[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[Converse]

hi Nemos

I do not understand, version 2.2. released ?
on the main page 2.1

[1715220029]

1715220029

[1715220029]

1715220029

[1715220029]

1715220029

[minerx117]

hi Nemos

I do not understand, version 2.2. released ?
on the main page 2.1

no you don't understand....  NemosMiner-v2.2 release should be in next couple days

[LeandroBR]

Good evening, I can not configure the two GPUs correctly. What is the command for NemosMiner-v1.7.6-ZPOOL to accept >>>> GTX 1060 6gb + GTX 750ti 2gb?

Example:
 
SET GPUccminer = 0,1,2,3,4,5 <<<<< ?
...
% A% -d% GPUccminer% -r 0 -a% A03% -o stratum + tcp: //%A03%.%POOL%: 5433 -u% ADDY% -p% PASS%

How should I configure the command line with both GPUs?

[minerx117]

Good evening, LeandroBR

NemosMiner-v1.7.6-ZPOOL to accept >>>> GTX 1060 6gb + GTX 750ti 2gb?

Example:
 
SET GPUccminer = 0,1

SET GPUewbf = 0 1

altho i havn't tested on 750ti as i sold them all a few years ago.... i do still have 1 lying round doing nothing, i'll put it in a rig and do some testing for you

Nemo

[LeandroBR]

Good evening, LeandroBR

NemosMiner-v1.7.6-ZPOOL to accept >>>> GTX 1060 6gb + GTX 750ti 2gb?

Example:
 
SET GPUccminer = 0,1

SET GPUewbf = 0 1

altho i havn't tested on 750ti as i sold them all a few years ago.... i do still have 1 lying round doing nothing, i'll put it in a rig and do some testing for you

Nemo

Many thanks, it works perfectly

The 750ti drive was missing, so I could not configure the two.

 

[guytechie]

Does this look right?  Qubit and X11 is to of the chart by a lot.  Crackfoo said he changed reporting those two in GH/s rather than MH/s.  Is this the reason why the  BTC/GH/Day and BTC/Day are way off?  Or is this the actual correct value?

PS: I edited the Nemosminer 2.1 to allow for Qubit and X11 because I also see it at the top of the charts in profitability on zPool's own site.

Code:

