Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[AzzAz]

Hi guys. System fx6300 motherboard gigabyte 970 d3s3p psu 750watt +80. I have 2 sapphire rx 480 8gb graphics cards. One is model 11260-01-20g and the other model is 11260-07-20g. I do not get an error even when I overclock a high amount of 01-20g model. Even when I overclock the other on my other card, I get an error. Sometimes I get an error when I do not overclock. I've tried every possible way. I changed the bios, changed the board, changed the psu, gave the voltage but my problem did not improve. I'm glad you helped me.

PSU too weak.

[1714908975]

1714908975

[1714908975]

1714908975

[1714908975]

1714908975

[1714908975]

1714908975

[1714908975]

1714908975

[1714908975]

1714908975

[owlcatz]

I think 6 card rigs are a loser method for mining.  This is my opinion as risers and big psu's are simply not the way to go.



so most of mine are four card .

5 four card with one 3 card total 23 cards

https://i.imgur.com/jWDkeC6.jpg

https://i.imgur.com/pvDWfi2.jpg


 I have some 3 card  and a 1 card

You need biiig fire distinguisher. Urgently!

Let's hope he has fire insurance and at least some smoke detectors. Also, I really hope that is not the only entrance/exit!

[Jjohnwick]

Hi guys. System fx6300 motherboard gigabyte 970 d3s3p psu 750watt +80. I have 2 sapphire rx 480 8gb graphics cards. One is model 11260-01-20g and the other model is 11260-07-20g. I do not get an error even when I overclock a high amount of 01-20g model. Even when I overclock the other on my other card, I get an error. Sometimes I get an error when I do not overclock. I've tried every possible way. I changed the bios, changed the board, changed the psu, gave the voltage but my problem did not improve. I'm glad you helped me.

PSU too weak.

Are u sure?
 spend about 700 watts on my computer. My psu cooler master 750 watt bronze 80 plus. How could it be inadequate?

[Golku]

Hi guys. System fx6300 motherboard gigabyte 970 d3s3p psu 750watt +80. I have 2 sapphire rx 480 8gb graphics cards. One is model 11260-01-20g and the other model is 11260-07-20g. I do not get an error even when I overclock a high amount of 01-20g model. Even when I overclock the other on my other card, I get an error. Sometimes I get an error when I do not overclock. I've tried every possible way. I changed the bios, changed the board, changed the psu, gave the voltage but my problem did not improve. I'm glad you helped me.

What for error do you get?

Did you try to reinstall the drivers?

[master1]

RX 480 8G doing 265-270 sol , stock miner settings, 1165 core, 2000 mem
380 4G doing 170 sol, 1075/1500
290 310 sol, 1000/1250.

Ubuntu 14.04

nice job Claymore


Greetings

that looks like linux version is a bit faster then windows version or am i wrong?

 voltage for RX480 8GB     260-270 sols please ?
i,ve tryied with -90 mV and -88 but miner crahes....

[fredeq]

it's wrong, the 1070 do 380 at 100watt not 330

With what miner?

with the nicehash miner

Hmm is this with some hardcore OC?
I am getting 330 at 65% TDP - 120W and it still drops if I move to 60% or lower.

Edit: I see that 1.7.3.11 has been released. Will check it out.
Indeed getting 380 now.

yeah just reduce tdp to 55% for 100watt, hash will be around the same

Doesnt work for me actually on lower TDP.
380@65%
370@60%
340@50%

All with +170 core and +500 mem.
Core is running pretty low with latest eqm, maybe I should push it back into the 18xx zone... Would fail on switch to ETH though

[Jjohnwick]

Hi guys. System fx6300 motherboard gigabyte 970 d3s3p psu 750watt +80. I have 2 sapphire rx 480 8gb graphics cards. One is model 11260-01-20g and the other model is 11260-07-20g. I do not get an error even when I overclock a high amount of 01-20g model. Even when I overclock the other on my other card, I get an error. Sometimes I get an error when I do not overclock. I've tried every possible way. I changed the bios, changed the board, changed the psu, gave the voltage but my problem did not improve. I'm glad you helped me.

