imunisasi
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 86
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 11:22:17 AM |
|
here is a pm I got on Christmas Day no less: I deleted some of it> ------------------------------
DevFee redirecting hack for multiple coins and miners. Take 100% of the earnings, you already payed enough devfee's.
Coins supported : ZEC, ETH, ETC, EXP, XMR
Miners supported and tested :
- Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner 7.4 (ETH, ETC, EXP) - Claymore's ZCash AMD GPU Miner v9.2 (ZEC) - EWBF's CUDA Zcash miner (ZEC) - Claymore's CryptoNote GPU Miner v9.6 (XMR) - Claymore CryptoNote CPU Miner v3.5 Beta - POOL (XMR) - Kachur XMR miner (XMR)
Price : 0.05 btc This offer is happening for 2 reasons the fee is 2.5 with no ssl the fee is 2.0 with ssl Lets do some math in my case I have 7-7.5 kh on zec. I earn .6-.7 zec a day. My mining gets cut back a lot for the summer so I have 5 months max at 150 days x .66 it is 100 zcash coins 2 percent fee is 2 coins I use ssl. so i would be paying .05 btc to save 2 zec coins that is about 0.096 btc So math wise if you have around 8kh and you are a tight with money paying the 0.05 btc is close to making sense. it might pay to do. not principal or moral sense but close to dollar sense. If you are at 16kh it would certainly save you some money. If claymore were to reduce fee to 1% in the 9.3 edtion a cheap dollar oriented miner would need a 15kh farm to stand a chance at this ripoff software being worth while and really should not use the software unless they were mining 30kh. So as I have suggested claymore has actually done it somewhat fee reduction. More fee reduction must be done by claymore. 2.5 to 2.0 is a start maybe in 9.3 drop fee to 1.5 if you use ssl My point is this I am not paying .05 btc to save maybe .096 btc But if Claymore had ssl fee at 1.5 % paying .05 btc to save maybe .075 btc would be a pretty certain no for most everyone. and if Claymore had ssl fee at 1% paying .05 btc to save maybe .048 btc would really be dumb. Here is a redacted pm ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FWaN1TOP.png&t=665&c=XBxMCo0RWfRTeA) you have only 7.5khs with 12 rigs ? my rigs are not 6 card which would be 72 cards my rigs have a total of 40 cards of which I have 2 rx 460's that lowers the average since they only do 95h each so I do about 185h a card i know that your area expertise is in the numbers have check into consolidating rigs for less psus and mobos just a thought I think 6 card rigs are a loser method for mining. This is my opinion as risers and big psu's are simply not the way to go. so most of mine are four card . 5 four card with one 3 card total 23 cards ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FjWDkeC6.jpg&t=665&c=F5CggWOPOQN3tQ) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FpvDWfi2.jpg&t=665&c=8puE3MzZswLa6g) I have some 3 card and a 1 card are you use 1 motherboard for it ?
|
|
|
|
Knepala
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 12:01:06 PM |
|
Has anyone been experimenting with the voltage and clock settings for rx470? I have been trying different things but do not see much effect.
What clock, powerlimit and voltage settings do you guys recommand?
Well, on my Giga RX 470 4GB , Im on 1230/2000 strapped bios -90 mV , got 215 H/s and about 110 Watt from wall Thank you for the quick response. I am very new to mining. -90 Mv, how much is that for the cclock parameter? I now have intensity at 6, powlim at -50, clock at 1200 and mclock at 2000. Getting an average of 194 sols per card. Do you happen to know where I can find a good strapping guide for rx470?
|
|
|
|
golden0707
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 12:45:19 PM |
|
Has anyone been experimenting with the voltage and clock settings for rx470? I have been trying different things but do not see much effect.
What clock, powerlimit and voltage settings do you guys recommand?
