skunk
|
|
August 05, 2014, 11:52:15 PM |
|
probably but lets know what "half decent" means first... Mine isn't ready to be released, and won't until I get it working on pool...
almost 2 mhs on a gtx660 oem with 1152 cores
|
|
|
|
cayars
|
|
August 05, 2014, 11:55:55 PM |
|
probably but lets know what "half decent" means first... Mine isn't ready to be released, and won't until I get it working on pool...
almost 2 mhs on a gtx660 oem with 1152 cores Finally got the hashrate more consistent - slightly over 2MH/s per 750Ti @ stock. Is that yours on the new release?
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
August 05, 2014, 11:56:06 PM |
|
Either of you two guys planning to release yours?
This one was built on Cuda and not cc miner.
I would say it an sgcudaminer... it compiles with mingw32 (or I didn't look much into details)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
mmmaybe
|
|
August 06, 2014, 12:04:48 AM |
|
probably but lets know what "half decent" means first... Mine isn't ready to be released, and won't until I get it working on pool...
almost 2 mhs on a gtx660 oem with 1152 cores Finally got the hashrate more consistent - slightly over 2MH/s per 750Ti @ stock. How fast was the original?
|
|
|
|
|
mmmaybe
|
|
August 06, 2014, 12:22:55 AM |
|
probably but lets know what "half decent" means first... Mine isn't ready to be released, and won't until I get it working on pool...
almost 2 mhs on a gtx660 oem with 1152 cores Finally got the hashrate more consistent - slightly over 2MH/s per 750Ti @ stock. How fast was the original? Original was ~1.5MH/s, I think. Still lots to do, though. Ok, thanks. Good luck with optimizing **edit: wow, prize really dropping fast. No buyers over 0.00002226 now!
|
|
|
|
mmmaybe
|
|
August 06, 2014, 12:48:55 AM |
|
Thats awesome
|
|
|
|
sparks2013
Newbie
Offline
Activity: 55
Merit: 0
|
|
August 06, 2014, 02:05:18 AM |
|
Almost had everything compiled for CudaMiner on windows when I hit a wall during this step LIBCURL="-lcurldll" ./configure CFLAGS="-O3" It errors out with the following: checking for __gmpz_init in -lgmp... no configure: error: GNU MP not found, see https://gmplib.org/I know that I am missing gmplib, just not sure where or how to install it via MinGW/MSYS
|
|
|
|
ilovecudacompute
Member
Offline
Activity: 112
Merit: 10
|
|
August 06, 2014, 02:21:43 AM |
|
Almost had everything compiled for CudaMiner on windows when I hit a wall during this step LIBCURL="-lcurldll" ./configure CFLAGS="-O3" It errors out with the following: checking for __gmpz_init in -lgmp... no configure: error: GNU MP not found, see https://gmplib.org/I know that I am missing gmplib, just not sure where or how to install it via MinGW/MSYS The dev of cryptonite mentioned in this irc channel about that question ( i asked in the #ccminer irc channel) " you will need libgmp. build from source maybe"
|
|
|
|
sparks2013
Newbie
Offline
Activity: 55
Merit: 0
|
|
August 06, 2014, 02:23:18 AM |
|
Almost had everything compiled for CudaMiner on windows when I hit a wall during this step LIBCURL="-lcurldll" ./configure CFLAGS="-O3" It errors out with the following: checking for __gmpz_init in -lgmp... no configure: error: GNU MP not found, see https://gmplib.org/I know that I am missing gmplib, just not sure where or how to install it via MinGW/MSYS The dev of cryptonight mentioned in this irc channel about that question ( i asked in the #ccminer irc channel) " you will need libgmp. build from source maybe" Thanks for the tip, I managed to install libgmp in MinGW, but now I am stuck on the close to the last step being the make. I'm getting an error listed: c:\mingw\include\ws2tcpip.h:38:2: error: #error "ws2tcpip.h is not compatible with winsock.h. Include winsock2.h instead." #error "ws2tcpip.h is not compatible with winsock.h. Include winsock2.h instead." ^ In file included from c:/mingw64/include/curl/curlbuild.h:124:0, from c:/mingw64/include/curl/curl.h:34, from cpu-miner.c:37: c:\mingw\include\ws2tcpip.h:147:8: error: redefinition of 'struct ip_mreq' struct ip_mreq { ^ In file included from c:\mingw\include\windows.h:93:0, from cpu-miner.c:23: c:\mingw\include\winsock.h:315:8: note: originally defined here struct ip_mreq { ^
