carlcapone
Newbie
Offline
Activity: 36
Merit: 0
|
|
December 29, 2017, 12:06:14 PM |
|
@milsys, have you figured out why nemos is picking the 3rd or 4th algo instead of the profitable one? Seems to be in ahashpool24hr only. I switched back to zpool and it's working fine.
|
|
|
|
Mike011
|
|
December 29, 2017, 12:18:42 PM Last edit: December 29, 2017, 12:30:03 PM by Mike011 |
|
I am having issues with neoscrypt benchmarking. I have two 1080 ti rigs and on one it just says failed, while on another rig says running, but not opening ccminer (klaust) at all... edit: i have added "-i 15" to neoscrypt in klaust powershell file - still the same
|
|
|
|
giraffe115
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 29, 2017, 01:49:56 PM |
|
Have you tried to right click and "Run as Administrator"?
Yes and when I do that I get another error: : The term '.\NemosMiner-v2.3.ps1' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. At line:1 char:2 + &.\NemosMiner-v2.3.ps1 -SelGPUDSTM '0' -SelGPUCC '0' -Currency EUR -P ... + ~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (.\NemosMiner-v2.3.ps1:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException
|
|
|
|
millsys
Member
Offline
Activity: 112
Merit: 10
|
|
December 29, 2017, 02:27:10 PM |
|
My 6 GPU Geforce GTX 1070ti are averaging $47 using X17 and Blake2S on ahashpool24hr, more profit than your pool with less cards
millsys thank you for the feedback. I just started to use the platform so we haven't found a final nesting ground. So you edited the bat file and removed all the Algorithms from it? For example, this is the OG bat files' algo setting: xevan,hsr,phi,tribus,c11,lbry,skein,timetravel,sib,bitcore,x17,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s,skunk You have modified it to this?: x17,blake2s and its not dishing out any faults, correct? Im going to try your suggested pool after I hit 24 hours @ MPH I'm wondering if the software can accommodate pool switching also. Can this be done? If so, this will kill everything else in the market. No, but I do remove timetravel/myriadgroestl..... If you have any errors/faults, edit these .ps1 files with (textpad is good) as follows: modify Ccmineralexis78.ps1 "sib" = " -i 19 -d $SelGPUCC" #Sib "x17" = " -i 19 -d $SelGPUCC" #X17 "c11" = " -i 19 -d $SelGPUCC" #C11 modify CcminerKlaust.ps1 "neoscrypt" = " -i 15 -d $SelGPUCC" #NeoScrypt After all benchmarks are ran, I prefer a 900 interval (edit in startahashpool24hr.bat), I see no need to be switching every 2 minutes, it takes 10-20 seconds to start hashing so I was losing too much in restarts.
|
FARM #1 : 60 GPUs spread across 6 rigs (1080ti/1080/1070ti/1070) FARM #2 : 72 GPUs spread across 12 rigs (1070ti x 6) FARM #3 : 16 GPUs spread across 4 rigs (1080ti x 4) AntMiner S9 13.5TH / AntMiner L3+ x 2
|
|
|
ZeroGee
Member
Offline
Activity: 92
Merit: 10
|
|
December 29, 2017, 03:53:57 PM |
|
My 6 GPU Geforce GTX 1070ti are averaging $47 using X17 and Blake2S on ahashpool24hr, more profit than your pool with less cards
millsys thank you for the feedback. I just started to use the platform so we haven't found a final nesting ground. So you edited the bat file and removed all the Algorithms from it? For example, this is the OG bat files' algo setting: xevan,hsr,phi,tribus,c11,lbry,skein,timetravel,sib,bitcore,x17,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s,skunk You have modified it to this?: x17,blake2s and its not dishing out any faults, correct? Im going to try your suggested pool after I hit 24 hours @ MPH I'm wondering if the software can accommodate pool switching also. Can this be done? If so, this will kill everything else in the market. No, but I do remove timetravel/myriadgroestl..... If