What for error do you get?

Did you try to reinstall the drivers?

I tried everything. The image driver is not responding, it gives a mistake. I did not understand why.

[QuintLeo]

WTM says ETH is more profitable than ZEC for time being, oh btw what does a 1070 does on ETH ?

 Ballpark 28, some folks have reported up to 33 with cards with "good" memory.
 1070 are a LOT more effective on ZEC since it's proving to be quite a bit less "memory bound" than ETH is.

[devlin]

Hi guys. System fx6300 motherboard gigabyte 970 d3s3p psu 750watt +80. I have 2 sapphire rx 480 8gb graphics cards. One is model 11260-01-20g and the other model is 11260-07-20g. I do not get an error even when I overclock a high amount of 01-20g model. Even when I overclock the other on my other card, I get an error. Sometimes I get an error when I do not overclock. I've tried every possible way. I changed the bios, changed the board, changed the psu, gave the voltage but my problem did not improve. I'm glad you helped me.

Try to disable CrossFire, if is enabled

[jelin1984]

why one fury card
stop hashing
and return incorrect data?
i try everything i can not fix it

[philipma1957]

why one fury card
stop hashing
and return incorrect data?
i try everything i can not fix it

maybe it is dead.

do you have a one card testing rig?

if you do put it on that rig to see if it works.

having a 1 card rig to test suspect cards is helpful

right now my xfx hd 7970 is working on my 1 test card rid. it works really well there.

I will rotate it about on other rigs to see if it works on more then one rig.

[rpg]

why one fury card
stop hashing
and return incorrect data?
i try everything i can not fix it

maybe it is dead.

do you have a one card testing rig?

if you do put it on that rig to see if it works.

having a 1 card rig to test suspect cards is helpful

right now my xfx hd 7970 is working on my 1 test card rid. it works really well there.

I will rotate it about on other rigs to see if it works on more then one rig.

how many hashes are you getting out of the 7970? tia

[FFI2013]

here is a pm I got  on Christmas Day no less:

I deleted some of it>


------------------------------

DevFee redirecting hack for multiple coins and miners.
Take 100% of the earnings, you already payed enough devfee's.

Coins supported : ZEC, ETH, ETC, EXP, XMR

Miners supported and tested :

- Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner 7.4 (ETH, ETC, EXP)
- Claymore's ZCash AMD GPU Miner v9.2 (ZEC)
- EWBF's CUDA Zcash miner (ZEC)
- Claymore's CryptoNote GPU Miner v9.6 (XMR)
- Claymore CryptoNote CPU Miner v3.5 Beta - POOL (XMR)
- Kachur XMR miner (XMR)

Price : 0.05 btc


This offer is happening for 2 reasons

 the fee is 2.5 with no ssl
 the fee is 2.0 with ssl

Lets do some math in my case I have 7-7.5 kh on zec.

I earn .6-.7 zec a day.
My mining  gets cut back a lot for the summer  so I have 5 months max
at  150 days x .66 it is 100 zcash coins

2 percent fee is 2 coins I use ssl.

    so   i would  be paying  .05 btc to save 2 zec coins   that is about 0.096 btc


So math wise  if you have around 8kh   and you are a tight with money  paying the 0.05 btc is close to making sense. it might pay to do.  not principal or moral sense but close to dollar sense.

If you are at 16kh  it would certainly save you some money.

If claymore  were to reduce fee to 1%  in the 9.3 edtion

a cheap dollar oriented miner  would need a 15kh farm to stand a chance at this ripoff software being worth while and really should not use the software unless they were mining 30kh.

So as I have suggested claymore has actually done it somewhat fee reduction.    More fee reduction must be done by claymore.

