good time of day, colleagues.

I have a problem with Ubuntu 16.04, RX480 and amdgpu pro driver by using the latest 9.2 version for Linux.
dmesg:

Code:

[  311.260341] VM fault (0x14, vmid 5) at page 1452397, write from 'TC2' (0x54433200) (200)
[  311.260347] amdgpu 0000:07:00.0: GPU fault detected: 146 0x0b6a4814
[  311.260348] amdgpu 0000:07:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x0016296C
[  311.260349] amdgpu 0000:07:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0B088014
[  311.260351] VM fault (0x14, vmid 5) at page 1452396, write from 'TC6' (0x54433600) (136)

How can I stop this, because it is overload disk space at runtime.
Thanks for your replay.

[Qazo]

guys

does dwarf eu server still have problems?