you have any errors/faults, edit these .ps1 files with (textpad is good) as follows: modify Ccmineralexis78.ps1 "sib" = " -i 19 -d $SelGPUCC" #Sib "x17" = " -i 19 -d $SelGPUCC" #X17 "c11" = " -i 19 -d $SelGPUCC" #C11 modify CcminerKlaust.ps1 "neoscrypt" = " -i 15 -d $SelGPUCC" #NeoScrypt After all benchmarks are ran, I prefer a 900 interval (edit in startahashpool24hr.bat), I see no need to be switching every 2 minutes, it takes 10-20 seconds to start hashing so I was losing too much in restarts. I'm still having the issue where I can't really mine neoscrypt due to it going to 10% power usage, unless the mining window is on top. Would this fix this? It's only an issue on my Windows 7 rig, all .dlls installed, powershell 5, 388 drivers. 4x GTX 1070s, 64GB of DDR3 RAM. (Server board. )
|
|
|
|
millsys
Member
Offline
Activity: 112
Merit: 10
|
|
December 29, 2017, 04:47:23 PM |
|
My 6 GPU Geforce GTX 1070ti are averaging $47 using X17 and Blake2S on ahashpool24hr, more profit than your pool with less cards
millsys thank you for the feedback. I just started to use the platform so we haven't found a final nesting ground. So you edited the bat file and removed all the Algorithms from it? For example, this is the OG bat files' algo setting: xevan,hsr,phi,tribus,c11,lbry,skein,timetravel,sib,bitcore,x17,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s,skunk You have modified it to this?: x17,blake2s and its not dishing out any faults, correct? Im going to try your suggested pool after I hit 24 hours @ MPH I'm wondering if the software can accommodate pool switching also. Can this be done? If so, this will kill everything else in the market. No, but I do remove timetravel/myriadgroestl..... If you have any errors/faults, edit these .ps1 files with (textpad is good) as follows: modify Ccmineralexis78.ps1 "sib" = " -i 19 -d $SelGPUCC" #Sib "x17" = " -i 19 -d $SelGPUCC" #X17 "c11" = " -i 19 -d $SelGPUCC" #C11 modify CcminerKlaust.ps1 "neoscrypt" = " -i 15 -d $SelGPUCC" #NeoScrypt After all benchmarks are ran, I prefer a 900 interval (edit in startahashpool24hr.bat), I see no need to be switching every 2 minutes, it takes 10-20 seconds to start hashing so I was losing too much in restarts. I'm still having the issue where I can't really mine neoscrypt due to it going to 10% power usage, unless the mining window is on top. Would this fix this? It's only an issue on my Windows 7 rig, all .dlls installed, powershell 5, 388 drivers. 4x GTX 1070s, 64GB of DDR3 RAM. (Server board. ) Upgrade to Windows 10 - http://www.microsoft.com/accessibility/windows10upgrade
|
FARM #1 : 60 GPUs spread across 6 rigs (1080ti/1080/1070ti/1070) FARM #2 : 72 GPUs spread across 12 rigs (1070ti x 6) FARM #3 : 16 GPUs spread across 4 rigs (1080ti x 4) AntMiner S9 13.5TH / AntMiner L3+ x 2
|
|
|
legendary13
Newbie
Offline
Activity: 29
Merit: 0
|
|
December 29, 2017, 06:00:33 PM |
|
Hi Nemo, thx for good work in new release! 1)Can u make if ccminer got error, close error window and restart miner again 2)Can u add support http://yiimp.eu/ ?
|
|
|
|
fireanimal
Newbie
Offline
Activity: 10
Merit: 0
|
|
December 29, 2017, 08:20:37 PM |
|
There seems to be an issue with Hashrate discrepancy between Mining Pool Hub and Nemosminer on the Lyra2z algo giving inaccurate mining rates for Zcoin. At default intensity nemosminer was reporting 32-3300 kh/s, I had changed intensity to 22 to increase hashrates, which were then 3500 kh/s, but after running for a few hours, MPH was reporting around 2200 kh/s. So therefor earnings per day were not correct. I have since change the intensity to 12, which lowers nemosminer to 2180 kh/s, and matches MPH hashrates.
Just wondering if anyone else has noticed this issue.