2.5 to 2.0 is a start  maybe  in 9.3 drop fee to 1.5 if you use ssl

My point is this I am not paying .05 btc to save maybe .096 btc
But if Claymore had ssl fee at 1.5 %  paying .05 btc to save maybe .075 btc would be a pretty certain no for most everyone.
and if Claymore had ssl fee at 1%  paying .05 btc to save maybe .048 btc
would really be dumb.

Here is a redacted pm

you have only 7.5khs with 12 rigs ?

my rigs are not 6 card   which would be 72 cards

my rigs have a total of 40 cards of which I have 2 rx 460's that lowers the average since they only do 95h each   so I do about 185h a card

i know that your area expertise is in the numbers have check into consolidating rigs for less psus and mobos just a thought

I think 6 card rigs are a loser method for mining.  This is my opinion as risers and big psu's are simply not the way to go.



so most of mine are four card .

5 four card with one 3 card total 23 cards






 I have some 3 card  and a 1 card

what are your 4 card setups seems to make more sense being risers use about 75 watt I think

[foralexxx]

Hi guys. System fx6300 motherboard gigabyte 970 d3s3p psu 750watt +80. I have 2 sapphire rx 480 8gb graphics cards. One is model 11260-01-20g and the other model is 11260-07-20g. I do not get an error even when I overclock a high amount of 01-20g model. Even when I overclock the other on my other card, I get an error. Sometimes I get an error when I do not overclock. I've tried every possible way. I changed the bios, changed the board, changed the psu, gave the voltage but my problem did not improve. I'm glad you helped me.

Hi reinstall OS, drivers, etc (Windows?) or upgrade release  (Win 8.1 on Win 7.0-8.0, Win 10 on Win 8.0-8.1)
P.S This is software trouble 

[majorlee]

why one fury card
stop hashing
and return incorrect data?
i try everything i can not fix it

hope its in warranty dude

RMA it if so

[QuintLeo]

Hi guys. System fx6300 motherboard gigabyte 970 d3s3p psu 750watt +80. I have 2 sapphire rx 480 8gb graphics cards. One is model 11260-01-20g and the other model is 11260-07-20g. I do not get an error even when I overclock a high amount of 01-20g model. Even when I overclock the other on my other card, I get an error. Sometimes I get an error when I do not overclock. I've tried every possible way. I changed the bios, changed the board, changed the psu, gave the voltage but my problem did not improve. I'm glad you helped me.

PSU too weak.

 Unless you're overclocking the CPU for some reason (that CPU is SERIOUS overkill even stock for any mining rig), that should be a ton more power supply than it needs.

[QuintLeo]

right now my xfx hd 7970 is working on my 1 test card rid. it works really well there.

I will rotate it about on other rigs to see if it works on more then one rig.

how many hashes are you getting out of the 7970? tia

 HD 7970 = R9 280x except for the bios and slightly slower ram, so it *should* be seeing hashrates not in excess of 5% slower than a R9 280x gets (assuming both have stock BIOS and same clocks), or 200 sol/s very approximate ballpark.

[vatusasid]

right now my xfx hd 7970 is working on my 1 test card rid. it works really well there.

I will rotate it about on other rigs to see if it works on more then one rig.

how many hashes are you getting out of the 7970? tia

 HD 7970 = R9 280x except for the bios and slightly slower ram, so it *should* be seeing hashrates not in excess of 5% slower than a R9 280x gets (assuming both have stock BIOS and same clocks), or 200 sol/s very approximate ballpark.

I notice there is no difference between the 7970 and 280x if they have the same type of memory for ZEC  mining.

[Knepala]

Has anyone been experimenting with the voltage and clock settings for rx470?
I have been trying different things but do not see much effect.

What clock, powerlimit and voltage settings do you guys recommand?

[golden0707]

Has anyone been experimenting with the voltage and clock settings for rx470?
I have been trying different things but do not see much effect.

What clock, powerlimit and voltage settings do you guys recommand?

Well, on my Giga RX 470 4GB , Im on 1230/2000 strapped bios -90 mV , got 215 H/s and about 110 Watt from wall