Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[Zenixin]

Claymore could you add GPU number when got this error "Got 511 incorrect temperature. Ignore". I dont know which GPU made this error so it's hard to solve the problem.

By the way could you arrange GPU number position like new Ethereum miner?

I think he will change in the next release.

[fr4nkthetank]

Just buy a Gold EVGA PSU, warranty 5 years or more.  Run it 90% its less efficient though - you are losing maybe 5% efficiency - but it won't explode.  I have a PSU with 10 year warranty, another 7 years, most are 5...So if they pop well, that sucks because of downtime, but I get a replacement.  Only buy high quality PSU.  check johny guru.  even evga has PSU's I wouldnt buy.

[vatusasid]

Just buy a Gold EVGA PSU, warranty 5 years or more.  Run it 90% its less efficient though - you are losing maybe 5% efficiency - but it won't explode.  I have a PSU with 10 year warranty, another 7 years, most are 5...So if they pop well, that sucks because of downtime, but I get a replacement.  Only buy high quality PSU.  check johny guru.  even evga has PSU's I wouldnt buy.

That is right. I also just use Platinum PSU now.

[jackbox]

Just buy a Gold EVGA PSU, warranty 5 years or more.  Run it 90% its less efficient though - you are losing maybe 5% efficiency - but it won't explode.  I have a PSU with 10 year warranty, another 7 years, most are 5...So if they pop well, that sucks because of downtime, but I get a replacement.  Only buy high quality PSU.  check johny guru.  even evga has PSU's I wouldnt buy.

That is right. I also just use Platinum PSU now.

Corsair HX1000i (platinum) or RM1000i (gold). Good, strong PSUs that you can run up to full rated power and can run program to see power usage and efficiency.

[Bwtmn7]

Claymore then is there a way you could get the R9 Fiji working with 17.7.2 or the incoming driver instead 16.3.2?

[fq,frHUxP*joE]

There are rumors Vega will be 3x faster than Fiji when it comes to hashing power. True/false?

[toptek]

There are rumors Vega will be 3x faster than Fiji when it comes to hashing power. True/false?

guess we won't know for sure till week after next, I saw some place they should finally release on the 14th or 15th this month which is prefect for me, i can buy one then, ill have 450 $ from mining, to spend in about the time they release.

Here is one of the rumors http://www.guru3d.com/news-story/rumor-radeon-rx-vega-cards-look-to-be-insanely-good-crypto-currency-miners.html  I found a few on YouTube .

hope the pricing i saw some place else is true I'll get one of the 399.00 $ version with air cooling and water cool it later on and about two weeks later should have enough for one more, it all depends on the Price .

[anticlimax]

Claymore could you add GPU number when got this error "Got 511 incorrect temperature. Ignore". I dont know which GPU made this error so it's hard to solve the problem.

By the way could you arrange GPU number position like new Ethereum miner?

Im having issues with this error also, though still not sure if it's hardware or software causing it. Keeps crashing my fury rig after miner/afterburner reports insane temps on one card, but it doesn't seem to be consistently the same gpu.
Might be the open box mobo or lack of sleep, but I haven't had this much trouble in a while.
Msi afterburner reports one gpu reaching 300c-500c right before locking up. 
16.3.2 the only drivers that work for Fiji?

[amuleth]

Can you do -nofee option without any disadvantage on the new version?

[Claymore]

Claymore then is there a way you could get the R9 Fiji working with 17.7.2 or the incoming driver instead 16.3.2?

Yes I will do it, but not in upcoming version because I will release it in a few hours, its main feature is ASM mode for Baffin (RX460/560) and Vega.

[Claymore]

v12.6:

- added Vega cards support (ASM mode).
- added ASM mode for RX460/560 cards (+20% speed).
- new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically.
  Therefore "-di detect" and "-gmap" options are not necessary and not supported anymore.
  WARNING: be careful if you use use separate overclock/temperature settings for every card, due to new sorting method GPUs can get different indexes!
- added fan/OC support for 17.7.2 (and higher) drivers.
- improved support for systems with more than 10 GPUs, check readme for "-di" option description for details.
- added pool selection in runtime ("e" key).
- a few minor improvements.

[Vivlore]

v12.6:

- added Vega cards support (ASM mode).
- added ASM mode for RX460/560 cards (+20% speed).
- new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically.
  Therefore "-di detect" and "-gmap" options are not necessary and not supported anymore.
  WARNING: be careful if you use use separate overclock/temperature settings for every card, due to new sorting method GPUs can get different indexes!
- added fan/OC support for 17.7.2 (and higher) drivers.
- improved support for systems with more than 10 GPUs, check readme for "-di" option description for details.
- added pool selection in runtime ("e" key).
- a few minor improvements.

Thanks for the efforts. So if we have old cards, there is no need to upgrade.

[YIz]

Does anyone have a clue on the hashrate with a Vega 64?

