Converse
Newbie
Offline
Activity: 5
Merit: 0
|
|
August 19, 2017, 06:17:46 PM |
|
hi Nemos
I do not understand, version 2.2. released ? on the main page 2.1
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
August 19, 2017, 06:47:13 PM |
|
hi Nemos
I do not understand, version 2.2. released ? on the main page 2.1
no you don't understand.... NemosMiner-v2.2 release should be in next couple days
|
NemosMiner-v3.8.1.3
|
|
|
LeandroBR
Newbie
Offline
Activity: 6
Merit: 0
|
|
August 19, 2017, 08:46:56 PM |
|
Good evening, I can not configure the two GPUs correctly. What is the command for NemosMiner-v1.7.6-ZPOOL to accept >>>> GTX 1060 6gb + GTX 750ti 2gb?Example: SET GPUccminer = 0,1,2,3,4,5 <<<<< ? ... % A% -d% GPUccminer% -r 0 -a% A03% -o stratum + tcp: //%A03%.%POOL%: 5433 -u% ADDY% -p% PASS%How should I configure the command line with both GPUs?
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
August 19, 2017, 09:38:12 PM |
|
Good evening, LeandroBR
NemosMiner-v1.7.6-ZPOOL to accept >>>> GTX 1060 6gb + GTX 750ti 2gb?
Example: SET GPUccminer = 0,1
SET GPUewbf = 0 1
altho i havn't tested on 750ti as i sold them all a few years ago.... i do still have 1 lying round doing nothing, i'll put it in a rig and do some testing for you
Nemo
|
NemosMiner-v3.8.1.3
|
|
|
LeandroBR
Newbie
Offline
Activity: 6
Merit: 0
|
|
August 19, 2017, 11:01:55 PM |
|
Good evening, LeandroBR
NemosMiner-v1.7.6-ZPOOL to accept >>>> GTX 1060 6gb + GTX 750ti 2gb?
Example: SET GPUccminer = 0,1
SET GPUewbf = 0 1
altho i havn't tested on 750ti as i sold them all a few years ago.... i do still have 1 lying round doing nothing, i'll put it in a rig and do some testing for you
Nemo
Many thanks, it works perfectly The 750ti drive was missing, so I could not configure the two.
|
|
|
|
guytechie
|
|
August 20, 2017, 03:59:59 PM |
|
Does this look right? Qubit and X11 is to of the chart by a lot. Crackfoo said he changed reporting those two in GH/s rather than MH/s. Is this the reason why the BTC/GH/Day and BTC/Day are way off? Or is this the actual correct value? PS: I edited the Nemosminer 2.1 to allow for Qubit and X11 because I also see it at the top of the charts in profitability on zPool's own site. Type: NVIDIA
Miner Algorithm Speed BTC/Day BTC/GH/Day Pool ----- --------- ----- ------- ---------- ---- ccminerAlexis78 Qubit 93.15 MH/s 0.29028 3.11609 Zpool- CcminerAlexis78cuda8.0 Qubit 85.52 MH/s 0.26648 3.11609 Zpool- CcminerAlexis78cuda8.0 X11 50.61 MH/s 0.16991 3.35752 Zpool- CcminerSp-mod X11 44.02 MH/s 0.14778 3.35752 Zpool- ccminerAlexis78 Nist5 152.91 MH/s 0.00165 0.01078 Zpool- CcminerKlaust MyriadGroestl 224.87 MH/s 0.00163 0.00726 