Hardware was 1080ti
|
|
|
|
shastaxc
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 29, 2017, 09:12:20 PM |
|
I had a couple of questions: 1) Is there a way to change the coin being mined? I understand we can add additional algos, but what about additional coins? I'm using miningpoolhub if it matters. For example, I see this software uses DSTM to mine equihash algo but it chooses to mine Zcoin. Any way to switch this to Zclassic instead? Or add both as an option for the benchmark to decide which is better?
2) Is there an option to delay start mining for individual GPUs? When mining on my rig, I have to start up scripts for each GPU separately, otherwise the burst amperage is too much for my PSU capacity. If I try to run all 5 GPUs in one script the PC crashes. If I run a separate script for each GPU and leave a couple seconds between starting each one, I have no power problems. From what I can tell, this is because of a burst in amperage when first starting up the script. This Nemo miner seems pretty robust. Is there an option built in to accommodate this already?
|
|
|
|
ZeroGee
Member
Offline
Activity: 92
Merit: 10
|
|
December 29, 2017, 09:33:09 PM |
|
I had a couple of questions: 1) Is there a way to change the coin being mined? I understand we can add additional algos, but what about additional coins? I'm using miningpoolhub if it matters. For example, I see this software uses DSTM to mine equihash algo but it chooses to mine Zcoin. Any way to switch this to Zclassic instead? Or add both as an option for the benchmark to decide which is better?
2) Is there an option to delay start mining for individual GPUs? When mining on my rig, I have to start up scripts for each GPU separately, otherwise the burst amperage is too much for my PSU capacity. If I try to run all 5 GPUs in one script the PC crashes. If I run a separate script for each GPU and leave a couple seconds between starting each one, I have no power problems. From what I can tell, this is because of a burst in amperage when first starting up the script. This Nemo miner seems pretty robust. Is there an option built in to accommodate this already?
I would look into a script to set card power to say, 50%, start script, wait for miners to kick in, and then adjust power to what you want it to. Just my 2 satoshi.
|
|
|
|
newgameos
Newbie
Offline
Activity: 13
Merit: 1
|
|
December 29, 2017, 09:46:03 PM |
|
I'm wondering if the software can accommodate pool switching also. Can this be done? If so, this will kill everything else in the market.
To elaborate on this more, what I meant was for the system to ping all the all the pools for the same coins and benchmark them. Doable? Or go fuck myself? Yes it can be done - and already is done it's called "sniffdog" and we might say it is nemosminer fork
|
|
|
|
Traz27
Newbie
Offline
Activity: 21
Merit: 0
|
|
December 29, 2017, 10:19:38 PM |
|
Have you tried to right click and "Run as Administrator"?
Yes and when I do that I get another error: : The term '.\NemosMiner-v2.3.ps1' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. At line:1 char:2 + &.\NemosMiner-v2.3.ps1 -SelGPUDSTM '0' -SelGPUCC '0' -Currency EUR -P ... + ~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (.\NemosMiner-v2.3.ps1:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundExceptionYou probably have a bad value set in your bat file. recreate it and see what happens.
|
|
|
|
Traz27
Newbie
Offline
Activity: 21
Merit: 0
|
|
December 29, 2017, 10:27:18 PM |
|
I'm wondering if the software can accommodate pool switching also. Can this be done? If so, this will kill everything else in the market.
To elaborate on this more, what I meant was for the system to ping all the all the pools for the same coins and benchmark them. Doable? Or go fuck myself? Yes it can be done - and already is done it's called "sniffdog" and we might say it is nemosminer fork Have you tried it? Is it more profitable and stable compared to Nemosminer?
|
|
|
|
densm
Newbie
Offline
Activity: 28
Merit: 0
|
|
December 29, 2017, 11:56:10 PM |
|
2) Is there an option to delay start mining for individual GPUs?
