Yatsida
Newbie
Offline
Activity: 67
Merit: 0
|
|
July 06, 2017, 01:44:22 PM |
|
I think the most stable version is version 12.5 I think.
I agree with that. I have tried many versions.
|
|
|
|
wise_turtle
Newbie
Offline
Activity: 48
Merit: 0
|
|
July 07, 2017, 09:25:58 PM |
|
ok so i just downloaded claymore what do i wrote in my bat file cause i have no idea i want to mine some hush i read articles but i don't understand sh*t
SAMPLE USAGE flypool SSL/TLS connection: ZecMiner64.exe -zpool ssl://eu1-zcash.flypool.org:3443 -zwal t1RjQjDbPQ9Syp97DHFyzvgZhcjgLTMwhaq.YourWorkerName -zpsw x suprnova SSL/TLS connection: ZecMiner64.exe -zpool ssl://zec.suprnova.cc:2242 -zwal YourLogin.YourWorkerName -zpsw YourWorkerPassword miningpoolhub SSL/TLS connection (this pool detects encryption automatically so it uses same port as for unencrypted connection): ZecMiner64.exe -zpool ssl://us-east.equihash-hub.miningpoolhub.com:20570 -zwal YourLogin.YourWorkerName -zpsw YourWorkerPassword coinmine SSL/TLS connection: ZecMiner64.exe -zpool ssl://zec.coinmine.pl:7017 -zwal YourLogin.YourWorkerName -zpsw YourWorkerPassword flypool (unencrypted connection): ZecMiner64.exe -zpool eu1-zcash.flypool.org:3333 -zwal t1RjQjDbPQ9Syp97DHFyzvgZhcjgLTMwhaq.YourWorkerName -zpsw x nanopool (unencrypted connection): ZecMiner64.exe -zpool zec-eu1.nanopool.org:6666 -zwal t1RjQjDbPQ9Syp97DHFyzvgZhcjgLTMwhaq.YourWorkerName -zpsw x miningpoolhub (unencrypted connection) ZecMiner64.exe -zpool us-east.equihash-hub.miningpoolhub.com:20570 -zwal YourLogin.YourWorkerName -zpsw YourWorkerPassword nicehash (unencrypted connection): ZecMiner64.exe -zpool equihash.usa.nicehash.com:3357 -zwal 1LmMNkiEvjapn5PRY8A9wypcWJveRrRGWr -zpsw x suprnova (unencrypted connection): ZecMiner64.exe -zpool zec.suprnova.cc:2142 -zwal YourLogin.YourWorkerName -zpsw YourWorkerPassword coinmine (unencrypted connection): ZecMiner64.exe -zpool zec.coinmine.pl:7007 -zwal YourLogin.YourWorkerName -zpsw YourWorkerPassword ty sir you are a hero
|
|
|
|
AltcoinScamfinder
|
|
July 07, 2017, 10:17:42 PM |
|
Claymore. When can we see Vega Frontier Edition support in Calymore? Apparently they are currently not compatible (cant build OpenCL application).
|
FOR RENT.
|
|
|
zhelezo
|
|
July 08, 2017, 04:39:56 AM |
|
i got 83-84 h/s on my hd7770 with overclocking x2 = 166h/s
What pool?
|
|
|
|
Kwiksave
Member
Offline
Activity: 102
Merit: 10
|
|
July 08, 2017, 09:08:40 AM |
|
Claymore. When can we see Vega Frontier Edition support in Calymore? Apparently they are currently not compatible (cant build OpenCL application).
He said he would do it in a few weeks.
|
|
|
|
bolvan
Member
Offline
Activity: 84
Merit: 10
|
|
July 08, 2017, 02:56:23 PM |
|
I have 2x280X cards. Miner shows temp and fan speed only from GPU0 I'd like to see it from all cards. Possible ?
|
AQJxzVdC8Au8a3nKjbzk5k66sziAJ5Y5Cw
|
|
|
CitricAcid
Newbie
Offline
Activity: 60
Merit: 0
|
|
July 08, 2017, 09:31:12 PM |
|
Claymore. When can we see Vega Frontier Edition support in Calymore? Apparently they are currently not compatible (cant build OpenCL application).