Zpool- ccminerAlexis78 Lbry 887.38 MH/s 0.00162 0.00183 Zpool- CcminerTpruvot X11evo 39.16 MH/s 0.00161 0.04115 Zpool- CcminerTpruvot Lbry 876.89 MH/s 0.00160 0.00183 Zpool- ccminerAlexis78 MyriadGroestl 216.86 MH/s 0.00157 0.00726 Zpool- Ccminerskunk Skunk 86.59 MH/s 0.00156 0.01807 Zpool- CcminerTpruvot Bitcore 49.41 MH/s 0.00156 0.03162 Zpool- CcminerKlaust Groestl 121.41 MH/s 0.00152 0.01255 Zpool- CcminerKlaust Nist5 137.19 MH/s 0.00148 0.01078 Zpool- CcminerTpruvot NeoScrypt 2.70 MH/s 0.00146 0.54154 Zpool- ccminerAlexis78 Lyra2RE2 126.21 MH/s 0.00136 0.01075 Zpool- ccminer-2.2 Keccak 1.73 GH/s 0.00126 0.00073 Zpool- CcminerKlaust Lyra2RE2 116.25 MH/s 0.00125 0.01075 Zpool- ccminerAlexis78 X17 34.44 MH/s 0.00123 0.03561 Zpool- CcminerKlaust NeoScrypt 2.04 MH/s 0.00110 0.54154 Zpool- ccminerAlexis78 Blakecoin 16.12 GH/s 0.00109 0.00007 Zpool- ccminerAlexis78 C11 55.14 MH/s 0.00104 0.01885 Zpool- CcminerTpruvot Timetravel 72.48 MH/s 0.00104 0.01433 Zpool- CcminerTpruvot X17 28.38 MH/s 0.00101 0.03561 Zpool- CcminerTpruvot Blakecoin 14.33 GH/s 0.00097 0.00007 Zpool- ccminerAlexis78 Blake2s 13.01 GH/s 0.00094 0.00007 Zpool- CcminerTpruvot Blake2s 12.02 GH/s 0.00087 0.00007 Zpool- CcminerSp-mod C11 43.00 MH/s 0.00081 0.01885 Zpool- ccminerAlexis78 Skein 1.77 GH/s 0.00078 0.00044 Zpool- CcminerTpruvot hmq1725 13.49 MH/s 0.00075 0.05542 Zpool- ccminer-2.2 Jha 43.22 MH/s 0.00073 0.01686 Zpool- ccminer-2.2 Tribus 139.96 MH/s 0.00058 0.00417 Zpool- ccminerAlexis78 NeoScrypt 987.18 KH/s 0.00053 0.54154 Zpool- ccminerAlexis78 Sib 38.67 MH/s 0.00033 0.00865 Zpool- CcminerAlexis78cuda8.0 Sib 37.22 MH/s 0.00032 0.00865 Zpool- CcminerTpruvot Sib 26.30 MH/s 0.00023 0.00865 Zpool-
|
Put something in my tip jar if I made your day. BTC: 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu
|
|
|
oossaa
Newbie
Offline
Activity: 56
Merit: 0
|
|
August 20, 2017, 04:22:05 PM |
|
Does this look right? Qubit and X11 is to of the chart by a lot. Crackfoo said he changed reporting those two in GH/s rather than MH/s. Is this the reason why the BTC/GH/Day and BTC/Day are way off? Or is this the actual correct value? PS: I edited the Nemosminer 2.1 to allow for Qubit and X11 because I also see it at the top of the charts in profitability on zPool's own site. Type: NVIDIA