[farfui]

or any vega hashrate

[Supercomputing]

v12.6:

- added Vega cards support (ASM mode).
- added ASM mode for RX460/560 cards (+20% speed).
- new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically.
  Therefore "-di detect" and "-gmap" options are not necessary and not supported anymore.
  WARNING: be careful if you use use separate overclock/temperature settings for every card, due to new sorting method GPUs can get different indexes!
- added fan/OC support for 17.7.2 (and higher) drivers.
- improved support for systems with more than 10 GPUs, check readme for "-di" option description for details.
- added pool selection in runtime ("e" key).
- a few minor improvements.

AMD Radeon Vega Frontier Edition @ stock clocks:

AMD Cards available: 1
GPU #0: gfx900, 16192 MB available, 64 compute units
GPU #0 recognized as Vega
POOL version
GPU #0 algorithm ASM, intensity 6
Total cards: 1
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333 (unsecure)
ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333) (unsecure)
ZEC: Authorized
Pool sets new share target: 0x00083126 (diff: 8000H)
ZEC: 08/08/17-13:54:52 - New job from eu1-zcash.flypool.org:3333
ZEC - Total Speed: 311.773 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
ZEC: GPU0 311.773 H/s

[adaseb]

v12.6:

- added Vega cards support (ASM mode).
- added ASM mode for RX460/560 cards (+20% speed).
- new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically.
  Therefore "-di detect" and "-gmap" options are not necessary and not supported anymore.
  WARNING: be careful if you use use separate overclock/temperature settings for every card, due to new sorting method GPUs can get different indexes!
- added fan/OC support for 17.7.2 (and higher) drivers.
- improved support for systems with more than 10 GPUs, check readme for "-di" option description for details.
- added pool selection in runtime ("e" key).
- a few minor improvements.

AMD Radeon Vega Frontier Edition @ stock clocks:

AMD Cards available: 1
GPU #0: gfx900, 16192 MB available, 64 compute units
GPU #0 recognized as Vega
POOL version
GPU #0 algorithm ASM, intensity 6
Total cards: 1
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333 (unsecure)
ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333) (unsecure)
ZEC: Authorized
Pool sets new share target: 0x00083126 (diff: 8000H)
ZEC: 08/08/17-13:54:52 - New job from eu1-zcash.flypool.org:3333
ZEC - Total Speed: 311.773 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
ZEC: GPU0 311.773 H/s

That's bad. Worse than a 280X

[igorsantos]

RX460/560 cards (+20% speed)?Any tests?

[Claymore]

v12.6:

- added Vega cards support (ASM mode).
- added ASM mode for RX460/560 cards (+20% speed).
- new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically.
  Therefore "-di detect" and "-gmap" options are not necessary and not supported anymore.
  WARNING: be careful if you use use separate overclock/temperature settings for every card, due to new sorting method GPUs can get different indexes!
- added fan/OC support for 17.7.2 (and higher) drivers.
- improved support for systems with more than 10 GPUs, check readme for "-di" option description for details.
- added pool selection in runtime ("e" key).
- a few minor improvements.

AMD Radeon Vega Frontier Edition @ stock clocks:

AMD Cards available: 1
GPU #0: gfx900, 16192 MB available, 64 compute units
GPU #0 recognized as Vega
POOL version
GPU #0 algorithm ASM, intensity 6
Total cards: 1
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.60.113> port 3333 (unsecure)
ZEC: Stratum - Connected (eu1-zcash.flypool.org:3333) (unsecure)
ZEC: Authorized
Pool sets new share target: 0x00083126 (diff: 8000H)
ZEC: 08/08/17-13:54:52 - New job from eu1-zcash.flypool.org:3333
ZEC - Total Speed: 311.773 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
ZEC: GPU0 311.773 H/s

That's bad. Worse than a 280X

At startup the miner shows a notice that you must wait about a minute to get correct hashrate, but he ignored it, so he got some random number. I get 440H/s at stock clocks.

[Golku]

v12.6:


- new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically.

Thanks for this new feature I was waiting ages for this!

[Supercomputing]

At startup the miner shows a notice that you must wait about a minute to get correct hashrate, but he ignored it, so he got some random number. I get 440H/s at stock clocks.

Could I please have your launch configuration + OS + driver version?

After 11.5 minutes:
ZEC: 08/08/17-15:04:13 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (140 ms)!
ZEC: 08/08/17-15:04:23 - New job from eu1-zcash.flypool.org:3333
ZEC - Total Speed: 260.951 H/s, Total Shares: 25, Rejected: 1, Time: 00:11
ZEC: GPU0 260.951 H/s
ZEC: 08/08/17-15:04:29 - New job from eu1-zcash.flypool.org:3333
ZEC - Total Speed: 261.559 H/s, Total Shares: 25, Rejected: 1, Time: 00:11
ZEC: GPU0 261.559 H/s
ZEC: 08/08/17-15:04:48 - SHARE FOUND - (GPU 0)
ZEC: Share accepted (156 ms)!