airwalker2662
Member
Offline
Activity: 116
Merit: 10
|
|
May 05, 2017, 04:49:33 PM |
|
I'm setting up a rig with 6 gtx 1070s. Is a 1300w psu good enough to run it stably?
I run 6 comfortably on a EVGA P2 1200 power supply I'm setting up a rig with 6 gtx 1070s. Is a 1300w psu good enough to run it stably?
Depends whether you aim for maximizing hashrate or going for optimum H/Watt. If hashrate is your aim then go for it. If power-saving with optimum H/W is your aim, you will lower power limit to 120W and raise core/memory clocks. 1300W PSU is definitely overkill in that scenario. Thanks to both of you. That puts my mind at ease. I think I'll just go for maximum hash rate since I have 1300w. And just to clarify I'm running the motherboard/hdd etc off of the same psu. The power draw from those parts is also small so I assume that 1300w is sufficient for everything. There is no need to go with such a high wattage power supply for a new rig (assuming new cards). I run rigs with 6 x 1070's @ 100% TDP on an EVGA 1000 watt power supply with no issues. I do have mine connected to 240v for a bit better efficiency but it works fine on 120 as well. Every new card that comes out from now on will likely draw less power than its predecessor even with the big guns. Nvidia's Volta is due early 2018 now, and AMD well who cares but they are trying... Also, you get the best efficiency when using 85-92% of the available watts. A rig that draws 900W on a 1300w supply would be @ 70% and a waste of electricity and extra heat for the conversion.
|
|
|
|
anatolikostis
Legendary
Offline
Activity: 2026
Merit: 1005
|
|
May 05, 2017, 09:53:05 PM |
|
Also, you get the best efficiency when using 85-92% of the available watts. A rig that draws 900W on a 1300w supply would be @ 70% and a waste of electricity and extra heat for the conversion. U`re wrong: 50-75% of power
|
|
|
|
airwalker2662
Member
Offline
Activity: 116
Merit: 10
|
|
May 05, 2017, 10:56:54 PM |
|
You're extremely wrong. Do a bit of research before you throw out an opinion you have no clue about.
|
|
|
|
meeow
Member
Offline
Activity: 72
Merit: 11
|
|
May 05, 2017, 11:09:19 PM |
|
fast question anybody running 6 or 7 card rigs?
I was wondering if I should try to run a rig with a lot of cards.
Biostar Z170 Racing/6GPU/W10/G4560 1 1070, 5 1060 3GB, all OCd ~440 H/s on 1070@77% powlim ~285 H/s per 1060@75% powlim
|
|
|
|
nUm81
|
|
May 06, 2017, 02:44:18 AM |
|
You're extremely wrong. Do a bit of research before you throw out an opinion you have no clue about.
It is quite easy to locate the power curve for almost any new power supply. The best thing to do is figure out what your expected draw is, and compare that to the power curves. for example an EVGA SuperNova P2 1000 is most efficient around 400 - 500 watts So, if you were drawing 400w from the supply you could expect a draw at the plug around 420 - 425w (93% efficiency). If you were drawing 1000w from the same supply you could expect a draw around 1080w at the plug (92% efficiency).
|
|
|
|
airwalker2662
Member
Offline
Activity: 116
Merit: 10
|
|
May 06, 2017, 03:29:18 AM |
|
It is quite easy to locate and you are correct to figure out what your draw is to the appropriate the power supply. Many years ago before power factor correction became cheap and many advances in AC/DC mosfets, the sweet spot ( ideal conversion efficiency ) was around 60%. Anyone buying anything bronze+ rated now should buy according to their true needs. Keep in mind that most ratings such as you have posted are using 230V as a platform which in itself is a better ( flatter ) conversion. This is why I am using US 240V myself and getting the slightest little extra advantage A good read: http://www.electronicdesign.com/power/understand-efficiency-ratings-choosing-ac-dc-supply
|
|
|
|
nUm81
|
|
May 06, 2017, 04:10:27 AM |
|
Lucky I live in a country that the power standard is 240v. But on the downside, power is expensive so i always buy platinum+ power supplies and try and run them as close as i can to there maximum efficiency point.
|
|
|
|
Yesterdam
Newbie
Offline
Activity: 59
Merit: 0
|
|
May 06, 2017, 06:15:05 AM |
|
Also, you get the best efficiency when using 85-92% of the available watts. A rig that draws 900W on a 1300w supply would be @ 70% and a waste of electricity and extra heat for the conversion. U`re wrong: 50-75% of power This is right.
|
|
|
|
bulacha2
Newbie
Offline
Activity: 6
Merit: 0
|
|
May 06, 2017, 06:58:20 AM |
|
i'm having a problem here. I don't know if it's because i'm using the latest driver from Nvidia or if is because i'm using the latest version of windows 10, Windows 10 pro creators edition. it's showing this error: http://imgur.com/a/xkFbsi've tested all the miners you can think . the only one working right now is the eqm_V1.0.4cWin64 can someone please help me ? obs: Yes i've checked my .bat file they're ok with the pools , and yes i did open the ports in the modem and router and shutdown the windows firewall and any windows antivirus. and any antivirus at all. I really don't know what to do.
|
|
|
|
mdizzlebizzle
Newbie
Offline
Activity: 20
Merit: 0
|
|
May 06, 2017, 07:44:54 AM |
|
Hey! Can you help? Im using Zec miner 0.3.3b and MSI Afterburner. Settings to all 4x GPUs are 80, 100, 500. And each of them giving about 470 sol. But sometimes after restarting miner some of the GPU is giving 410 sol instead of 470 as always. So its become 470 410 470 470. What could it be and how to fix that? It can be fixed if i manually will make default settings in Afterburner and bring it back to 80, 100, 500 in this GPU. Or restarting PC is helping too. This is how it looks like https://i.imgur.com/BoBWORm.pngAre you, by chance, remoting into that desktop using something like Chrome Remote Desktop? I have the same problem he describes, but only when using Chrome Remote Desktop..why does that happen with this program?
