bughatti
|
|
March 17, 2017, 05:26:18 AM |
|
Hey yun, I posted that link in your thread also, tried all of the tricks, none of them worked, I haven't gotten a real answer out of any of them claiming it works, maybe someone trying to push sales, who knows.
|
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
bughatti
|
|
March 17, 2017, 05:46:54 AM |
|
Yeah, I think OP is either FULL of S@#$ or what not. Not sure why he post pictures of things that didn't need change to make a simple solution seem more complicated as well. I'm getting tire of this crap why they make Z10 LGA1151 MB so retarded. You need a supported CPU to flash the BIOS to support Celeron and that BIOS have been available for many months, why not sell the new MBs with that damn BIOS and save us the headache. Another half day of my life wasted. All the TB85 sold out so I have to find some other options.
Its not an everyday thing I do but I have ordered from AliExpress before, always that route. https://www.aliexpress.com/premium/Biostar-TB85-LGA-1150.html?ltype=wholesale&d=y&origin=y&isViewCP=y&catId=0&initiative_id=SB_20170316214318&SearchText=Biostar+TB85+LGA+1150&blanktest=0&tc=ppcI get my first tb85 in tomorrow I got from amazon to test out. My other 4 rigs are the msi z97 and the 1 z170a. Hopefully the tb85 will do good by me for a 6 card rig.
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
|
March 17, 2017, 06:18:33 AM |
|
Yeah, I think OP is either FULL of S@#$ or what not. Not sure why he post pictures of things that didn't need change to make a simple solution seem more complicated as well. I'm getting tire of this crap why they make Z10 LGA1151 MB so retarded. You need a supported CPU to flash the BIOS to support Celeron and that BIOS have been available for many months, why not sell the new MBs with that damn BIOS and save us the headache. Another half day of my life wasted. All the TB85 sold out so I have to find some other options.
i have minimum 50 tb85 available, who wants ? should reach USA within a week or less. let's see if OP is willing to offer some warehousing. sorry i've been bz with couple of ongoing projects.
|
|
|
|
yun9999 (OP)
|
|
March 17, 2017, 06:57:45 AM |
|
I would be happy to help warehouse this deal to help our members at no additional cost other than what is required for me to ship out to you. Thanks YSYLUNG for the generous offer. Can you mention how much it would cost per MB here. For all those interested please PM me rather than flood this thread.
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
|
March 17, 2017, 08:23:00 AM |
|
I would be happy to help warehouse this deal to help our members at no additional cost other than what is required for me to ship out to you. Thanks YSYLUNG for the generous offer. Can you mention how much it would cost per MB here. For all those interested please PM me rather than flood this thread.
ok, i will get further info, i will try to get lowest possible price with a bulk order including mine, so everyone can PM OP & i will be in touch too. it's friday over here & close to after working hours, i will update ASAP including S&H so that i can come out with a final pricing. those who are keen, please do let OP know so i can figure out shipping charges easier. warranty is 3 years. not sure if it's international covered or not but if you ship it back to me, i will help you to process it but so far i've used over 40 tb85's non have failed on me yet. this is an official product from official distributor, not those illegal ones that are not able to claim warranty if there's any issues. ok i better stop "advertising" but do keep OP updated & i can work on my side. this is for the community !!!
|
|
|
|
yun9999 (OP)
|
|
March 17, 2017, 08:34:08 AM Last edit: March 17, 2017, 09:03:10 AM by yun9999 |
|
I agree these TB85 are very good. Plug and Play MB for both Windows and Simple OS. No stress easy 6 GPU guaranteed. Newegg was selling them for $69.99 before they were sold out and with this Frenzy I'm sure it will be a while before it's back in stock and H81 are hard to get so these are your closest bet other than much pricier MBs. I will handle this on a first come first serve but will try to give higher priorities to larger order as those are easier to handle than tons of single transactions so if you're trying to get some maybe load up extra for future or for another friend. Thanks again YSYLUNG, you're doing everyone a huge favor. Quoting to reduce post. yslyung are you from Europe? There are people interested in tb85 here too.