Well, on my Giga RX 470 4GB , Im on 1230/2000 strapped bios -90 mV , got 215 H/s and about 110 Watt from wall Thank you for the quick response. I am very new to mining. -90 Mv, how much is that for the cclock parameter? I now have intensity at 6, powlim at -50, clock at 1200 and mclock at 2000. Getting an average of 194 sols per card. Do you happen to know where I can find a good strapping guide for rx470? Theres alot of it in the Internet. Iv used that one https://www.youtube.com/watch?v=OP_zSP2H6ho to modify bios for ETH mining. Got 28.5 Mhs About undervolting - im using MSI Afterburner to control everything related clocks, voltage and fan speed
|
|
|
|
Jjohnwick
Newbie
Offline
Activity: 39
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 12:47:05 PM |
|
Hi guys. System fx6300 motherboard gigabyte 970 d3s3p psu 750watt +80. I have 2 sapphire rx 480 8gb graphics cards. One is model 11260-01-20g and the other model is 11260-07-20g. I do not get an error even when I overclock a high amount of 01-20g model. Even when I overclock the other on my other card, I get an error. Sometimes I get an error when I do not overclock. I've tried every possible way. I changed the bios, changed the board, changed the psu, gave the voltage but my problem did not improve. I'm glad you helped me.
PSU too weak. Unless you're overclocking the CPU for some reason (that CPU is SERIOUS overkill even stock for any mining rig), that should be a ton more power supply than it needs. I tried overclocking at xmr. its fine. Maybe my graphic card is giving an error because zec is pushing too much. For more power. thanks for help guys.
|
|
|
|
nerdralph
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 01:45:58 PM |
|
Maybe you don't have such a sense of humor... You also don't seem to understand how copyright law works. It restricts copying, not reverse engineering.
It seems you should learn a bit. The License file is a part of miner package. Besides copyrights, it also describes what you may do and what you may not. Do you state that you may ignore "License.txt"? If so, that's what I mean when I say that some devs don't respect licenses. You are almost paranoid about people learning how your code works, yet it's been over a month since I publicly described how to implement a ZEC miner that is significantly faster than yours. Then why do not you do a miner ? There hasn't been enough incentive to do it. If someone offered a large enough payment, I could write a Linux ZEC miner that is at least 10% faster than Claymore 9.2, and probably have it finished in under 30 days.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8451
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 01:47:12 PM |
|
here is a pm I got on Christmas Day no less: I deleted some of it> ------------------------------
DevFee redirecting hack for multiple coins and miners. Take 100% of the earnings, you already payed enough devfee's.
Coins supported : ZEC, ETH, ETC, EXP, XMR
Miners supported and tested :
- Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner 7.4 (ETH, ETC, EXP) - Claymore's ZCash AMD GPU Miner v9.2 (ZEC) - EWBF's CUDA Zcash miner (ZEC) - Claymore's CryptoNote GPU Miner v9.6 (XMR) - Claymore CryptoNote CPU Miner v3.5 Beta - POOL (XMR) - Kachur XMR miner (XMR)
Price : 0.05 btc This offer is happening for 2 reasons the fee is 2.5 with no ssl the fee is 2.0 with ssl Lets do some math in my case I have 7-7.5 kh on zec. I earn .6-.7 zec a day. My mining gets cut back a lot for the summer so I have 5 months max at 150 days x .66 it is 100 zcash coins 2 percent fee is 2 coins I use ssl. so i would be paying .05 btc to save 2 zec coins that is about 0.096 btc So math wise if you have around 8kh and you are a tight with money paying the 0.05 btc is close to making sense. it might pay to do. not principal or moral sense but close to dollar sense. If you are at 16kh it would certainly save you some money. If claymore were to reduce fee to 1% in the 9.3 edtion a cheap dollar oriented miner would need a 15kh farm to stand a chance at this ripoff software being worth while and really should not use the software unless they were mining 30kh. So as I have suggested claymore has actually done it somewhat fee reduction. More fee reduction must be done by claymore. 2.5 to 2.0 is a start maybe in 9.3 drop fee to 1.5 if you use ssl My point is this I am not paying .05 btc to save maybe .096 btc But if Claymore had ssl fee at 1.5 % paying .05 btc to save maybe .075 btc would be a pretty certain no for most everyone. and if Claymore had ssl fee at 1% paying .05 btc to save maybe .048 btc would really be dumb. Here is a redacted pm ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FWaN1TOP.png&t=665&c=XBxMCo0RWfRTeA) you have only 7.5khs with 12 rigs ? my rigs are not 6 card which would be 72 cards my rigs have a total of 40 cards of which I have 2 rx 460's that lowers the average since they only do 95h each so I do about 185h a card i know that your area expertise is in the numbers have check into consolidating rigs for less psus and mobos just a thought I think 6 card rigs are a loser method for mining. This is my opinion as risers and big psu's are simply not the way to go. so most of mine are four card . 5 four card with one 3 card total 23 cards ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FjWDkeC6.jpg&t=665&c=F5CggWOPOQN3tQ) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FpvDWfi2.jpg&t=665&c=8puE3MzZswLa6g) I have some 3 card and a 1 card are you use 1 motherboard for it ? I like this mobo for the four card rigs biostar z170 http://www.newegg.com/Product/Product.aspx?Item=N82E16813138421you can read my review on newegg Philip A.