I can confirm this as well that it is not compatible https://forum.z.cash/t/amd-vega-frontier/18788/8
|
|
|
|
BitJunkie556
|
|
July 09, 2017, 03:35:17 AM |
|
I have 2x280X cards. Miner shows temp and fan speed only from GPU0 I'd like to see it from all cards. Possible ?
That's kind of strange. I would say just run MSI Afterburner and keep the monitor window thing open. Works well enough to glance at your system's performance, temps etc. Been using MSI Afterburner for years now.
|
|
|
|
bolvan
Member
Offline
Activity: 84
Merit: 10
|
|
July 09, 2017, 06:10:24 AM |
|
That's kind of strange. I would say just run MSI Afterburner and keep the monitor window thing open. Works well enough to glance at your system's performance, temps etc. Been using MSI Afterburner for years now.
MSI afterburner requires windows and requires local desktop access. It cant run in RDP session. I like using http feature of the miner. Dont need any remote desktop access. May be crossfire is the reason, ill check
|
AQJxzVdC8Au8a3nKjbzk5k66sziAJ5Y5Cw
|
|
|
Batelk
|
|
July 09, 2017, 07:12:48 AM |
|
Claymore. When can we see Vega Frontier Edition support in Calymore? Apparently they are currently not compatible (cant build OpenCL application).
I can confirm this as well that it is not compatible https://forum.z.cash/t/amd-vega-frontier/18788/8Not many people own the Frontier version. So when the RX version comes out, Claymore should have enough time to do the work.
|
|
|
|
Belix
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 09, 2017, 07:24:45 AM Last edit: July 09, 2017, 07:59:17 AM by Belix |
|
Running a single R9 Fury X on a windows box, using 15.12 drivers, which runs Claymore's Duel Eth and DCR miner without issue. But I cannot get the claymore Zec miner to work.
Card is not overclocked at all.
It runs but shows a hash speed of zero:
16:48:47:056 1a1c ZEC: 07/07/17-16:48:47 - New job from zec.suprnova.cc:2242 16:48:47:071 1a1c target: 0x003c3c3c (diff: 1088H) 16:48:47:081 1a1c ZEC - Total Speed: 0.000 H/s, Total Shares: 0, Rejected: 0, Time: 00:00 16:48:47:096 1a1c ZEC: GPU0 0.000 H/s
and then after a minute or two 16:49:59:356 1ae8 watchdog - thread 0, hb time 72313 16:49:59:371 1ae8 WATCHDOG: GPU 0 hangs in OpenCL call, exit 16:49:59:386 1ae8 watchdog - thread 1, hb time 72484 16:49:59:396 1ae8 WATCHDOG: GPU 0 hangs in OpenCL call, exit 16:49:59:406 1ae8 watchdog - thread 2, hb time 72578 16:49:59:421 1ae8 WATCHDOG: GPU 0 hangs in OpenCL call, exit 16:49:59:431 1ae8 watchdog - thread 3, hb time 72391 16:49:59:446 1ae8 WATCHDOG: GPU 0 hangs in OpenCL call, exit 16:50:00:976 1ae8 Restarting OK, exit...
Anyone had a similar experience?
|
|
|
|
Zyxi
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 09, 2017, 10:12:28 AM |
|
I'm new to mining but am having a tiny issue so wanted to see if I was doing something wrong.
