Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[Diosel]

Dears
What is the best profitable pool  now for Z-chash

For Z-chash? Nanoplorl porbably 

http://www.site.com.ve/mlibre/Zchain%2030-01-2017.jpg

Here is your answer, because the system is based on rewards who wins the most opportunities, so I recommend https://zec.suprnova.cc, because it only has 1% of commission compared to 4% of f2pool Which although it obtains more packages has a very high commission.

[Diosel]

Dears
What is the best profitable pool  now for Z-chash

http://www.site.com.ve/mlibre/zchain.jpg

Here is your answer, because the system is based on rewards who wins the most opportunities, so I recommend https://zec.suprnova.cc, because it only has 1% of commission compared to 4% of f2pool Which although it obtains more packages has a very high commission.


 P.D. You can check out at this dir: https://explorer.zcha.in/statistics/miners

[fr4nkthetank]

I can recommend coinotron for Zcash, even though hashrate is smaller.  PPLNS is decent, and they have PPS at 3%.  worker notifications, etc.  I've never really had connection problems there (like dwarf, or sometimes coinmine).  Plus its not flypool, so there's that

[Corerj]

My rig show only GPU0 and GPU1 temp and fan, i have 2x 7990, under win 10, already tried all from catalyst 15.12 to 17.1(used ddu), tried all sort of config command(-asm 0, -tt 75,75,75,75 -wd 0).
I'm worried because i used the command -ttli and -tstop to protect the rig, but that seems to affect only gpu0 and gpu1, already see gpu2 and gpu3 get to 100 celsius....
Already tried miner 10.0,11.0 and 11.1
Any tips?

An update, i got a third 7990, and now, the program shows all fan speed and temps...go figure...

[tkredmond]

I use Flyploo Like it and have had no problems. Seems pretty accurate with hash rate and good payouts

Second that. Never had an issue with flypool

[ktu]

I use coinmine.pl - all good.

[sanevox]

When 11.2 man?

Never!
It will be v12 

[ffthomas]

I can recommend coinotron for Zcash, even though hashrate is smaller.  PPLNS is decent, and they have PPS at 3%.  worker notifications, etc.  I've never really had connection problems there (like dwarf, or sometimes coinmine).  Plus its not flypool, so there's that

@fr4nkthetank - I'm curious what's your problem/issue with flypool?

[thiagobangu]

My rig show only GPU0 and GPU1 temp and fan, i have 2x 7990, under win 10, already tried all from catalyst 15.12 to 17.1(used ddu), tried all sort of config command(-asm 0, -tt 75,75,75,75 -wd 0).
I'm worried because i used the command -ttli and -tstop to protect the rig, but that seems to affect only gpu0 and gpu1, already see gpu2 and gpu3 get to 100 celsius....
Already tried miner 10.0,11.0 and 11.1
Any tips?

An update, i got a third 7990, and now, the program shows all fan speed and temps...go figure...

Hi friends, I'm looking to buy Rx 470, could anyone recommend the correct model?

[theotoukou]

10:48:27:274   a00   GPU 0 temp = 70, old fan speed = 52, new fan speed = 37

10:48:27:290   a00   GPU 6 temp = 68, old fan speed = 48, new fan speed = 33

10:48:27:306   a00   GPU 12 temp = 69, old fan speed = 54, new fan speed = 39

10:48:27:321   a00   GPU 18 temp = 70, old fan speed = 72, new fan speed = 65

10:48:27:321   a00   GPU 24 temp = 66, old fan speed = 40, new fan speed = 25

10:48:30:118   1328   OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst
10:48:30:134   1328   OC v7, Reset control for GPU 6, close miner right now if you want to use default control from Catalyst
10:48:30:150   1328   OC v7, Reset control for GPU 12, close miner right now if you want to use default control from Catalyst
10:48:30:165   1328   OC v7, Reset control for GPU 18, close miner right now if you want to use default control from Catalyst
10:48:30:165   1328   OC v7, Reset control for GPU 24, close miner right now if you want to use default control from Catalyst




Any solution? (Rig 5xRX480 8gb, Windows 10, Catalyst 16.12.2)

[Igor M]

When we can expect v12? I`m tired og glitches with 11.1 on win10

[jelin1984]

we need new version

asaaapppppppppppp

[fr4nkthetank]

I can recommend coinotron for Zcash, even though hashrate is smaller.  PPLNS is decent, and they have PPS at 3%.  worker notifications, etc.  I've never really had connection problems there (like dwarf, or sometimes coinmine).  Plus its not flypool, so there's that

@fr4nkthetank - I'm curious what's your problem/issue with flypool?

Oh it was just a joke   Flypool is fine, really.  Some time back I compared coinmine/flypool/coinotron/dwarf and found better results at coinmine and coinotron, but then coinmine had connectivity problems.  For a week or two they had really bad luck some time back, but that happens to every pool.

[pilotbtc1]

The graphics card can be overclocked to PowerColor r9 390 on the Windows? 

[semajjames]

Anyone know what this means ,,,

12:55:51:236   928   socket was closed remotely
12:55:51:236   928   ZEC: Connection lost, retry in 10 sec...

I know what connection lost means but what does socket was closed remotely mean ?

[sanas]

I'm still working on new version. I rewrite everything again and it takes a bit more time than I expected. However, most of work is completed, I plan to have new version finished this week.

Well, I hope will be a significant gain for RX 4xx series

[CODISMYLIFE]

hi guys
company that i bought my broken gpu told me you must choose between this card instead your broken gpu
r9 nano 4gb  r9 fury dc 4gb  r9 fury x 4gb
as your opinion which is better for zcash mining with claymore?

[fr4nkthetank]

Well...I would choose the Nano honestly, for the low power usage and there are very nice mods publicly available for it.  Fury is nice too, but if you can choose a fury x...which is the same thing basically but more CU's.  Keep in mind a nano is really small form factor compared to a fury, so its much more convenient too.  Pretty sure nano has higher resale value too.

[br2459]

Well...I would choose the Nano honestly, for the low power usage and there are very nice mods publicly available for it.  Fury is nice too, but if you can choose a fury x...which is the same thing basically but more CU's.  Keep in mind a nano is really small form factor compared to a fury, so its much more convenient too.  Pretty sure nano has higher resale value too.

What is the hashrate on the Nano's anyways? Curious since I am trying to upgrade my rig to more power efficient cards.

[fr4nkthetank]

well you can check out this thread right here :  https://bitcointalk.org/index.php?topic=1424132.0   But they can get pretty power efficient, I dont have one myself, but I think its on par with or just a little higher than the efficiency ratio of a rx470, which are really good for efficiency.  If you are looking for watts to hash, then for the price you can buy the GPU, I'd say go with the new generation.