   Type: NVIDIA

Miner                  Algorithm           Speed BTC/Day BTC/GH/Day Pool
-----                  ---------           ----- ------- ---------- ----
ccminerAlexis78        Qubit          93.15 MH/s 0.29028    3.11609 Zpool-
CcminerAlexis78cuda8.0 Qubit          85.52 MH/s 0.26648    3.11609 Zpool-
CcminerAlexis78cuda8.0 X11            50.61 MH/s 0.16991    3.35752 Zpool-
CcminerSp-mod          X11            44.02 MH/s 0.14778    3.35752 Zpool-
ccminerAlexis78        Nist5         152.91 MH/s 0.00165    0.01078 Zpool-
CcminerKlaust          MyriadGroestl 224.87 MH/s 0.00163    0.00726 Zpool-
ccminerAlexis78        Lbry          887.38 MH/s 0.00162    0.00183 Zpool-
CcminerTpruvot         X11evo         39.16 MH/s 0.00161    0.04115 Zpool-
CcminerTpruvot         Lbry          876.89 MH/s 0.00160    0.00183 Zpool-
ccminerAlexis78        MyriadGroestl 216.86 MH/s 0.00157    0.00726 Zpool-
Ccminerskunk           Skunk          86.59 MH/s 0.00156    0.01807 Zpool-
CcminerTpruvot         Bitcore        49.41 MH/s 0.00156    0.03162 Zpool-
CcminerKlaust          Groestl       121.41 MH/s 0.00152    0.01255 Zpool-
CcminerKlaust          Nist5         137.19 MH/s 0.00148    0.01078 Zpool-
CcminerTpruvot         NeoScrypt       2.70 MH/s 0.00146    0.54154 Zpool-
ccminerAlexis78        Lyra2RE2      126.21 MH/s 0.00136    0.01075 Zpool-
ccminer-2.2            Keccak          1.73 GH/s 0.00126    0.00073 Zpool-
CcminerKlaust          Lyra2RE2      116.25 MH/s 0.00125    0.01075 Zpool-
ccminerAlexis78        X17            34.44 MH/s 0.00123    0.03561 Zpool-
CcminerKlaust          NeoScrypt       2.04 MH/s 0.00110    0.54154 Zpool-
ccminerAlexis78        Blakecoin      16.12 GH/s 0.00109    0.00007 Zpool-
ccminerAlexis78        C11            55.14 MH/s 0.00104    0.01885 Zpool-
CcminerTpruvot         Timetravel     72.48 MH/s 0.00104    0.01433 Zpool-
CcminerTpruvot         X17            28.38 MH/s 0.00101    0.03561 Zpool-
CcminerTpruvot         Blakecoin      14.33 GH/s 0.00097    0.00007 Zpool-
ccminerAlexis78        Blake2s        13.01 GH/s 0.00094    0.00007 Zpool-
CcminerTpruvot         Blake2s        12.02 GH/s 0.00087    0.00007 Zpool-
CcminerSp-mod          C11            43.00 MH/s 0.00081    0.01885 Zpool-
ccminerAlexis78        Skein           1.77 GH/s 0.00078    0.00044 Zpool-
CcminerTpruvot         hmq1725        13.49 MH/s 0.00075    0.05542 Zpool-
ccminer-2.2            Jha            43.22 MH/s 0.00073    0.01686 Zpool-
ccminer-2.2            Tribus        139.96 MH/s 0.00058    0.00417 Zpool-
ccminerAlexis78        NeoScrypt     987.18 KH/s 0.00053    0.54154 Zpool-
ccminerAlexis78        Sib            38.67 MH/s 0.00033    0.00865 Zpool-
CcminerAlexis78cuda8.0 Sib            37.22 MH/s 0.00032    0.00865 Zpool-
CcminerTpruvot         Sib            26.30 MH/s 0.00023    0.00865 Zpool-

[oossaa]

Does this look right?  Qubit and X11 is to of the chart by a lot.  Crackfoo said he changed reporting those two in GH/s rather than MH/s.  Is this the reason why the  BTC/GH/Day and BTC/Day are way off?  Or is this the actual correct value?

PS: I edited the Nemosminer 2.1 to allow for Qubit and X11 because I also see it at the top of the charts in profitability on zPool's own site.

Code:

   Type: NVIDIA

Miner                  Algorithm           Speed BTC/Day BTC/GH/Day Pool
-----                  ---------           ----- ------- ---------- ----
ccminerAlexis78        Qubit          93.15 MH/s 0.29028    3.11609 Zpool-
CcminerAlexis78cuda8.0 Qubit          85.52 MH/s 0.26648    3.11609 Zpool-
CcminerAlexis78cuda8.0 X11            50.61 MH/s 0.16991    3.35752 Zpool-
CcminerSp-mod          X11            44.02 MH/s 0.14778    3.35752 Zpool-
ccminerAlexis78        Nist5         152.91 MH/s 0.00165    0.01078 Zpool-
CcminerKlaust          MyriadGroestl 224.87 MH/s 0.00163    0.00726 Zpool-
ccminerAlexis78        Lbry          887.38 MH/s 0.00162    0.00183 Zpool-
CcminerTpruvot         X11evo         39.16 MH/s 0.00161    0.04115 Zpool-
CcminerTpruvot         Lbry          876.89 MH/s 0.00160    0.00183 Zpool-
ccminerAlexis78        MyriadGroestl 216.86 MH/s 0.00157    0.00726 Zpool-
Ccminerskunk           Skunk          86.59 MH/s 0.00156    0.01807 Zpool-
CcminerTpruvot         Bitcore        49.41 MH/s 0.00156    0.03162 Zpool-
CcminerKlaust          Groestl       121.41 MH/s 0.00152    0.01255 Zpool-
CcminerKlaust          Nist5         137.19 MH/s 0.00148    0.01078 Zpool-
CcminerTpruvot         NeoScrypt       2.70 MH/s 0.00146    0.54154 Zpool-
ccminerAlexis78        Lyra2RE2      126.21 MH/s 0.00136    0.01075 Zpool-
ccminer-2.2            Keccak          1.73 GH/s 0.00126    0.00073 Zpool-
CcminerKlaust          Lyra2RE2      116.25 MH/s 0.00125    0.01075 Zpool-
ccminerAlexis78        X17            34.44 MH/s 0.00123    0.03561 Zpool-
CcminerKlaust          NeoScrypt       2.04 MH/s 0.00110    0.54154 Zpool-
ccminerAlexis78        Blakecoin      16.12 GH/s 0.00109    0.00007 Zpool-
ccminerAlexis78        C11            55.14 MH/s 0.00104    0.01885 Zpool-
CcminerTpruvot         Timetravel     72.48 MH/s 0.00104    0.01433 Zpool-
CcminerTpruvot         X17            28.38 MH/s 0.00101    0.03561 Zpool-
CcminerTpruvot         Blakecoin      14.33 GH/s 0.00097    0.00007 Zpool-
ccminerAlexis78        Blake2s        13.01 GH/s 0.00094    0.00007 Zpool-
CcminerTpruvot         Blake2s        12.02 GH/s 0.00087    0.00007 Zpool-
CcminerSp-mod          C11            43.00 MH/s 0.00081    0.01885 Zpool-
ccminerAlexis78        Skein           1.77 GH/s 0.00078    0.00044 Zpool-
CcminerTpruvot         hmq1725        13.49 MH/s 0.00075    0.05542 Zpool-
ccminer-2.2            Jha            43.22 MH/s 0.00073    0.01686 Zpool-
ccminer-2.2            Tribus        139.96 MH/s 0.00058    0.00417 Zpool-
ccminerAlexis78        NeoScrypt     987.18 KH/s 0.00053    0.54154 Zpool-
ccminerAlexis78        Sib            38.67 MH/s 0.00033    0.00865 Zpool-
CcminerAlexis78cuda8.0 Sib            37.22 MH/s 0.00032    0.00865 Zpool-
CcminerTpruvot         Sib            26.30 MH/s 0.00023    0.00865 Zpool-

May be in Zpool.ps1 to add:
        

Code:

         "equihash"{$Divisor /= 1000}
        "blake2s"{$Divisor *= 1000}
        "blakecoin"{$Divisor *= 1000}
        "qubit"{$Divisor *= 1000}
        "quark"{$Divisor *= 1000}
        "x11"{$Divisor *= 1000}
        "decred"{$Divisor *= 1000}

[guytechie]

May be in Zpool.ps1 to add:
        

Code:

         "equihash"{$Divisor /= 1000}
        "blake2s"{$Divisor *= 1000}
        "blakecoin"{$Divisor *= 1000}
        "qubit"{$Divisor *= 1000}
        "quark"{$Divisor *= 1000}
        "x11"{$Divisor *= 1000}
        "decred"{$Divisor *= 1000}

Thanks.  After adding that, it looks like this now:

Code:

   Type: NVIDIA

Miner                  Algorithm           Speed BTC/Day BTC/GH/Day Pool
-----                  ---------           ----- ------- ---------- ----
ccminerAlexis78        Sib            38.67 MH/s 0.00237    0.06137 Zpool-
CcminerAlexis78cuda8.0 Sib            37.22 MH/s 0.00228    0.06137 Zpool-
ccminerAlexis78        Skein           1.77 GH/s 0.00225    0.00127 Zpool-
Ccminerskunk           Skunk          86.59 MH/s 0.00210    0.02430 Zpool-
CcminerKlaust          MyriadGroestl 224.87 MH/s 0.00207    0.00922 Zpool-
ccminerAlexis78        MyriadGroestl 216.86 MH/s 0.00200    0.00922 Zpool-
CcminerTpruvot         hmq1725        13.49 MH/s 0.00183    0.13597 Zpool-
ccminerAlexis78        Lyra2RE2      126.21 MH/s 0.00178    0.01409 Zpool-
ccminerAlexis78        Lbry          887.38 MH/s 0.00164    0.00185 Zpool-
CcminerKlaust          Lyra2RE2      116.25 MH/s 0.00164    0.01409 Zpool-
CcminerTpruvot         Lbry          876.89 MH/s 0.00162    0.00185 Zpool-
CcminerTpruvot         Sib            26.30 MH/s 0.00161    0.06137 Zpool-
CcminerKlaust          Groestl       121.41 MH/s 0.00161    0.01323 Zpool-
CcminerTpruvot         Bitcore        49.41 MH/s 0.00156    0.03162 Zpool-
ccminerAlexis78        Nist5         152.91 MH/s 0.00148    0.00970 Zpool-
CcminerKlaust          Nist5         137.19 MH/s 0.00133    0.00970 Zpool-
CcminerTpruvot         X11evo         39.16 MH/s 0.00132    0.03371 Zpool-
ccminer-2.2            Keccak          1.73 GH/s 0.00131    0.00076 Zpool-
ccminerAlexis78        Blake2s        13.01 GH/s 0.00128    0.00010 Zpool-
ccminerAlexis78        C11            55.14 MH/s 0.00119    0.02164 Zpool-
CcminerTpruvot         Blake2s        12.02 GH/s 0.00118    0.00010 Zpool-
CcminerTpruvot         NeoScrypt       2.70 MH/s 0.00116    0.42985 Zpool-
ccminerAlexis78        X17            34.44 MH/s 0.00105    0.03051 Zpool-
CcminerTpruvot         Timetravel     72.48 MH/s 0.00104    0.01433 Zpool-
CcminerSp-mod          C11            43.00 MH/s 0.00093    0.02164 Zpool-
CcminerKlaust          NeoScrypt       2.04 MH/s 0.00088    0.42985 Zpool-
CcminerTpruvot         X17            28.38 MH/s 0.00087    0.03051 Zpool-
ccminerAlexis78        Blakecoin      16.12 GH/s 0.00076    0.00005 Zpool-
ccminer-2.2            Jha            43.22 MH/s 0.00072    0.01677 Zpool-
CcminerTpruvot         Blakecoin      14.33 GH/s 0.00068    0.00005 Zpool-
ccminer-2.2            Tribus        139.96 MH/s 0.00059    0.00423 Zpool-
ccminerAlexis78        NeoScrypt     987.18 KH/s 0.00042    0.42985 Zpool-
ccminerAlexis78        Qubit          93.15 MH/s 0.00023    0.00244 Zpool-
CcminerAlexis78cuda8.0 Qubit          85.52 MH/s 0.00021    0.00244 Zpool-
CcminerAlexis78cuda8.0 X11            50.61 MH/s 0.00014    0.00286 Zpool-
CcminerSp-mod          X11            44.02 MH/s 0.00013    0.00286 Zpool-

[guytechie]

NemosMiner-v2.2 Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo to get optimal speeds / Fully automated / Set And Forget / Auto Downloads Miners

Easy Setup
step 1: EDIT 'start.bat' change my BTC address to yours, SAVE file
step 2: EDIT 'start.bat' change -SelGPU to suit your cards, SAVE file
step 3:Run 'start.bat'

If you have Windows 7, please update PowerShell:
https://www.microsoft.com/en-us/download/details.aspx?id=50395
CCMiner may need 'MSVCR120.dll' if you don't already have it:
https://www.microsoft.com/en-gb/download/details.aspx?id=40784
CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it:
https://www.microsoft.com/en-us/download/details.aspx?id=48145
running multiple cards its recommend to increase Virtual Memory 32gb-64gb is optimal

Doesn't the current version (2.1) do that already?  What's new with 2.2?  Any added algos?

[RDMPlaysGames]

How exactly do you disable alexis? My 6 voucher rig just crashes constantly with it.

[Windozxpert]

Qubit and quark should be included in this

[kopija]

How exactly do you disable alexis? My 6 voucher rig just crashes constantly with it.

Just put # infront of algo in ccminerAlexis78.ps1
But first try removing/lowering the intensities.
I read somewhere that Alexis has higher default intensities, more suited for 1070/1080/ti.
Also "skunk" = " -i 26 -d $SelGPUCC" #Skunk in tpruvot miner could be too high for non-1080ti?