|
|
|
|
ilovecudacompute
Member
Offline
Activity: 112
Merit: 10
|
|
August 06, 2014, 02:31:44 AM |
|
Almost had everything compiled for CudaMiner on windows when I hit a wall during this step LIBCURL="-lcurldll" ./configure CFLAGS="-O3" It errors out with the following: checking for __gmpz_init in -lgmp... no configure: error: GNU MP not found, see https://gmplib.org/I know that I am missing gmplib, just not sure where or how to install it via MinGW/MSYS The dev of cryptonight mentioned in this irc channel about that question ( i asked in the #ccminer irc channel) " you will need libgmp. build from source maybe" Thanks for the tip, I managed to install libgmp in MinGW, but now I am stuck on the close to the last step being the make. I'm getting an error listed: c:\mingw\include\ws2tcpip.h:38:2: error: #error "ws2tcpip.h is not compatible with winsock.h. Include winsock2.h instead." #error "ws2tcpip.h is not compatible with winsock.h. Include winsock2.h instead." ^ In file included from c:/mingw64/include/curl/curlbuild.h:124:0, from c:/mingw64/include/curl/curl.h:34, from cpu-miner.c:37: c:\mingw\include\ws2tcpip.h:147:8: error: redefinition of 'struct ip_mreq' struct ip_mreq { ^ In file included from c:\mingw\include\windows.h:93:0, from cpu-miner.c:23: c:\mingw\include\winsock.h:315:8: note: originally defined here struct ip_mreq { ^ The advise from the dev in irc was as follows : "i think change cpu-miner.c so #include <winsock2.h> #include <windows.h>
|
|
|
|
sparks2013
Newbie
Offline
Activity: 55
Merit: 0
|
|
August 06, 2014, 03:16:04 AM |
|
Almost had everything compiled for CudaMiner on windows when I hit a wall during this step LIBCURL="-lcurldll" ./configure CFLAGS="-O3" It errors out with the following: checking for __gmpz_init in -lgmp... no configure: error: GNU MP not found, see https://gmplib.org/I know that I am missing gmplib, just not sure where or how to install it via MinGW/MSYS The dev of cryptonight mentioned in this irc channel about that question ( i asked in the #ccminer irc channel) " you will need libgmp. build from source maybe" Thanks for the tip, I managed to install libgmp in MinGW, but now I am stuck on the close to the last step being the make. I'm getting an error listed: c:\mingw\include\ws2tcpip.h:38:2: error: #error "ws2tcpip.h is not compatible with winsock.h. Include winsock2.h instead." #error "ws2tcpip.h is not compatible with winsock.h. Include winsock2.h instead." ^ In file included from c:/mingw64/include/curl/curlbuild.h:124:0, from c:/mingw64/include/curl/curl.h:34, from cpu-miner.c:37: c:\mingw\include\ws2tcpip.h:147:8: error: redefinition of 'struct ip_mreq' struct ip_mreq { ^ In file included from c:\mingw\include\windows.h:93:0, from cpu-miner.c:23: c:\mingw\include\winsock.h:315:8: note: originally defined here struct ip_mreq { ^ The advise from the dev in irc was as follows : "i think change cpu-miner.c so #include <winsock2.h> #include <windows.h> That didn't really help.. I've been at this now for over 3 hours and my head is starting to hurt lol. I think this can be resolved by installing an earlier version of MinGW, the only issue is that I cannot find a safe and working download link anywhere..