|
|
|
|
nUm81
|
|
May 06, 2017, 10:45:49 AM |
|
i'm having a problem here. I don't know if it's because i'm using the latest driver from Nvidia or if is because i'm using the latest version of windows 10, Windows 10 pro creators edition. it's showing this error: i've tested all the miners you can think . the only one working right now is the eqm_V1.0.4cWin64 can someone please help me ? obs: Yes i've checked my .bat file they're ok with the pools , and yes i did open the ports in the modem and router and shutdown the windows firewall and any windows antivirus. and any antivirus at all. I really don't know what to do. Can you post your .bat file contents?
|
|
|
|
Diod-ionica
Newbie
Offline
Activity: 16
Merit: 0
|
|
May 06, 2017, 10:59:23 AM |
|
EWBF - Hi, when will you surprise the diggers waiting for the new version of the miner?
|
|
|
|
bulacha2
Newbie
Offline
Activity: 6
Merit: 0
|
|
May 06, 2017, 12:53:29 PM |
|
i'm having a problem here. I don't know if it's because i'm using the latest driver from Nvidia or if is because i'm using the latest version of windows 10, Windows 10 pro creators edition. it's showing this error: http://imgur.com/a/xkFbsi've tested all the miners you can think . the only one working right now is the eqm_V1.0.4cWin64 can someone please help me ? obs: Yes i've checked my .bat file they're ok with the pools , and yes i did open the ports in the modem and router and shutdown the windows firewall and any windows antivirus. and any antivirus at all. I really don't know what to do. Can you post your .bat file contents? Yeah sure. here: http://imgur.com/a/IpnQY
|
|
|
|
thesavoyard
|
|
May 06, 2017, 03:29:43 PM |
|
Anyone have the sols/s on the new 15g/s gtx 1080? I hope it's at least 550.
|
|
|
|
kalki
Newbie
Offline
Activity: 3
Merit: 0
|
|
May 06, 2017, 04:11:34 PM |
|
I'm new to mining Using GTX 1080Ti and I'm getting 750sol/s using EWBF's CUDA Zcash miner Version 0.3.3b. Comparing with Nicehash excavator which gets only 700sol/s My OC settings are: TDP: 118% Core Clock:+150 Memory Clock:+650 Temp: ~ 71C Aggressive fan curve
Note: I have no power cost that's why I'm trying to get maximum speed.
|
|
|
|
sublimus
|
|
May 06, 2017, 05:04:02 PM |
|
i'm having a problem here. I don't know if it's because i'm using the latest driver from Nvidia or if is because i'm using the latest version of windows 10, Windows 10 pro creators edition. it's showing this error: i've tested all the miners you can think . the only one working right now is the eqm_V1.0.4cWin64 can someone please help me ? obs: Yes i've checked my .bat file they're ok with the pools , and yes i did open the ports in the modem and router and shutdown the windows firewall and any windows antivirus. and any antivirus at all. I really don't know what to do. Can you post your .bat file contents? Yeah sure. here: hint: pass
|
|
|
|
bulacha2
Newbie
Offline
Activity: 6
Merit: 0
|
|
May 07, 2017, 12:50:17 AM |
|
i'm having a problem here. I don't know if it's because i'm using the latest driver from Nvidia or if is because i'm using the latest version of windows 10, Windows 10 pro creators edition. it's showing this error: http://imgur.com/a/xkFbsi've tested all the miners you can think . the only one working right now is the eqm_V1.0.4cWin64 can someone please help me ? obs: Yes i've checked my .bat file they're ok with the pools , and yes i did open the ports in the modem and router and shutdown the windows firewall and any windows antivirus. and any antivirus at all. I really don't know what to do. Can you post your .bat file contents? Yeah sure. here: http://imgur.com/a/IpnQYhint: pass what do you mean ?
|
|
|
|
nUm81
|
|
May 07, 2017, 02:05:03 AM |
|
i'm having a problem here. I don't know if it's because i'm using the latest driver from Nvidia or if is because i'm using the latest version of windows 10, Windows 10 pro creators edition. it's showing this error: i've tested all the miners you can think . the only one working right now is the eqm_V1.0.4cWin64 can someone please help me ? obs: Yes i've checked my .bat file they're ok with the pools , and yes i did open the ports in the modem and router and shutdown the windows firewall and any windows antivirus. and any antivirus at all. I really don't know what to do. Can you post your .bat file contents? Yeah sure. here: hint: pass what do you mean ? He means that a normal supernova password looks more like this miner.exe --server zec.suprnova.cc --user suprnova.1 --pass x --port 2142
|
|
|
|
Elder III
|
|
May 07, 2017, 02:07:59 AM |
|
I started using this miner for some ZCL on a GTX 1080 Ti tonight and the results are a bit better then using Nicehash's ZEC miner. I'm getting about 2% higher sols on average with the same clocks etc on the GPU.
|
|
|
|
MeistroUK
Member
Offline
Activity: 68
Merit: 10
|
|
May 07, 2017, 05:28:30 PM |
|
I started using this miner for some ZCL on a GTX 1080 Ti tonight and the results are a bit better then using Nicehash's ZEC miner. I'm getting about 2% higher sols on average with the same clocks etc on the GPU. I've started this a couple days ago when the difficulty of zec goes up cause it pretty much mins nothing when it does... how do you convert zcl to btc though - I use changelly to convert zec but they don't do the other one
|
|
|
|
|