zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 17, 2017, 09:23:47 PM |
|
There is a pretty obscure API in ADL for I2C, right?
Actually, I can just off-load hardware management to MSI AfterBurner and use its API to control voltages and clock frequencies, at least for the time being. I definitely need MMIO for GDS and memory timings, though...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 17, 2017, 09:37:13 PM |
|
There is a pretty obscure API in ADL for I2C, right?
Actually, I can just off-load hardware management to MSI AfterBurner and use its API to control voltages and clock frequencies, at least for the time being. I definitely need MMIO for GDS and memory timings, though...
ADL is useless - Linux has dropped that trash, and they probably will do the same for Windows shortly. Yeah, you are absolutely right about that... It seems that NiceHash is going to resurrect AMD support for excavator at last, so I need to do a ton of preparatory work before that actually happens.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 17, 2017, 09:45:23 PM |
|
UI looks good enough...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
UnclWish
|
|
November 17, 2017, 10:34:31 PM |
|
There is a pretty obscure API in ADL for I2C, right?
Actually, I can just off-load hardware management to MSI AfterBurner and use its API to control voltages and clock frequencies, at least for the time being. I definitely need MMIO for GDS and memory timings, though...
ADL is useless - Linux has dropped that trash, and they probably will do the same for Windows shortly. Yeah, you are absolutely right about that... It seems that NiceHash is going to resurrect AMD support for excavator at last, so I need to do a ton of preparatory work before that actually happens. Does it means that work on GGS now will be more slow? Dual modes for ethereum needed...
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 17, 2017, 11:39:16 PM |
|
There is a pretty obscure API in ADL for I2C, right?
Actually, I can just off-load hardware management to MSI AfterBurner and use its API to control voltages and clock frequencies, at least for the time being. I definitely need MMIO for GDS and memory timings, though...
ADL is useless - Linux has dropped that trash, and they probably will do the same for Windows shortly. Yeah, you are absolutely right about that... It seems that NiceHash is going to resurrect AMD support for excavator at last, so I need to do a ton of preparatory work before that actually happens. Does it means that work on GGS now will be more slow? Dual modes for ethereum needed... The number of hours I work for NiceHash remains (presumably) the same. No worries. Actually, dual-mining may help the magic peanuts... Which algo do you want first? I will let you choose.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 18, 2017, 12:03:51 AM |
|
Pascal, Sia, Lbry, Decred... That's about it, no?
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
UnclWish
|
|
November 18, 2017, 12:16:41 AM |
|
Pascal, Sia, Lbry, Decred... That's about it, no?
Yes. Lbry first please. Decred, Pascal, Sia may be added after.
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 18, 2017, 02:58:59 AM |
|
https://github.com/lbryio/lbrycrd-gpuIs this the fastest open-source OpenCL Lbry kernel out there? There is an issue about this not working with newer drivers, though. I feel I am spending most of my time debugging no matter where I go...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
vandyke
Newbie
Offline
Activity: 2
Merit: 0
|
|
November 18, 2017, 03:21:13 AM |
|
hello can you add electroneum to it?
been using your previous version for monero and its very very nice i want to shift to etn which is also based from monero
can you possibly add it?
|
|
|
|
Pils
Newbie
Offline
Activity: 23
Merit: 0
|
|
November 18, 2017, 09:24:54 AM |
|
I wonder if keccak could be dual mined? Its run at maximum mem clock reduction, so could run side by side with ETH no? Just thinking you would get more peanuts if you offered something others didnt... Thanks for your work
|
|
|
|
UnclWish
|
|
November 18, 2017, 11:19:23 AM |
|
What about X11Gost, Neoscrypt or Nist5 algos? Maybe one of them will be good for dual mining with ethereum?
|
|
|
|
UnclWish
|
|
November 18, 2017, 12:08:40 PM |
|
What about X11Gost, Neoscrypt or Nist5 algos? Maybe one of them will be good for dual mining with ethereum?
Neoscrypt would be TERRIBLE. X11Gost would have to be *very* carefully structured, and is likely just too damn big. Even NIST5 is likely too big. Thanks! It's seems that lbry, decred, pascal and sia algos is most suitable for dual mode with ethereum...
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 18, 2017, 04:06:25 PM |
|
hello can you add electroneum to it?
been using your previous version for monero and its very very nice i want to shift to etn which is also based from monero
can you possibly add it?
That should be possible with custom pools. I am polishing this feature now, and it should be ready today.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
seth6
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 18, 2017, 04:57:47 PM |
|
Hi, can you add. support for poloniex XMR address? Miner say invalid Xmr address, but in the status page ,I see my balance.
|
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 18, 2017, 05:54:21 PM |
|
Hi, can you add. support for poloniex XMR address? Miner say invalid Xmr address, but in the status page ,I see my balance.
It should work with the new version.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
November 18, 2017, 06:16:10 PM |
|
you miner has good interface but its not fast enough
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
November 18, 2017, 06:22:28 PM |
|
you miner has good interface but its not fast enough
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
Well, it is only optimized for a few cards so far... Which card do you have?
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
syraka76
Member
Offline
Activity: 83
Merit: 10
|
|
November 18, 2017, 06:37:45 PM |
|
zawawa for ETC. or btcgold? is ottimized? my card, 470, 480, 570, 580, 1070 all 8gb
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
November 18, 2017, 06:52:39 PM |
|
you miner has good interface but its not fast enough
with 16 / 8 i get 820 on cryptonight (sgminer 920h/s)
if i go higher with intensity or worksize its not stable
Well, it is only optimized for a few cards so far... Which card do you have? i have rx 580 8gb cards...i use rawintensity in sgminer which is better for cryptonight from my experience
|
|
|
|
|