1080Ti Specific - Best mining option

[NameTaken]

The most profitable mining for 1080 ti now is Skunk Nicehash paying minimum $5/day

5 a day per card?

5 USD = 4,25425106 EUR...

I'm doing 6+ eur at hashrefinery. Skein and Nist 5.

Edited: Oh yeah, 6 EUR = 7.05177 USD

https://www.youtube.com/watch?v=IdtKbq3Omkw

Congratulations, from now on I will stop helping others on this forum. You're to blame.
You just made my ignore list.

Here's a final one. Eat your heart out. Grab a napkin homie, you just got served.

Been mining on hashrefinery.com for half a day now and the profit have been no where near 0.0018 BTC/GH.

[konqueror]

   2017-08-15 14:51:40                  0.0102 ZEC   Confirmed
8   2017-08-15 00:43:50                  0.0106 ZEC   Confirmed
7   2017-08-14 14:10:30                  0.0102 ZEC        Confirmed


Anyone care to do the math? lol this is what 1x1080ti is earning = basically $2.10 a day if I convert them right now.

I may be doing something horribly wrong lol


Mining ZEC using 0.3.4b ZecMiner

speed average is 700 sol
TDP 90%
Runs at 1835 mhz

Use flypool, currently paying 3.8~4 per 1080Ti

Their website has a warning- that we are having issues with paying out Zcash -so don't mine with those. Ergo, i can't use that website

Because of performance issues with the Zcash client we are unable to send payout transactions to z addresses! Therefore DO NOT use z addresses to mine on the pool.

If you have t address you will not have problems.

[kwertyzar]

The script modification ro show the eur/day was done by Fromage, the owner. Thats what you meant, right?

Some nice information. Thanks for that.

[elf_ua]

The most profitable mining for 1080 ti now is Skunk Nicehash paying minimum $5/day

5 a day per card?

5 USD = 4,25425106 EUR...

I'm doing 6+ eur at hashrefinery. Skein and Nist 5.

Edited: Oh yeah, 6 EUR = 7.05177 USD

Congratulations, from now on I will stop helping others on this forum. You're to blame.
You just made my ignore list.

Here's a final one. Eat your heart out. Grab a napkin homie, you just got served.

Thanks a lot man! I really appreciate your help. Setup my 1080ti rig for nist5/skein.

[Daywalker22]

How would you mine with a small minning farm?

I build a mining farm with 10 Rigs. 1 Rig has 8x 1080TI.
But i'm still not sure what's the best way to mine.

Do you have any software, GUI or Miningsoftware you can recomend for this project?

Thanks

LOL sounds like maybe you should build 1 rig with a couple of cards if you are clueless about the software.  I love these bombastic posts from people claiming they $70,000 farms but need direction on the best coin to mine.

Not everything is about the best coin. When you have one rig, its easy to switch between the coins and pools. But when you have more rigs, you need something stable.
I think it takes a lot of time to scan the market every day and set all you rigs to new pools or coins.

Well yes, but then why not start out with 2 rigs so that you can figure it out?  But to answer your question, since I don't like to just critisize,  check this out:  https://github.com/Sniffdog/Sniffdogminer   It is optimized for the 1080ti and will benchmark 25 different algos then automine on whatever pool and algo is most profitable.  I currently use it on one rig with 2 1080s and 2 1060s.  Its pretty much designed so that you can set it and forget it.  There is also awesome miner:  http://www.awesomeminer.com/

Thank you very much.
I already checked out the nicehash miner. But i'm not sure if this is the best way. They have 3% fees, and sometimes the calculator of their website show's an incredible low profit (2,31/day USD yesterday). So i was looking for something else with auto. switch.
I will check out your links.

[oup59]

705 Mh/s mining skein on hashrefinery, 3.11$/day so im sticking with Expanse (3.52$/day)

Which miner and gpu settings do you use for EXP mining?
I used to mine DGB and SIGT and looking for an alternative for 1080Ti rig.