I would try adding "Sleep 30" in the beginning of second .bat, "Sleep 60" to third, etc. So next gpu will start mining in 30 seconds after previous started
|
|
|
|
PcChip
|
|
December 30, 2017, 12:39:36 AM |
|
I am having issues with neoscrypt benchmarking. I have two 1080 ti rigs and on one it just says failed, while on another rig says running, but not opening ccminer (klaust) at all... edit: i have added "-i 15" to neoscrypt in klaust powershell file - still the same
remove the --api-remote from CcminerKlaust.ps1
|
Legacy signature from 2011: All rates with Phoenix 1.50 / PhatK 5850 - 400 MH/s | 5850 - 355 MH/s | 5830 - 310 MH/s | GTX570 - 115 MH/s | 5770 - 210 MH/s | 5770 - 200 MH/s
|
|
|
starrbuck
Newbie
Offline
Activity: 48
Merit: 0
|
|
December 30, 2017, 03:51:48 AM |
|
Have you tried to right click and "Run as Administrator"?
Yes and when I do that I get another error: : The term '.\NemosMiner-v2.3.ps1' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. At line:1 char:2 + &.\NemosMiner-v2.3.ps1 -SelGPUDSTM '0' -SelGPUCC '0' -Currency EUR -P ... + ~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (.\NemosMiner-v2.3.ps1:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundExceptionYou probably have a bad value set in your bat file. recreate it and see what happens. No, there is a problem with the bat file. I am not a Powershell expert, but for me it works if you specify the full path to NemosMiner-v2.3.ps1 and add a double-quote at the end: powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "& C:\Mining\NemosMiner\NemosMiner-v2.3.ps1 -SelGPUDSTM '0 1' -SelGPUCC '0,1' -Currency USD -Passwordcurrency BTC -interval 120 -Username nemo -Workername miningpoolhub -Location US -PoolName miningpoolhub -Type nvidia -Algorithm cryptonight,keccak,lyra2z,skein,equihash,groestl,MyriadGroestl,Lyra2RE2,neoscrypt -Donate 5"
|
|
|
|
jqti
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 30, 2017, 08:27:38 AM |
|
What is it that I am missing on the Failed Algos?
Speed Active Launched Command ----- ------ -------- ------- 0.00 PH/s 00 Days 00 Hours 03 Minutes Once Bin\NVIDIA-Alexis78\ccminer-alexis.exe -a lyra2v2 -o stratum+tcp://hub.miningpoolhub.com:17018 -u jqueen2017.0 -p x -d 0,0 0.00 PH/s 00 Days 00 Hours 03 Minutes Once Bin\NVIDIA-Alexis78\ccminer-alexis.exe -a myr-gr -o stratum+tcp://hub.miningpoolhub.com:17005 -u jqueen2017.0 -p x -d 0,0 0.00 PH/s 00 Days 00 Hours 03 Minutes Once Bin\NVIDIA-TPruvotx64\ccminer-x64.exe -a lyra2z -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:17025 -u jqueen2017.0 -p x -d 0,0 0.00 PH/s 00 Days 00 Hours 03 Minutes Once Bin\NVIDIA-Alexis78cuda9\ccminer_x86.exe -a keccak -o stratum+tcp://hub.miningpoolhub.com:17003 -u jqueen2017.0 -p x -d 0,0 -m 2 0.00 PH/s 00 Days 00 Hours 03 Minutes Once Bin\NVIDIA-CcminerKlaust\ccminer.exe -a neoscrypt -o stratum+tcp://hub.miningpoolhub.com:17012 -u jqueen2017.0 -p x -d 0,0
Status: Failed
Speed Active Launched Command ----- ------ -------- ------- 0.00 PH/s 00 Days 00 Hours 00 Minutes 2 Times Bin\NVIDIA-TPruvotx64\ccminer-x64.exe -a cryptonight -o stratum+tcp://us-east.cryptonight-hub.miningpoolhub.com:17024 -u jqueen2017.0 -p x -i 10 -d 0,0 0.00 PH/s 00 Days 00 Hours 00 Minutes 2 Times Bin\NVIDIA-DSTM\zm.exe --telemetry=127.0.0.1:2222 --server us-east.equihash-hub.miningpoolhub.com --port 17023 --user jqueen2017.0 --pass x -d 0 0
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
December 30, 2017, 08:30:34 AM Last edit: December 30, 2017, 08:57:46 AM by minerx117 |
|
I'm wondering if the software can accommodate pool switching also. Can this be done? If so, this will kill everything else in the market.