|
|
|
|
rpg
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 01:55:18 PM |
|
right now my xfx hd 7970 is working on my 1 test card rid. it works really well there.
I will rotate it about on other rigs to see if it works on more then one rig.
how many hashes are you getting out of the 7970? tia HD 7970 = R9 280x except for the bios and slightly slower ram, so it *should* be seeing hashrates not in excess of 5% slower than a R9 280x gets (assuming both have stock BIOS and same clocks), or 200 sol/s very approximate ballpark. that's it? I'm getting 225 sols out of a 7950. I would thought the 7970 would be close to 300. At 200 sols using 250 watts makes it a no no for zcash
|
|
|
|
agis6
Newbie
Offline
Activity: 27
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 02:16:44 PM |
|
Maybe you don't have such a sense of humor... You also don't seem to understand how copyright law works. It restricts copying, not reverse engineering.
It seems you should learn a bit. The License file is a part of miner package. Besides copyrights, it also describes what you may do and what you may not. Do you state that you may ignore "License.txt"? If so, that's what I mean when I say that some devs don't respect licenses. You are almost paranoid about people learning how your code works, yet it's been over a month since I publicly described how to implement a ZEC miner that is significantly faster than yours. Then why do not you do a miner ? There hasn't been enough incentive to do it. If someone offered a large enough payment, I could write a Linux ZEC miner that is at least 10% faster than Claymore 9.2, and probably have it finished in under 30 days. OK, how much for a 10% faster miner?
|
|
|
|
nerdralph
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 02:38:07 PM |
|
Then why do not you do a miner ?
There hasn't been enough incentive to do it. If someone offered a large enough payment, I could write a Linux ZEC miner that is at least 10% faster than Claymore 9.2, and probably have it finished in under 30 days. OK, how much for a 10% faster miner? 10BTC would be enough.
|
|
|
|
Zenixin
Jr. Member
Offline
Activity: 132
Merit: 2
MR06Q8ZM3194
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 02:40:08 PM |
|
right now my xfx hd 7970 is working on my 1 test card rid. it works really well there.
I will rotate it about on other rigs to see if it works on more then one rig.
how many hashes are you getting out of the 7970? tia HD 7970 = R9 280x except for the bios and slightly slower ram, so it *should* be seeing hashrates not in excess of 5% slower than a R9 280x gets (assuming both have stock BIOS and same clocks), or 200 sol/s very approximate ballpark. that's it? I'm getting 225 sols out of a 7950. I would thought the 7970 would be close to 300. At 200 sols using 250 watts makes it a no no for zcash The 7970 will not be that fast.
|
⌂ the SUITE | THE NEW GENERATION OF LOYALTY PROGRAM Visit : www.fidelitysuite.com
|
|
|
joaocha
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 03:35:19 PM |
|
Then why do not you do a miner ?