[allcryptominer]

I just started mining skein algo at hashrefinery. Will report back after 24 hours.

[universalresonance]

   2017-08-15 14:51:40                  0.0102 ZEC   Confirmed
8   2017-08-15 00:43:50                  0.0106 ZEC   Confirmed
7   2017-08-14 14:10:30                  0.0102 ZEC        Confirmed


Anyone care to do the math? lol this is what 1x1080ti is earning = basically $2.10 a day if I convert them right now.

I may be doing something horribly wrong lol


Mining ZEC using 0.3.4b ZecMiner

speed average is 700 sol
TDP 90%
Runs at 1835 mhz

Use flypool, currently paying 3.8~4 per 1080Ti

Their website has a warning- that we are having issues with paying out Zcash -so don't mine with those. Ergo, i can't use that website

Because of performance issues with the Zcash client we are unable to send payout transactions to z addresses! Therefore DO NOT use z addresses to mine on the pool.

If you have t address you will not have problems.

"t" address? as in the one that starts with a "T" for Zec ?

yeah that's exactly how my address starts t1Jrr3wf7AmY5v92hwxMcvxc81nF9951Uai    for zec

Wow I'm such a noob. OK I'll switch over now. I'm very close to payout on nanopool then i'll switch over.

THanks

[Zean]

How can skein hash be 1000?
my 1080ti is 600...

[woarang]

Depending on miner and Clock Settings.
I am getting around 850-900 with 1750 mhz and 0.8V Settings in Afterburner using alexis miner for skein

[JWT]

The most profitable mining for 1080 ti now is Skunk Nicehash paying minimum $5/day

5 a day per card?

5 USD = 4,25425106 EUR...

I'm doing 6+ eur at hashrefinery. Skein and Nist 5.

Edited: Oh yeah, 6 EUR = 7.05177 USD

Can you tell what miner do you use?

[KaydenC]

The most profitable mining for 1080 ti now is Skunk Nicehash paying minimum $5/day

5 a day per card?

5 USD = 4,25425106 EUR...

I'm doing 6+ eur at hashrefinery. Skein and Nist 5.

Edited: Oh yeah, 6 EUR = 7.05177 USD

Can you tell what miner do you use?

He is using nicehash's miner, they added Skunk recently. However that profit is gone with the recent SIGT crash.

SIGT difficulty actually dropped a ton. Roughly the same profit as Zec, $3.5/day

[elf_ua]

I just started mining skein algo at hashrefinery. Will report back after 24 hours.

I put in bat files all algos which ccminer knows. Now it autoswitched to neoscrypt. Will report later about profitability later

UPDATE after 6 hours of mining, calculations shows that in 24h I will earn 3.2$ per card  Will remove neoscrypt from the bat file and see the result

[Fromage]

Been away for a bit but just to let everyone know latest update has tpruvot 2.2

I read some were asking about Nemos and mine... they pretty much run the same... If Nemo added hash then they would be the same

I still use Nemo 1.7.3 for splitting rigs...

I havn't downloaded Nemos lately so I don't know if he added my currency monitor.....

Thanks to everyone who is trying out SniffDog! I was away and when I got back it was still there running. There was a few extra's to do's to make it really good...

My bios restart is set to auto in case of power outages...

Add a task schedule so that your miner restarts every 24 hours (I also run Win10 with updates with no problems)....

Add the startsniff.bat into startup....



 

[universalresonance]

Guys,


New nVidia- update seemingly has improved OC speeds and stability. It's running a bit cooler as well.

It could be just placebo however, I feel like sol/s has improved a tad bit.

I'm sorry I don't have concrete data but that's my "observation"

[Juniormkl]

Been away for a bit but just to let everyone know latest update has tpruvot 2.2

I read some were asking about Nemos and mine... they pretty much run the same... If Nemo added hash then they would be the same

I still use Nemo 1.7.3 for splitting rigs...