Miner Algorithm Speed BTC/Day BTC/GH/Day Pool ----- --------- ----- ------- ---------- ---- ccminerAlexis78 Qubit 93.15 MH/s 0.29028 3.11609 Zpool- CcminerAlexis78cuda8.0 Qubit 85.52 MH/s 0.26648 3.11609 Zpool- CcminerAlexis78cuda8.0 X11 50.61 MH/s 0.16991 3.35752 Zpool- CcminerSp-mod X11 44.02 MH/s 0.14778 3.35752 Zpool- ccminerAlexis78 Nist5 152.91 MH/s 0.00165 0.01078 Zpool- CcminerKlaust MyriadGroestl 224.87 MH/s 0.00163 0.00726 Zpool- ccminerAlexis78 Lbry 887.38 MH/s 0.00162 0.00183 Zpool- CcminerTpruvot X11evo 39.16 MH/s 0.00161 0.04115 Zpool- CcminerTpruvot Lbry 876.89 MH/s 0.00160 0.00183 Zpool- ccminerAlexis78 MyriadGroestl 216.86 MH/s 0.00157 0.00726 Zpool- Ccminerskunk Skunk 86.59 MH/s 0.00156 0.01807 Zpool- CcminerTpruvot Bitcore 49.41 MH/s 0.00156 0.03162 Zpool- CcminerKlaust Groestl 121.41 MH/s 0.00152 0.01255 Zpool- CcminerKlaust Nist5 137.19 MH/s 0.00148 0.01078 Zpool- CcminerTpruvot NeoScrypt 2.70 MH/s 0.00146 0.54154 Zpool- ccminerAlexis78 Lyra2RE2 126.21 MH/s 0.00136 0.01075 Zpool- ccminer-2.2 Keccak 1.73 GH/s 0.00126 0.00073 Zpool- CcminerKlaust Lyra2RE2 116.25 MH/s 0.00125 0.01075 Zpool- ccminerAlexis78 X17 34.44 MH/s 0.00123 0.03561 Zpool- CcminerKlaust NeoScrypt 2.04 MH/s 0.00110 0.54154 Zpool- ccminerAlexis78 Blakecoin 16.12 GH/s 0.00109 0.00007 Zpool- ccminerAlexis78 C11 55.14 MH/s 0.00104 0.01885 Zpool- CcminerTpruvot Timetravel 72.48 MH/s 0.00104 0.01433 Zpool- CcminerTpruvot X17 28.38 MH/s 0.00101 0.03561 Zpool- CcminerTpruvot Blakecoin 14.33 GH/s 0.00097 0.00007 Zpool- ccminerAlexis78 Blake2s 13.01 GH/s 0.00094 0.00007 Zpool- CcminerTpruvot Blake2s 12.02 GH/s 0.00087 0.00007 Zpool- CcminerSp-mod C11 43.00 MH/s 0.00081 0.01885 Zpool- ccminerAlexis78 Skein 1.77 GH/s 0.00078 0.00044 Zpool- CcminerTpruvot hmq1725 13.49 MH/s 0.00075 0.05542 Zpool- ccminer-2.2 Jha 43.22 MH/s 0.00073 0.01686 Zpool- ccminer-2.2 Tribus 139.96 MH/s 0.00058 0.00417 Zpool- ccminerAlexis78 NeoScrypt 987.18 KH/s 0.00053 0.54154 Zpool- ccminerAlexis78 Sib 38.67 MH/s 0.00033 0.00865 Zpool- CcminerAlexis78cuda8.0 Sib 37.22 MH/s 0.00032 0.00865 Zpool- CcminerTpruvot Sib 26.30 MH/s 0.00023 0.00865 Zpool-
May be in Zpool.ps1 to add: "equihash"{$Divisor /= 1000} "blake2s"{$Divisor *= 1000} "blakecoin"{$Divisor *= 1000} "qubit"{$Divisor *= 1000} "quark"{$Divisor *= 1000} "x11"{$Divisor *= 1000} "decred"{$Divisor *= 1000}
|
|
|
|
guytechie
|
|
August 20, 2017, 04:54:14 PM |
|
May be in Zpool.ps1 to add: "equihash"{$Divisor /= 1000} "blake2s"{$Divisor *= 1000} "blakecoin"{$Divisor *= 1000} "qubit"{$Divisor *= 1000} "quark"{$Divisor *= 1000} "x11"{$Divisor *= 1000} "decred"{$Divisor *= 1000} Thanks. After adding that, it looks like this now: Type: NVIDIA