There hasn't been enough incentive to do it. If someone offered a large enough payment, I could write a Linux ZEC miner that is at least 10% faster than Claymore 9.2, and probably have it finished in under 30 days. OK, how much for a 10% faster miner? 10BTC would be enough. Sure you can
|
|
|
|
SparkIt
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 03:37:02 PM |
|
right now my xfx hd 7970 is working on my 1 test card rid. it works really well there.
I will rotate it about on other rigs to see if it works on more then one rig.
how many hashes are you getting out of the 7970? tia HD 7970 = R9 280x except for the bios and slightly slower ram, so it *should* be seeing hashrates not in excess of 5% slower than a R9 280x gets (assuming both have stock BIOS and same clocks), or 200 sol/s very approximate ballpark. that's it? I'm getting 225 sols out of a 7950. I would thought the 7970 would be close to 300. At 200 sols using 250 watts makes it a no no for zcash I've got between 230-240sol/s on my 280x's. How the f do you have 225 with a 7950?
|
|
|
|
rpg
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 03:56:30 PM |
|
right now my xfx hd 7970 is working on my 1 test card rid. it works really well there.
I will rotate it about on other rigs to see if it works on more then one rig.
how many hashes are you getting out of the 7970? tia HD 7970 = R9 280x except for the bios and slightly slower ram, so it *should* be seeing hashrates not in excess of 5% slower than a R9 280x gets (assuming both have stock BIOS and same clocks), or 200 sol/s very approximate ballpark. that's it? I'm getting 225 sols out of a 7950. I would thought the 7970 would be close to 300. At 200 sols using 250 watts makes it a no no for zcash I've got between 230-240sol/s on my 280x's. How the f do you have 225 with a 7950? OC to 1190/1575 @ 62C. It hashes between 220-226 with a GPU load of 97%
|
|
|
|
smaxz
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 430
Merit: 253
VeganAcademy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 04:41:18 PM |
|
7970 are terrible for zcash mining.. just pulled mine to save the electricity as zcash becomes less profitable.
|
- NGdTwHRSdnThdi1drQuHGT3khAHRtZ1HMq -
|
|
|
delle54
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 05:41:23 PM |
|
here is a pm I got on Christmas Day no less: I deleted some of it> ------------------------------
DevFee redirecting hack for multiple coins and miners. Take 100% of the earnings, you already payed enough devfee's.
Coins supported : ZEC, ETH, ETC, EXP, XMR
Miners supported and tested :
- Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner 7.4 (ETH, ETC, EXP) - Claymore's ZCash AMD GPU Miner v9.2 (ZEC) - EWBF's CUDA Zcash miner (ZEC) - Claymore's CryptoNote GPU Miner v9.6 (XMR) - Claymore CryptoNote CPU Miner v3.5 Beta - POOL (XMR) - Kachur XMR miner (XMR)
Price : 0.05 btc This offer is happening for 2 reasons the fee is 2.5 with no ssl the fee is 2.0 with ssl Lets do some math in my case I have 7-7.5 kh on zec. I earn .6-.7 zec a day. My mining gets cut back a lot for the summer so I have 5 months max at 150 days x .66 it is 100 zcash coins 2 percent fee is 2 coins I use ssl. so i would be paying .05 btc to save 2 zec coins that is about 0.096 btc So math wise if you have around 8kh and you are a tight with money paying the 0.05 btc is close to making sense. it might pay to do. not principal or moral sense but close to dollar sense. If you are at 16kh it would certainly save you some money. If claymore were to reduce fee to 1% in the 9.3 edtion a cheap dollar oriented miner would need a 15kh farm to stand a chance at this ripoff software being worth while and really should not use the software unless they were mining 30kh. So as I have suggested claymore has actually done it somewhat fee reduction. More fee reduction must be done by claymore. 2.5 to 2.0 is a start maybe in 9.3 drop fee to 1.5 if you use ssl My point is this I am not paying .05 btc to save maybe .096 btc But if Claymore had ssl fee at 1.5 % paying .05 btc to save maybe .075 btc would be a pretty certain no for most everyone. and if Claymore had ssl fee at 1% paying .05 btc to save maybe .048 btc would really be dumb. Here is a redacted pm ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FWaN1TOP.png&t=665&c=XBxMCo0RWfRTeA) you have only 7.5khs with 12 rigs ? my rigs are not 6 card which would be 72 cards my rigs have a total of 40 cards of which I have 2 rx 460's that lowers the average since they only do 95h each so I do about 185h a card i know that your area expertise is in the numbers have check into consolidating rigs for less psus and mobos just a thought I think 6 card rigs are a loser method for mining. This is my opinion as risers and big psu's are simply not the way to go. so most of mine are four card . 5 four card with one 3 card total 23 cards ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FjWDkeC6.jpg&t=665&c=F5CggWOPOQN3tQ) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FpvDWfi2.jpg&t=665&c=8puE3MzZswLa6g) I have some 3 card and a 1 card are you use 1 motherboard for it ? I like this mobo for the four card rigs biostar z170 http://www.newegg.com/Product/Product.aspx?Item=N82E16813138421you can read my review on newegg Philip A. If I see this correctly, your GPU's are sitting directly next to each other on the MoBo. This is very bad, since the cards radiate their heat into the fans of the cards right next to them. You have to use risers to separate them thermally!