To elaborate on this more, what I meant was for the system to ping all the all the pools for the same coins and benchmark them. Doable? Or go fuck myself? its already done... i just don't see the point in enabling more than one pool... if you want to do it just edit start.bat change -PoolName ahashpool to eg. -PoolName ahashpool,zpool,miningpoolhub,hashrefinery i'll add start.bat that has all pools enabled to next release Best Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
giraffe115
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 30, 2017, 01:07:07 PM |
|
Have you tried to right click and "Run as Administrator"?
Yes and when I do that I get another error: : The term '.\NemosMiner-v2.3.ps1' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. At line:1 char:2 + &.\NemosMiner-v2.3.ps1 -SelGPUDSTM '0' -SelGPUCC '0' -Currency EUR -P ... + ~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (.\NemosMiner-v2.3.ps1:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundExceptionYou probably have a bad value set in your bat file. recreate it and see what happens. No, there is a problem with the bat file. I am not a Powershell expert, but for me it works if you specify the full path to NemosMiner-v2.3.ps1 and add a double-quote at the end: powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "& C:\Mining\NemosMiner\NemosMiner-v2.3.ps1 -SelGPUDSTM '0 1' -SelGPUCC '0,1' -Currency USD -Passwordcurrency BTC -interval 120 -Username nemo -Workername miningpoolhub -Location US -PoolName miningpoolhub -Type nvidia -Algorithm cryptonight,keccak,lyra2z,skein,equihash,groestl,MyriadGroestl,Lyra2RE2,neoscrypt -Donate 5" Thanks that solved the trick to run as admin but I still got this message even when running as admin: Downloading ccminerAlexis78.. Remove-Item : Cannot remove item D:\CRYPTO\NemosMiner-v2.3c-beta\Bin\ccminer-hsr-alexis-x86-cuda8\vcruntime140.dll: You do not have sufficient access rights to perform this operation. At D:\CRYPTO\NemosMiner-v2.3c-beta\Include.ps1:531 char:59 + ... Name_Old") {Remove-Item "$(Split-Path $Path)\$FolderName_Old" -Recurs ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : PermissionDenied: (vcruntime140.dll:FileInfo) [Remove-Item], IOException + FullyQualifiedErrorId : RemoveFileSystemItemUnAuthorizedAccess,Microsoft.PowerShell.Commands.RemoveItemCommand Remove-Item : Directory D:\CRYPTO\NemosMiner-v2.3c-beta\Bin\ccminer-hsr-alexis-x86-cuda8 cannot be removed because it is not empty. At D:\CRYPTO\NemosMiner-v2.3c-beta\Include.ps1:531 char:59 + ... Name_Old") {Remove-Item "$(Split-Path $Path)\$FolderName_Old" -Recurs ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : WriteError: (D:\CRYPTO\Nemos...lexis-x86-cuda8:DirectoryInfo) [Remove-Item], IOException + FullyQualifiedErrorId : DirectoryNotEmpty,Microsoft.PowerShell.Commands.RemoveItemCommand
Rename-Item : Access to the path 'D:\CRYPTO\NemosMiner-v2.3c-beta\Bin\ccminer-hsr-alexis-x86-cuda8' is denied. At D:\CRYPTO\NemosMiner-v2.3c-beta\Include.ps1:536 char:9 + Rename-Item "$(Split-Path $Path)\$FolderName_Old" "$FolderNam ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : WriteError: (D:\CRYPTO\Nemos...lexis-x86-cuda8:String) [Rename-Item], IOException + FullyQualifiedErrorId : RenameItemIOError,Microsoft.PowerShell.Commands.RenameItemCommand
|
|
|
|
aatefmasood
Newbie
Offline
Activity: 12
Merit: 0
|
|
December 30, 2017, 01:44:19 PM |
|
I am having problem with Nemosminer my is not auto switching and mining output almost zero. how to rectify
|
|
|
|
|