Miner Algorithm Speed BTC/Day BTC/GH/Day Pool ----- --------- ----- ------- ---------- ---- ccminerAlexis78 Sib 38.67 MH/s 0.00237 0.06137 Zpool- CcminerAlexis78cuda8.0 Sib 37.22 MH/s 0.00228 0.06137 Zpool- ccminerAlexis78 Skein 1.77 GH/s 0.00225 0.00127 Zpool- Ccminerskunk Skunk 86.59 MH/s 0.00210 0.02430 Zpool- CcminerKlaust MyriadGroestl 224.87 MH/s 0.00207 0.00922 Zpool- ccminerAlexis78 MyriadGroestl 216.86 MH/s 0.00200 0.00922 Zpool- CcminerTpruvot hmq1725 13.49 MH/s 0.00183 0.13597 Zpool- ccminerAlexis78 Lyra2RE2 126.21 MH/s 0.00178 0.01409 Zpool- ccminerAlexis78 Lbry 887.38 MH/s 0.00164 0.00185 Zpool- CcminerKlaust Lyra2RE2 116.25 MH/s 0.00164 0.01409 Zpool- CcminerTpruvot Lbry 876.89 MH/s 0.00162 0.00185 Zpool- CcminerTpruvot Sib 26.30 MH/s 0.00161 0.06137 Zpool- CcminerKlaust Groestl 121.41 MH/s 0.00161 0.01323 Zpool- CcminerTpruvot Bitcore 49.41 MH/s 0.00156 0.03162 Zpool- ccminerAlexis78 Nist5 152.91 MH/s 0.00148 0.00970 Zpool- CcminerKlaust Nist5 137.19 MH/s 0.00133 0.00970 Zpool- CcminerTpruvot X11evo 39.16 MH/s 0.00132 0.03371 Zpool- ccminer-2.2 Keccak 1.73 GH/s 0.00131 0.00076 Zpool- ccminerAlexis78 Blake2s 13.01 GH/s 0.00128 0.00010 Zpool- ccminerAlexis78 C11 55.14 MH/s 0.00119 0.02164 Zpool- CcminerTpruvot Blake2s 12.02 GH/s 0.00118 0.00010 Zpool- CcminerTpruvot NeoScrypt 2.70 MH/s 0.00116 0.42985 Zpool- ccminerAlexis78 X17 34.44 MH/s 0.00105 0.03051 Zpool- CcminerTpruvot Timetravel 72.48 MH/s 0.00104 0.01433 Zpool- CcminerSp-mod C11 43.00 MH/s 0.00093 0.02164 Zpool- CcminerKlaust NeoScrypt 2.04 MH/s 0.00088 0.42985 Zpool- CcminerTpruvot X17 28.38 MH/s 0.00087 0.03051 Zpool- ccminerAlexis78 Blakecoin 16.12 GH/s 0.00076 0.00005 Zpool- ccminer-2.2 Jha 43.22 MH/s 0.00072 0.01677 Zpool- CcminerTpruvot Blakecoin 14.33 GH/s 0.00068 0.00005 Zpool- ccminer-2.2 Tribus 139.96 MH/s 0.00059 0.00423 Zpool- ccminerAlexis78 NeoScrypt 987.18 KH/s 0.00042 0.42985 Zpool- ccminerAlexis78 Qubit 93.15 MH/s 0.00023 0.00244 Zpool- CcminerAlexis78cuda8.0 Qubit 85.52 MH/s 0.00021 0.00244 Zpool- CcminerAlexis78cuda8.0 X11 50.61 MH/s 0.00014 0.00286 Zpool- CcminerSp-mod X11 44.02 MH/s 0.00013 0.00286 Zpool-
|
Put something in my tip jar if I made your day. BTC: 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu
|
|
|
guytechie
|
|
August 20, 2017, 05:02:32 PM |
|
Doesn't the current version (2.1) do that already? What's new with 2.2? Any added algos?
|
Put something in my tip jar if I made your day. BTC: 1MkmBHDjonAFXui6JEx9ZmEemfMtUo9Cmu
|
|
|
RDMPlaysGames
Newbie
Offline
Activity: 16
Merit: 0
|
|
August 24, 2017, 12:10:35 AM |
|
How exactly do you disable alexis? My 6 voucher rig just crashes constantly with it.
|
|
|
|
Windozxpert
|
|
August 24, 2017, 12:25:00 AM |
|
Qubit and quark should be included in this
|
There's no I in team, but there is a "Me" if you jumble it up. ~ House, M.D.
|
|
|
kopija
|
|
August 24, 2017, 04:12:17 AM Last edit: August 24, 2017, 07:35:07 AM by kopija |
|
How exactly do you disable alexis? My 6 voucher rig just crashes constantly with it.