I havn't downloaded Nemos lately so I don't know if he added my currency monitor.....

Thanks to everyone who is trying out SniffDog! I was away and when I got back it was still there running. There was a few extra's to do's to make it really good...

My bios restart is set to auto in case of power outages...

Add a task schedule so that your miner restarts every 24 hours (I also run Win10 with updates with no problems)....

Add the startsniff.bat into startup....



 

I tried Sniff yesterday and liked it, but can you answer this question please:
Is there a command to put on .bat file to start multiple Gpus or just start ant it will recognize everything?

[moonstruck]

705 Mh/s mining skein on hashrefinery, 3.11$/day so im sticking with Expanse (3.52$/day)

Expanse on ethash? How can that even be profitable on a 1080TI/Nvidia for that matter?

Skein is currently $3.04/day, I'm mining ZCash @ $3,34.

[Fromage]

Been away for a bit but just to let everyone know latest update has tpruvot 2.2

I read some were asking about Nemos and mine... they pretty much run the same... If Nemo added hash then they would be the same

I still use Nemo 1.7.3 for splitting rigs...

I havn't downloaded Nemos lately so I don't know if he added my currency monitor.....

Thanks to everyone who is trying out SniffDog! I was away and when I got back it was still there running. There was a few extra's to do's to make it really good...

My bios restart is set to auto in case of power outages...

Add a task schedule so that your miner restarts every 24 hours (I also run Win10 with updates with no problems)....

Add the startsniff.bat into startup....



 

I tried Sniff yesterday and liked it, but can you answer this wuestion please:
Is there a command to put on .bat file to start multiple Gpus or just start ant it will recognize everything?

Sniffdog runs all cards on your rig.... you can verify when the miner begins to run....

At this time the startsniff.bat fill DOES NOT have number of GPU to split your rig...

Reason... is because the API is only monitoring the default port so if you have two Sniffdog's going... the second... will bounce to the next port and your api reading will mess up your benching.

This is why I still use Nemo 1.7.3 to split rig because the hashrates are hard coded in the password as profitability so when port jumps... it won't affect it

Edit: 1.7.3 is for zpool and hash split rig mining only

[universalresonance]

Been away for a bit but just to let everyone know latest update has tpruvot 2.2

I read some were asking about Nemos and mine... they pretty much run the same... If Nemo added hash then they would be the same

I still use Nemo 1.7.3 for splitting rigs...

I havn't downloaded Nemos lately so I don't know if he added my currency monitor.....

Thanks to everyone who is trying out SniffDog! I was away and when I got back it was still there running. There was a few extra's to do's to make it really good...

My bios restart is set to auto in case of power outages...

Add a task schedule so that your miner restarts every 24 hours (I also run Win10 with updates with no problems)....

Add the startsniff.bat into startup....



 

I tried Sniff yesterday and liked it, but can you answer this wuestion please:
Is there a command to put on .bat file to start multiple Gpus or just start ant it will recognize everything?

Sniffdog runs all cards on your rig.... you can verify when the miner begins to run....

At this time the startsniff.bat fill DOES NOT have number of GPU to split your rig...

Reason... is because the API is only monitoring the default port so if you have two Sniffdog's going... the second... will bounce to the next port and your api reading will mess up your benching.

This is why I still use Nemo 1.7.3 to split rig because the hashrates are hard coded in the password as profitability so when port jumps... it won't affect it

Edit: 1.7.3 is for zpool and hash split rig mining only

So sniffminer- is just like Nemo ?- as in converts automatically everything into BTC and deposits -? any other things that differentiate both?

[Leass]

Sniff is optimized for 1080ti that's only difference I think. Can I disable one guy from mining by -cdri number in Sniff bat? Can't test it right now, but want to split rig for btc auto convert and strict nist5/skein mining to check differences.