[EvilMonkey]

How exactly do you disable alexis? My 6 voucher rig just crashes constantly with it.

Just put # infront of algo in ccminerAlexis78.ps1
But first try removing/lowering the intensities.
I read somewhere that Alexis has higher default intensities, more suited for 1070/1080/ti.
Also "skunk" = " -i 26 -d $SelGPUCC" #Skunk in tpruvot miner could be too high for non-1080ti?

Are the intensity changed in the bat file?

[amitim]

Thanks "saul.goodman" i'll add that code to my test rig soon


NemosMiner-v2.2 multi algo profit switching NVIDIA miner  

https://github.com/nemosminer/NemosMiner-v2.0-Zpool/archive/master.zip

still being tested on 1070 and 1080ti atm this is work in progress

bug fixes and a few more features to come

NemosMiner-v2.2 release should be in next couple days  

Best Regards
Nemo

I have 2x1070GTX

Code:

   Type: NVIDIA

Miner           Algorithm           Speed BTC/Day BTC/GH/Day Pool
-----           ---------           ----- ------- ---------- ----
ccminerAlexis78 Lyra2RE2        8,36 GH/s 0,09688    0,01159 zpoollive-
ccminerAlexis78 Blake2s         8,73 GH/s 0,00153    0,00018 zpoollive-
ccminerAlexis78 NeoScrypt       2,51 MH/s 0,00146    0,58245 zpoollive-
ccminerAlexis78 Lbry          602,82 MH/s 0,00143    0,00237 zpoollive-

I think that lyra2re2 wrong determines the BTC/Day.

I added to zpoollive.ps1

Code:

"lyra2re2"{$Divisor *= 1000}

It's correct? Now i see

Code:

ccminerAlexis78 Lyra2RE2        86,92 MH/s      0,00094    0,01086 zpoollive-
CcminerTpruvot  X11evo          27,73 MH/s      0,00092    0,03327 zpoollive-
EWBF            Equihash       954,00  H/s      0,00086  905,86000 zpoollive-
ccminerAlexis78 NeoScrypt        2,52 MH/s      0,00085    0,33891 zpoollive-
CcminerTpruvot  Blakecoin        9,31 GH/s      0,00082    0,00009 zpoollive-
CcminerSp-mod   C11             30,14 MH/s      0,00081    0,02682 zpoollive-
CcminerKlaust   NeoScrypt        2,38 MH/s      0,00081    0,33891 zpoollive-
CcminerKlaust   Lyra2RE2        71,67 MH/s      0,00078    0,01086 zpoollive-

[kopija]

How exactly do you disable alexis? My 6 voucher rig just crashes constantly with it.

Just put # infront of algo in ccminerAlexis78.ps1
But first try removing/lowering the intensities.
I read somewhere that Alexis has higher default intensities, more suited for 1070/1080/ti.
Also "skunk" = " -i 26 -d $SelGPUCC" #Skunk in tpruvot miner could be too high for non-1080ti?

Are the intensity changed in the bat file?

Look in "miners" folder.

[nodice]

Hey Everybody, brand new here. I was mining Ethereum on Linux with Claymore for a bit until the difficulty got up there.  Now I have decided to use Nemos Miner. I would prefer Linux, but I found an old Windows 7 license key in a drawer and went on to install Nemos Miner. I like the idea of algorithm switching, so we'll see how it goes. I just have a couple of questions to see what your thoughts are.

One thing I have noticed is that sometimes Nemos Miner will only start 2 threads. All 5 GPUs are recognized by the OS. I have seen Nemos Miner run with 5 threads. It appears that when certain algos/miners launch, only 2 out of 5 threads are running. This is of course a big concern, since any gain in mining profits using algos would be more than lost. The only pattern I have seen so far is that it happens every time 'skein' is running. Is the solution to disable skein, or are others having this problem? I have 4 GTX 1070s and 1 1080.