I have 3 GPU's in my system and all of them are stock RX 470's. While running it shows GPU 0, 1, and 2 all working fine. The odd thing is when it shows the temperatures and fan speeds it will only show this for GPU 0 and GPU 1. I have tried using -gmap 012 and also -gmap 210 and it still only shows 2 of the GPU's. See below:
ZEC: 07/09/17-03:04:40 - SHARE FOUND - (GPU 2) ZEC: Share accepted (156 ms)! ZEC: 07/09/17-03:04:41 - SHARE FOUND - (GPU 2) ZEC: Share accepted (156 ms)! ZEC: 07/09/17-03:04:45 - SHARE FOUND - (GPU 1) ZEC: Share accepted (156 ms)! ZEC: 07/09/17-03:04:51 - SHARE FOUND - (GPU 1) ZEC: Share accepted (156 ms)! Pool sets new share target: 0x000e3b07 (diff: 4605H) ZEC: 07/09/17-03:04:56 - New job from zec.suprnova.cc:2242 ZEC - Total Speed: 822.119 H/s, Total Shares: 36, Rejected: 0, Time: 00:04 ZEC: GPU0 279.209 H/s, GPU1 272.246 H/s, GPU2 270.664 H/s GPU0 t=71C fan=46%, GPU1 t=69C fan=27% ZEC: 07/09/17-03:05:12 - SHARE FOUND - (GPU 0)
From reading the documentation this should be showing all three GPU temps and fan speeds, so I wanted to ask what I am doing wrong that is preventing this from happening.
Thanks in advance for the help!
|
|
|
|
bolvan
Member
Offline
Activity: 84
Merit: 10
|
|
July 09, 2017, 12:33:23 PM |
|
May be crossfire is the reason, ill check
Yes, it was crossfire. With crossfire enabled miner show only temp from GPU0
|
AQJxzVdC8Au8a3nKjbzk5k66sziAJ5Y5Cw
|
|
|
bolvan
Member
Offline
Activity: 84
Merit: 10
|
|
July 09, 2017, 12:36:37 PM |
|
I have 3 GPU's in my system and all of them are stock RX 470's. While running it shows GPU 0, 1, and 2 all working fine. The odd thing is when it shows the temperatures and fan speeds it will only show this for GPU 0 and GPU 1. I have tried using -gmap 012 and also -gmap 210 and it still only shows 2 of the GPU's. See below:
Probably the same is applicable to your case
|
AQJxzVdC8Au8a3nKjbzk5k66sziAJ5Y5Cw
|
|
|
nano1014
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 11, 2017, 01:12:12 AM |
|
Hello, i have a problem. "Miner thread hangs, need to restart Miner" I keep getting this error after about a hour of mining, not sure why I keep getting it. The miner itself freezes at a certain time period and only hitting a keyboard button will bring up the error and restart the miner. http://oi66.tinypic.com/sol5j6.jpg
|
|
|
|
Blisk
|
|
July 11, 2017, 07:48:07 AM |
|
I still get error because of this library libssl.so.1.0.0 this lib is security risk, why it is used in Claymores?
|
|
|
|
Sylv88
Jr. Member
Offline
Activity: 40
Merit: 1
|
|
July 11, 2017, 09:30:01 AM |
|
Hi everyone, I'm having a problem with zcash mining lately, everthing worked fine for weeks, but recently every time In try mining zcash my miner crashes the hard way.. the entire miner freezes up after only 10-15minutes of mining, nothing can Bring it back to life except a hard reset. Ethereum mining works fine, zencash mining works fine but Zcash always crashes... Often it happens right after difficulty retarget. And Sometimes (not always) there is An error message "gpu 1 returned invalid data"..
Anyway I'm Running 5x 4gb rx 480, using a 4gb ram system.. the problem only occurs on zcash mining and happens on both windows 10 and Ubuntu...
If anyone could help me out that'd be great!
|
|
|
|
Old_Timer
Member
Offline
Activity: 131
Merit: 13
In the fray since 2013.
|
|
July 11, 2017, 03:38:49 PM |
|
The message "GPU #x returned wrong data" is mostly due to bad ram overclock or very high core clock?
|
|
|
|
Sylv88
Jr. Member
Offline
Activity: 40
Merit: 1
|
|
July 11, 2017, 03:45:27 PM |
|
I don't overclock, my settings are 1200 core & 1500 mem.. I think it's even a bit below stock settings...
I just find it weird that all other coins mine without problems.. but Zec always crashes.. Zen for example is equihash aswell and that doesn't crash.
|
|
|
|
Rastanan
|
|
July 12, 2017, 08:48:08 AM |
|
The message "GPU #x returned wrong data" is mostly due to bad ram overclock or very high core clock?
Yes. Just reduce the frequency.
|
|
|
|
|