|
|
|
|
sparks2013
Newbie
Offline
Activity: 55
Merit: 0
|
|
August 06, 2014, 03:22:39 AM |
|
Almost had everything compiled for CudaMiner on windows when I hit a wall during this step LIBCURL="-lcurldll" ./configure CFLAGS="-O3" It errors out with the following: checking for __gmpz_init in -lgmp... no configure: error: GNU MP not found, see https://gmplib.org/I know that I am missing gmplib, just not sure where or how to install it via MinGW/MSYS The dev of cryptonight mentioned in this irc channel about that question ( i asked in the #ccminer irc channel) " you will need libgmp. build from source maybe" Thanks for the tip, I managed to install libgmp in MinGW, but now I am stuck on the close to the last step being the make. I'm getting an error listed: c:\mingw\include\ws2tcpip.h:38:2: error: #error "ws2tcpip.h is not compatible with winsock.h. Include winsock2.h instead." #error "ws2tcpip.h is not compatible with winsock.h. Include winsock2.h instead." ^ In file included from c:/mingw64/include/curl/curlbuild.h:124:0, from c:/mingw64/include/curl/curl.h:34, from cpu-miner.c:37: c:\mingw\include\ws2tcpip.h:147:8: error: redefinition of 'struct ip_mreq' struct ip_mreq { ^ In file included from c:\mingw\include\windows.h:93:0, from cpu-miner.c:23: c:\mingw\include\winsock.h:315:8: note: originally defined here struct ip_mreq { ^ The advise from the dev in irc was as follows : "i think change cpu-miner.c so #include <winsock2.h> #include <windows.h> That didn't really help.. I've been at this now for over 3 hours and my head is starting to hurt lol. I think this can be resolved by installing an earlier version of MinGW, the only issue is that I cannot find a safe and working download link anywhere.. When I used Windows, I would build a cross-toolchain, then use that to build a Win64 native toolchain. Hmmm, thanks for the info.. However, it doesn't make a whole lot of sense to me . I am somewhat of a newb here.. I'm following some legacy guides that I've found such as http://pastebin.com/p2cRgHxd
|
|
|
|
sparks2013
Newbie
Offline
Activity: 55
Merit: 0
|
|
August 06, 2014, 03:28:06 AM |
|
Almost had everything compiled for CudaMiner on windows when I hit a wall during this step LIBCURL="-lcurldll" ./configure CFLAGS="-O3" It errors out with the following: checking for __gmpz_init in -lgmp... no configure: error: GNU MP not found, see https://gmplib.org/I know that I am missing gmplib, just not sure where or how to install it via MinGW/MSYS The dev of cryptonight mentioned in this irc channel about that question ( i asked in the #ccminer irc channel) " you will need libgmp. build from source maybe" Thanks for the tip, I managed to install libgmp in MinGW, but now I am stuck on the close to the last step being the make. I'm getting an error listed: c:\mingw\include\ws2tcpip.h:38:2: error: #error "ws2tcpip.h is not compatible with winsock.h. Include winsock2.h instead." #error "ws2tcpip.h is not compatible with winsock.h. Include winsock2.h instead." ^ In file included from c:/mingw64/include/curl/curlbuild.h:124:0, from c:/mingw64/include/curl/curl.h:34, from cpu-miner.c:37: c:\mingw\include\ws2tcpip.h:147:8: error: redefinition of 'struct ip_mreq' struct ip_mreq { ^ In file included from c:\mingw\include\windows.h:93:0, from cpu-miner.c:23: c:\mingw\include\winsock.h:315:8: note: originally defined here struct ip_mreq { ^ The advise from the dev in irc was as follows : "i think change cpu-miner.c so #include <winsock2.h> #include <windows.h> That didn't really help.. I've been at this now for over 3 hours and my head is starting to hurt lol. I think this can be resolved by installing an earlier version of MinGW, the only issue is that I cannot find a safe and working download link anywhere.. When I used Windows, I would build a cross-toolchain, then use that to build a Win64 native toolchain. Hmmm, thanks for the info.. However, it doesn't make a whole lot of sense to me . I am somewhat of a newb here.. I'm following some legacy guides that I've found such as http://pastebin.com/p2cRgHxdOh, maybe that's not for you, then. I prefer not to use MSYS or the like at all, and instead build what I need from source from a linux machine. Hehe yeah, understandable.. I actually have an ubuntu server up and running, however.. It's not really that accessible to pop in one of my 750 Ti cards. If it was, I would have likely had this compiled awhile ago hah..