YSYLUNG is from Asia.
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
|
March 17, 2017, 10:15:25 AM |
|
I agree these TB85 are very good. Plug and Play MB for both Windows and Simple OS. No stress easy 6 GPU guaranteed. Newegg was selling them for $69.99 before they were sold out and with this Frenzy I'm sure it will be a while before it's back in stock and H81 are hard to get so these are your closest bet other than much pricier MBs. I will handle this on a first come first serve but will try to give higher priorities to larger order as those are easier to handle than tons of single transactions so if you're trying to get some maybe load up extra for future or for another friend. Thanks again YSYLUNG, you're doing everyone a huge favor. Quoting to reduce post. yslyung are you from Europe? There are people interested in tb85 here too.
YSYLUNG is from Asia. YSL YUNG ... aka captminer atm, shipping to ASIA, USA & UK is not an issue but to other parts of EU could be an issue. I'll double check with my shipping agency.
|
|
|
|
dagarair
|
|
March 17, 2017, 10:45:46 AM |
|
So i got oncor to drop a pole on the street closest to my meter. They will drop pole add transformer and run 500 amp service to my base for free! all i have to provide now is a 40 ft long trench and PVC. Woot.
Closest pole to me is 150 feet right now. Man i got pucky i saw a 5k bill just in trenching and repair work of concrete and crap running it 150 ft through 2 driveways.
|
|
|
|
yun9999 (OP)
|
|
March 17, 2017, 01:13:22 PM |
|
@dagair - Congrats. I'm not sure how they're going to run 500 AMPs to you though, it's usually in 200 amp wires as it wouldn't make sense to run the 150 wires and the commercial Copper wires for 400 AMPs would be too cost prohibitive nor would most residential transformer have the proper hook up for it. Just follow all the code with extra lengths, etc. Else it will end up costing you a lot more to redo it. ***************POPPING CHAMPAGNEs..........Let's PARTY!!!!!!!!!!!!*************************** Let's SHOW OFF OUR MONEY MAKERS!!! I'll start off with my DENSE RACK. On top is my MONEY MAKER FURIES printing machine printing over $500/month per rig right now. Below it, is the packed like SARDINES but always HAPPY like a CLAM and never too hot MSI 470 with TWIN FROZR cooling. Ok some MSI 480s mixed in there but they suck, hashing same or little less but hotter. People laughed at me when I went big and all in on the 470s. They said who would want those cheap P.O.S. Well they been Printing good money since Sept and uses way less power than the 480, less heat and consistently pumping 27MH vs YMMV non ref 480s 24-29. With the exception of my favorite original Ref 480s of course. New Ref 480 sucks. Side view of my $EXY MONEY Printing Machine. $exine$$!!!!!!!
|
|
|
|
dagarair
|
|
March 17, 2017, 01:32:36 PM |
|
@dagair - Congrats. I'm not sure how they're going to run 500 AMPs to you though, it's usually in 200 amp wires as it wouldn't make sense to run the 150 wires and the commercial Copper wires for 400 AMPs would be too cost prohibitive nor would most residential transformer have the proper hook up for it. Just follow all the code with extra lengths, etc. Else it will end up costing you a lot more to redo it.