My other major question is about the temperature control. Is the best way to control temperature with MSI afterburner (I have an MSI board). With Claymore miner, I controlled target GPU temperatures and shutoff temperatures at the command line. That was a nice feature. Since Nemos is running multiple miners, I am assuming controlling temperature becomes more difficult. Would temp targets have to be set in the miner powershell files, or is it best to handle it at the OS level in Windows? I have never been a gamer just a hardware guy, so GPU optimization is kind of new to me.

Anyways, thanks to Nemo for the project. If there is a Linux version I am missing, please let me know!

-Austin

[kopija]

MSI Afterburner is what you need, you will need to lower power limit, increase clocks and lower memory when using ccminer algos.
Check
https://bitcointalk.org/index.php?topic=2054800.0
and
https://bitcointalk.org/index.php?topic=1940567.msg21150247#new
for exact procedures/values to use.

[dragonmike]

Hey Everybody, brand new here. I was mining Ethereum on Linux with Claymore for a bit until the difficulty got up there.  Now I have decided to use Nemos Miner. I would prefer Linux, but I found an old Windows 7 license key in a drawer and went on to install Nemos Miner. I like the idea of algorithm switching, so we'll see how it goes. I just have a couple of questions to see what your thoughts are.

One thing I have noticed is that sometimes Nemos Miner will only start 2 threads. All 5 GPUs are recognized by the OS. I have seen Nemos Miner run with 5 threads. It appears that when certain algos/miners launch, only 2 out of 5 threads are running. This is of course a big concern, since any gain in mining profits using algos would be more than lost. The only pattern I have seen so far is that it happens every time 'skein' is running. Is the solution to disable skein, or are others having this problem? I have 4 GTX 1070s and 1 1080.

ccminer-Alexis is the culprit here, not the algo. It sometimes takes a long time to start all threads. Sometimes several minutes... which indeed is annoying. You could disable Alexis alltogether and tell SPmod to mine Skein instead. It's a little bit slower though.

[nodice]

MSI Afterburner is what you need, you will need to lower power limit, increase clocks and lower memory when using ccminer algos.
Check
https://bitcointalk.org/index.php?topic=2054800.0
and
https://bitcointalk.org/index.php?topic=1940567.msg21150247#new
for exact procedures/values to use.

Thanks, I reviewed those threads and I am able to manage temperature a little better now. However, the values on the example images appear to have increased memory (you said to decrease memory when using ccminer). I used clock + 250 and memory + 650.  Ccminer began to crash, so I reduced to memory +350. I am still seeing Ccminer crashes, so I will bump it down even more? 

[nodice]

Hey Everybody, brand new here. I was mining Ethereum on Linux with Claymore for a bit until the difficulty got up there.  Now I have decided to use Nemos Miner. I would prefer Linux, but I found an old Windows 7 license key in a drawer and went on to install Nemos Miner. I like the idea of algorithm switching, so we'll see how it goes. I just have a couple of questions to see what your thoughts are.

One thing I have noticed is that sometimes Nemos Miner will only start 2 threads. All 5 GPUs are recognized by the OS. I have seen Nemos Miner run with 5 threads. It appears that when certain algos/miners launch, only 2 out of 5 threads are running. This is of course a big concern, since any gain in mining profits using algos would be more than lost. The only pattern I have seen so far is that it happens every time 'skein' is running. Is the solution to disable skein, or are others having this problem? I have 4 GTX 1070s and 1 1080.

ccminer-Alexis is the culprit here, not the algo. It sometimes takes a long time to start all threads. Sometimes several minutes... which indeed is annoying. You could disable Alexis alltogether and tell SPmod to mine Skein instead. It's a little bit slower though.

I did see it happen with Alexis, but I have been watching as much as possible, and I have seen the same issue on Tpruvot. Since Nemos miner is regularly relaunching miners, what I am seeing is that it will run all the threads immediately or it won't. It doesn't appear to start mining all threads after several minutes; it will only do it when it switches to a miner that runs all threads. It appears to be running half the cards half of the time.

I also do not see a way to disable the miner. I see where algos can be disabled. Where do you disable a miner?

Should I reset Nemo benchmark settings after making changes to GPU settings?