Just put # infront of algo in ccminerAlexis78.ps1 But first try removing/lowering the intensities. I read somewhere that Alexis has higher default intensities, more suited for 1070/1080/ti. Also "skunk" = " -i 26 -d $SelGPUCC" #Skunk in tpruvot miner could be too high for non-1080ti?
|
we are nothing but a smart contracts on a cosmic blockchain
|
|
|
EvilMonkey
|
|
August 24, 2017, 01:31:35 PM |
|
How exactly do you disable alexis? My 6 voucher rig just crashes constantly with it.
Just put # infront of algo in ccminerAlexis78.ps1 But first try removing/lowering the intensities. I read somewhere that Alexis has higher default intensities, more suited for 1070/1080/ti. Also "skunk" = " -i 26 -d $SelGPUCC" #Skunk in tpruvot miner could be too high for non-1080ti? Are the intensity changed in the bat file?
|
|
|
|
amitim
Newbie
Offline
Activity: 59
Merit: 0
|
|
August 24, 2017, 04:35:21 PM |
|
Thanks "saul.goodman" i'll add that code to my test rig soon NemosMiner-v2.2 multi algo profit switching NVIDIA miner https://github.com/nemosminer/NemosMiner-v2.0-Zpool/archive/master.zipstill being tested on 1070 and 1080ti atm this is work in progress bug fixes and a few more features to come NemosMiner-v2.2 release should be in next couple days Best Regards Nemo I have 2x1070GTX Type: NVIDIA
Miner Algorithm Speed BTC/Day BTC/GH/Day Pool ----- --------- ----- ------- ---------- ---- ccminerAlexis78 Lyra2RE2 8,36 GH/s 0,09688 0,01159 zpoollive- ccminerAlexis78 Blake2s 8,73 GH/s 0,00153 0,00018 zpoollive- ccminerAlexis78 NeoScrypt 2,51 MH/s 0,00146 0,58245 zpoollive- ccminerAlexis78 Lbry 602,82 MH/s 0,00143 0,00237 zpoollive- I think that lyra2re2 wrong determines the BTC/Day. I added to zpoollive.ps1 "lyra2re2"{$Divisor *= 1000} It's correct? Now i see ccminerAlexis78 Lyra2RE2 86,92 MH/s 0,00094 0,01086 zpoollive- CcminerTpruvot X11evo 27,73 MH/s 0,00092 0,03327 zpoollive- EWBF Equihash 954,00 H/s 0,00086 905,86000 zpoollive- ccminerAlexis78 NeoScrypt 2,52 MH/s 0,00085 0,33891 zpoollive- CcminerTpruvot Blakecoin 9,31 GH/s 0,00082 0,00009 zpoollive- CcminerSp-mod C11 30,14 MH/s 0,00081 0,02682 zpoollive- CcminerKlaust NeoScrypt 2,38 MH/s 0,00081 0,33891 zpoollive- CcminerKlaust Lyra2RE2 71,67 MH/s 0,00078 0,01086 zpoollive-
|
|
|
|
kopija
|
|
August 24, 2017, 05:01:57 PM |
|
How exactly do you disable alexis? My 6 voucher rig just crashes constantly with it.
Just put # infront of algo in ccminerAlexis78.ps1 But first try removing/lowering the intensities. I read somewhere that Alexis has higher default intensities, more suited for 1070/1080/ti. Also "skunk" = " -i 26 -d $SelGPUCC" #Skunk in tpruvot miner could be too high for non-1080ti? Are the intensity changed in the bat file? Look in "miners" folder.
|
we are nothing but a smart contracts on a cosmic blockchain
|
|
|
nodice
Newbie
Offline
Activity: 4
Merit: 0
|
|
August 25, 2017, 12:49:47 AM |
|
Hey Everybody, brand new here. I was mining Ethereum on Linux with Claymore for a bit until the difficulty got up there. Now I have decided to use Nemos Miner. I would prefer Linux, but I found an old Windows 7 license key in a drawer and went on to install Nemos Miner. I like the idea of algorithm switching, so we'll see how it goes. I just have a couple of questions to see what your thoughts are.
One thing I have noticed is that sometimes Nemos Miner will only start 2 threads. All 5 GPUs are recognized by the OS. I have seen Nemos Miner run with 5 threads. It appears that when certain algos/miners launch, only 2 out of 5 threads are running. This is of course a big concern, since any gain in mining profits using algos would be more than lost. The only pattern I have seen so far is that it happens every time 'skein' is running. Is the solution to disable skein, or are others having this problem? I have 4 GTX 1070s and 1 1080.