They are adding a pole near me and I have to trench to them with a 5 inch sch 40 pvc pipe. They (oncor the power fooks) will run 500kcmil cable to my meter =)
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
|
March 17, 2017, 01:50:03 PM |
|
OP, the riser is not straight on the nitro .... might be a little "off-topic" though but i'd like to REMIND all miners SAFETY FIRST ! 1 of my buddy had some sort of explosion on his mobo. investigation is still ongoing. although it blew up, the cpu fan is still turning, USB ports are still providing power & LAN port still have blinking LED's. using metal vs wood rack/base, in this case, metal wins. even the soldered components melted the owner was lucky, he was nearby & nothing else damaged besides the mobo
|
|
|
|
dagarair
|
|
March 17, 2017, 01:59:38 PM Last edit: March 17, 2017, 02:36:24 PM by dagarair |
|
H61? weird all I have is H81
Is that just an older chipset because that looks exactly like R1 of H81 board
|
|
|
|
cavaliersrus
|
|
March 17, 2017, 02:24:42 PM |
|
i do beleave the board is stright on the video card if you notice the pins on the card are firmly seated in place ... the usb connector on the riser board i do beleave goes at an angle
|
|
|
|
deadsix
|
|
March 17, 2017, 02:50:01 PM |
|
H61? weird all I have is H81
Is that just an older chipset because that looks exactly like R1 of H81 board
Yes, the H61 was the first True BTC board built by Asrock. Then came the H81.
|
|
|
|
yun9999 (OP)
|
|
March 17, 2017, 02:59:40 PM |
|
@YSLYUNG - Ouch, he must be using a Samsung Notes 7 while mining!
That's the O.G design. The new one moves the resting bar closely so the riser sits on top of it and also keeps the rubber piece from falling off or into the CPU. That's just my ROM flashing station so I didn't care to fix it, hence why you see 6 Furies on a 7 GPU MSI Gaming. I run Furies with only 6 GPU H81. Surprise no one is complaining about the heavy Pollen on top. MUAHAHAHAHA, stop nit picking my $EXY Printing station. As long as it's printing MONEY, it's $EXY, we should overlook all of it's FLAWs.
Show your $EXY Print stations!!!
|
|
|
|
bughatti
|
|
March 17, 2017, 03:11:53 PM |
|
Show your $EXY Print stations!!! [/quote] Still a work in progress, I have cleaned it up a bit and am now using my 220 circuit I installed. Also swapped out the storm window fan to a 2400cfm exhaust fan Also cleaned up the bottom rack in prep for 4 more rigs
|
|
|
|
yun9999 (OP)
|
|
March 17, 2017, 03:44:43 PM Last edit: March 17, 2017, 04:10:52 PM by yun9999 |
|
@Bhugatti - I like the LED lights! Looks cool. Exhaust fan is perfect location too. ***********IMPORTANCE of Proper Installation***************** WARNING!!!! SERIOUS JAMMING may occur with bad installations for our MONEY MAKER Printers. Now that you've been warned. Show us your $EXY Money Makers.
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
March 17, 2017, 04:22:12 PM |
|
Very SEXY rigs yun9999 --- you need use 100 dollar bills in your next pix for maximum impact.
I am embarrassed to show off my rigs because its very very messy however I am very very pleased with the daily income.
I have only 33 rigs and 25GHs X11 farm......
Funny that 70% of the daily income is delivered by X11 farm powered with only 5 x PSUs (2x1300,3x1600)...
while.... GPU rigs 33 x PSUs (EVGA-G2-1000/1300/1600) delivers 30% of the total daily income --- WTF!!!
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
yun9999 (OP)
|
|
March 17, 2017, 07:21:20 PM Last edit: March 17, 2017, 07:50:02 PM by yun9999 |
|
Sorry my GPU Money Makers are like regular ATMs, they only send out 20s. I don't have BAIKAL miners, those are the Casino ATMs that do the big 100s!!!! Haha, wish I was able to get in on the group for that. Those Baikal miners are making a killing!!! I'm always a Day Short and many Dollars behind.
|
|
|
|
Marvell1
Legendary
Offline
Activity: 2394
Merit: 1102
Leading Crypto Sports Betting & Casino Platform
|
|
March 17, 2017, 10:20:52 PM |
|
@yun9999 how are you furies making so much money, i have around 30 nanos in six rigs and dual mining eth at 27 mhs and dcr at 800 mhs they dont make close to 500 per rig
also does finsky have a bundle for sale on the 4k PSU bundle and picos and power for sale yet ? I just got 5 1200 watt PSU's back from RMA but I would probbaly sell them if i could get
a neater safer way to powr my boards
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
|