|
|
|
|
zelante
|
|
August 06, 2014, 05:17:42 AM Last edit: August 06, 2014, 09:46:18 AM by zelante |
|
Wrapper for cuda miner by Zelante v2.0.4 (Aug 6th 2014) - "Split Screen" [add] | sum of all current and average gpu hashrates | [add] | log file output. now only error, start/end strings. | [add] | on high OC on cryptonight gpu may show abnormal hashrate (>36000 H/s). if so, splitscreen will exit. | [fix] | average count algorithm | [chg] | type of start miner was changed. exit only by F10, in that case both process (splitscreen and miner) will be killed correctly. if you kill splitscreen process, miner process will continue working! if you need kill both process: first kill splitscreen and after that miner process. | http://www.cudamining.cc/url/releases/member/7
|
|
|
|
th00ber
|
|
August 06, 2014, 09:50:03 AM |
|
Got some problem on linux to compile. I just compile/install th gmp library ( https://gmplib.org/manual/Installing-GMP.html) Now, the ./configure is working for the cudaminer. But the make is failing because of : make[2]: Entering directory `/opt/miners/cudaminer-cryptonite' nvcc -Xptxas "-abi=no -v" -arch=compute_35 --ptxas-options=-v -O2 -o trashminer.o -c trashminer.cu In file included from trashminer.cu:58:0: uint256.h:16:19: fatal error: gmpxx.h: No such file or directory #include <gmpxx.h> I just try to copy the gmp .h file in the root cudaminer directory and restart a make ... but it's the same. I'm not really good with compilation, Any idea ?
|
|
|
|
dboylc
Full Member
Offline
Activity: 153
Merit: 100
mine for future~
|
|
August 06, 2014, 09:53:06 AM |
|
Got some problem on linux to compile. I just compile/install th gmp library ( https://gmplib.org/manual/Installing-GMP.html) Now, the ./configure is working for the cudaminer. But the make is failing because of : make[2]: Entering directory `/opt/miners/cudaminer-cryptonite' nvcc -Xptxas "-abi=no -v" -arch=compute_35 --ptxas-options=-v -O2 -o trashminer.o -c trashminer.cu In file included from trashminer.cu:58:0: uint256.h:16:19: fatal error: gmpxx.h: No such file or directory #include <gmpxx.h> I just try to copy the gmp .h file in the root cudaminer directory and restart a make ... but it's the same. I'm not really good with compilation, Any idea ? same question as yours. and compile from cygwin also. seems it cant be done under gcc
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3164
Merit: 1003
|
|
August 06, 2014, 10:32:30 AM |
|
that's my address for 1, well the donation address for cudamining.cc but your right, is it stuck. or the user...
Just saying lol, I almost got a donation you did, i mined straight to your wallet for 8 hrs a week ago or so and that donation goes to bigjme. ok 40 weeks to go on btc wallet
|
|
|
|
polanskiman
|
|
August 06, 2014, 10:51:29 AM |
|
Wrapper for cuda miner by Zelante v2.0.4 (Aug 6th 2014) - "Split Screen" [add] | sum of all current and average gpu hashrates | [add] | log file output. now only error, start/end strings. | [add] | on high OC on cryptonight gpu may show abnormal hashrate (>36000 H/s). if so, splitscreen will exit. | [fix] | average count algorithm | [chg] | type of start miner was changed. exit only by F10, in that case both process (splitscreen and miner) will be killed correctly. if you kill splitscreen process, miner process will continue working! if you need kill both process: first kill splitscreen and after that miner process. | http://www.cudamining.cc/url/releases/member/7Have the errors showing in my previous screenshot been resolved?
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
August 06, 2014, 11:35:08 AM |
|
anybody know what "high-hash" means on pool (this is what I currently get from 1gh) (the share is below target but still rejected with this "high-hash" message)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
|