My other major question is about the temperature control. Is the best way to control temperature with MSI afterburner (I have an MSI board). With Claymore miner, I controlled target GPU temperatures and shutoff temperatures at the command line. That was a nice feature. Since Nemos is running multiple miners, I am assuming controlling temperature becomes more difficult. Would temp targets have to be set in the miner powershell files, or is it best to handle it at the OS level in Windows? I have never been a gamer just a hardware guy, so GPU optimization is kind of new to me.
Anyways, thanks to Nemo for the project. If there is a Linux version I am missing, please let me know!
-Austin
|
|
|
|
|
dragonmike
|
|
August 25, 2017, 08:18:23 AM |
|
Hey Everybody, brand new here. I was mining Ethereum on Linux with Claymore for a bit until the difficulty got up there. Now I have decided to use Nemos Miner. I would prefer Linux, but I found an old Windows 7 license key in a drawer and went on to install Nemos Miner. I like the idea of algorithm switching, so we'll see how it goes. I just have a couple of questions to see what your thoughts are.
One thing I have noticed is that sometimes Nemos Miner will only start 2 threads. All 5 GPUs are recognized by the OS. I have seen Nemos Miner run with 5 threads. It appears that when certain algos/miners launch, only 2 out of 5 threads are running. This is of course a big concern, since any gain in mining profits using algos would be more than lost. The only pattern I have seen so far is that it happens every time 'skein' is running. Is the solution to disable skein, or are others having this problem? I have 4 GTX 1070s and 1 1080.
ccminer-Alexis is the culprit here, not the algo. It sometimes takes a long time to start all threads. Sometimes several minutes... which indeed is annoying. You could disable Alexis alltogether and tell SPmod to mine Skein instead. It's a little bit slower though.
|
|
|
|
nodice
Newbie
Offline
Activity: 4
Merit: 0
|
|
August 25, 2017, 04:49:46 PM |
|
Thanks, I reviewed those threads and I am able to manage temperature a little better now. However, the values on the example images appear to have increased memory (you said to decrease memory when using ccminer). I used clock + 250 and memory + 650. Ccminer began to crash, so I reduced to memory +350. I am still seeing Ccminer crashes, so I will bump it down even more?
|
|
|
|
nodice
Newbie
Offline
Activity: 4
Merit: 0
|
|
August 25, 2017, 05:15:02 PM |
|
Hey Everybody, brand new here. I was mining Ethereum on Linux with Claymore for a bit until the difficulty got up there. Now I have decided to use Nemos Miner. I would prefer Linux, but I found an old Windows 7 license key in a drawer and went on to install Nemos Miner. I like the idea of algorithm switching, so we'll see how it goes. I just have a couple of questions to see what your thoughts are.
One thing I have noticed is that sometimes Nemos Miner will only start 2 threads. All 5 GPUs are recognized by the OS. I have seen Nemos Miner run with 5 threads. It appears that when certain algos/miners launch, only 2 out of 5 threads are running. This is of course a big concern, since any gain in mining profits using algos would be more than lost. The only pattern I have seen so far is that it happens every time 'skein' is running. Is the solution to disable skein, or are others having this problem? I have 4 GTX 1070s and 1 1080.
ccminer-Alexis is the culprit here, not the algo. It sometimes takes a long time to start all threads. Sometimes several minutes... which indeed is annoying. You could disable Alexis alltogether and tell SPmod to mine Skein instead. It's a little bit slower though. I did see it happen with Alexis, but I have been watching as much as possible, and I have seen the same issue on Tpruvot. Since Nemos miner is regularly relaunching miners, what I am seeing is that it will run all the threads immediately or it won't. It doesn't appear to start mining all threads after several minutes; it will only do it when it switches to a miner that runs all threads. It appears to be running half the cards half of the time. I also do not see a way to disable the miner. I see where algos can be disabled. Where do you disable a miner? Should I reset Nemo benchmark settings after making changes to GPU settings?
|
|
|
|
|