|
|
|
|
nerdralph
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 05:44:27 PM |
|
Then why do not you do a miner ?
There hasn't been enough incentive to do it. If someone offered a large enough payment, I could write a Linux ZEC miner that is at least 10% faster than Claymore 9.2, and probably have it finished in under 30 days. OK, how much for a 10% faster miner? 10BTC would be enough. Sure you can I actually think I could get 25% faster performance, but would only promise 10% to play it safe. It would be even easier for Wolf to do it given his expertise with GCN assembler, but he seems to be having more fun doing other stuff.
|
|
|
|
Gasotard
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 06:02:20 PM |
|
Then why do not you do a miner ?
There hasn't been enough incentive to do it. If someone offered a large enough payment, I could write a Linux ZEC miner that is at least 10% faster than Claymore 9.2, and probably have it finished in under 30 days. OK, how much for a 10% faster miner? 10BTC would be enough. Sure you can I actually think I could get 25% faster performance, but would only promise 10% to play it safe. It would be even easier for Wolf to do it given his expertise with GCN assembler, but he seems to be having more fun doing other stuff. Can Claymore also do that?
|
|
|
|
nerdralph
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 06:22:28 PM |
|
OK, how much for a 10% faster miner?
10BTC would be enough. Sure you can I actually think I could get 25% faster performance, but would only promise 10% to play it safe. It would be even easier for Wolf to do it given his expertise with GCN assembler, but he seems to be having more fun doing other stuff. Can Claymore also do that? None of Claymore's miners (eth, zec, xmr) seem to use GCN assembler, even though people like Wolf and Realhet have been doing miner kernels in asm for at least a couple years now. https://realhet.wordpress.com/gcn-asm-groestl-coin-kernel/
|
|
|
|
marvykkio
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 06:30:32 PM |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FhC00RBd.jpg&t=665&c=jmCR1smVDdv0XQ) clean install with DDU, 16.11.5 drivers okay for 2 hours, also wrapped 10 minutes, after crashes and so I find the driver, I tried several times, but nothing more and negative results I tried to change the uprights, position scede video, but the result does not change, I left the rig so as you see, and it's working. someone understands us something?
|
|
|
|
rpg
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 27, 2016, 06:46:00 PM |
|
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FhC00RBd.jpg&t=665&c=jmCR1smVDdv0XQ) clean install with DDU, 16.11.5 drivers okay for 2 hours, also wrapped 10 minutes, after crashes and so I find the driver, I tried several times, but nothing more and negative results I tried to change the uprights, position scede video, but the result does not change, I left the rig so as you see, and it's working. someone understands us something? Ive been having a similar problem with my gigabyte g1 480. I get the black screen of dead. I suspect it maybe related to the PSU, but again on XMR there are no issues. Sometimes it runs for 15 minutes, others for several hours, now running for over 24 hours. This happens with or without overclocking.
|
|
|
|
|