|
lashatatu
|
 |
October 30, 2017, 06:55:41 PM |
|
Anybody knows how many D3 is out there, and how many of them is coming in November? aprox...
currently around 30k online and in november around 100-110k units will be online total, with current 30k with difficulty 50-55mil 75K units where sold for November? there is 7 batches in november including early november batch 1-15. so far every batch is around 10k so it's 70k probably |
|
|
|
|
sidzkosic
Newbie
 Offline
Activity: 74
Merit: 0
|
|
October 30, 2017, 08:01:03 PM |
|
Does anybody know how much Mhz is default frequency for Antminer D3 19.3 Ghz. I got it down to 500 Mhz but I wiuld like to try something higher but not to overclock.
|
|
|
|
|
nexus2017
Member
Offline
Activity: 106
Merit: 10
|
|
October 30, 2017, 08:13:43 PM |
|
Anybody knows how many D3 is out there, and how many of them is coming in November? aprox...
currently around 30k online and in november around 100-110k units will be online total, with current 30k with difficulty 50-55mil 75K units where sold for November? there is 7 batches in november including early november batch 1-15. so far every batch is around 10k so it's 70k probably Any idea o how many L3+ is out? If there are less L3+, then D3, I am 100% sure, this D3 is only produced to screw iBlink, A5, inso... |
|
|
|
|
|
cioloxl
|
|
October 30, 2017, 08:20:27 PM |
|
Anybody knows how many D3 is out there, and how many of them is coming in November? aprox...
currently around 30k online and in november around 100-110k units will be online total, with current 30k with difficulty 50-55mil ahahahha 55 mil. First of all you have no idea how many they sold. And second of all they are not stupid. They will never sell something that will not make money. Are you that dense? Don't you realize that going for profits on the short term will handicap them in the future? These are products for a very very niche market. They have factored in the difficulty increase. https://bitinfocharts.com/comparison/dash-difficulty.html#3m |
|
|
|
|
|
Bombardier
|
|
October 30, 2017, 08:27:29 PM |
|
good point. no one knows exactly how many bitmain sold. just pure speculation...
|
|
|
|
|
|
lashatatu
|
|
October 30, 2017, 08:44:19 PM |
|
Anybody knows how many D3 is out there, and how many of them is coming in November? aprox...
currently around 30k online and in november around 100-110k units will be online total, with current 30k with difficulty 50-55mil ahahahha 55 mil. First of all you have no idea how many they sold. And second of all they are not stupid. They will never sell something that will not make money. Are you that dense? Don't you realize that going for profits on the short term will handicap them in the future? These are products for a very very niche market. They have factored in the difficulty increase. https://bitinfocharts.com/comparison/dash-difficulty.html#3mjust check this whole tread and u will see numbers, there was a way to see how many units they had left during sales, i think that kind of talk on this tread was on page 50 to page 140 check that section  and u will see |
|
|
|
|
|
lashatatu
|
|
October 30, 2017, 08:46:48 PM |
|
Anybody knows how many D3 is out there, and how many of them is coming in November? aprox...
currently around 30k online and in november around 100-110k units will be online total, with current 30k with difficulty 50-55mil 75K units where sold for November? there is 7 batches in november including early november batch 1-15. so far every batch is around 10k so it's 70k probably Any idea o how many L3+ is out? If there are less L3+, then D3, I am 100% sure, this D3 is only produced to screw iBlink, A5, inso... no idea about l3+ didnt followed it closely, but they did screw iblink and innosilicon. |
|
|
|
|
Albortz
Sr. Member
Offline
Activity: 420
Merit: 250
Tax Attorney - Investor - Entrepreneur
|
|
October 30, 2017, 09:12:52 PM |
|
Anybody knows how many D3 is out there, and how many of them is coming in November? aprox...
currently around 30k online and in november around 100-110k units will be online total, with current 30k with difficulty 50-55mil ahahahha 55 mil. First of all you have no idea how many they sold. And second of all they are not stupid. They will never sell something that will not make money. Are you that dense? Don't you realize that going for profits on the short term will handicap them in the future? These are products for a very very niche market. They have factored in the difficulty increase. https://bitinfocharts.com/comparison/dash-difficulty.html#3mjust check this whole tread and u will see numbers, there was a way to see how many units they had left during sales, i think that kind of talk on this tread was on page 50 to page 140 check that section and u will see Yeah we were able to see the remaining count, but like a lot of people said, all in between batches have been the scraps of the once before that did not get payed. But if i remember correctly it was 200-500 in the first two batches and after that the 10k batches were dropped |
|
|
|
|
lashatatu
|
|
October 30, 2017, 09:16:51 PM |
|
Anybody knows how many D3 is out there, and how many of them is coming in November? aprox...
currently around 30k online and in november around 100-110k units will be online total, with current 30k with difficulty 50-55mil ahahahha 55 mil. First of all you have no idea how many they sold. And second of all they are not stupid. They will never sell something that will not make money. Are you that dense? Don't you realize that going for profits on the short term will handicap them in the future? These are products for a very very niche market. They have factored in the difficulty increase. https://bitinfocharts.com/comparison/dash-difficulty.html#3mjust check this whole tread and u will see numbers, there was a way to see how many units they had left during sales, i think that kind of talk on this tread was on page 50 to page 140 check that section and u will see Yeah we were able to see the remaining count, but like a lot of people said, all in between batches have been the scraps of the once before that did not get payed. But if i remember correctly it was 200-500 in the first two batches and after that the 10k batches were dropped yeap we were speculating that it was 200-500 but didnt had numbers for that, i dont know but i think we assumed that because how fast it got sold out. but as it turned out 1 batch was 6k and batch 1.5 was 7k and october batch is 10k so far with those 1-15 nov batch units. numbers tell those quantities |
|
|
|
|
bodrumair
Newbie
Offline
Activity: 31
Merit: 0
|
|
October 30, 2017, 10:41:43 PM |
|
Anybody knows how many D3 is out there, and how many of them is coming in November? aprox...
currently around 30k online and in november around 100-110k units will be online total, with current 30k with difficulty 50-55mil 75K units where sold for November? there is 7 batches in november including early november batch 1-15. so far every batch is around 10k so it's 70k probably Any idea o how many L3+ is out? If there are less L3+, then D3, I am 100% sure, this D3 is only produced to screw iBlink, A5, inso... I agree with this idea. Bitmain used the customers (I mean They use us ) to f*ck the other companies. |
|
|
|
|
thunder.02dragon
Newbie
Offline
Activity: 28
Merit: 0
|
|
October 30, 2017, 11:07:46 PM |
|
Regardless how many they sold.. more the miners are in more the difficulty will sky rocket.. and less profit.  As Simple. |
|
|
|
|
akirasendo7
Newbie
Offline
Activity: 58
Merit: 0
|
|
October 30, 2017, 11:26:25 PM |
|
The Difficulty of dash spikes up after the news , most of the buyers try to get their hands on the miner,
but because of hording, some dont get their hands on d3, with the demand, price spikes up also
but the big downside is that miners have to wait for another months to be deliver or 2,
before they get thier hands on the device which promise to be profitable in just days
turns out to be like couple of months , and some are still waiting, im sure before the device
came, it will not be more profitable as they promise,
|
|
|
|
|
|
JohnDoe3490
|
|
October 30, 2017, 11:46:46 PM |
|
Regardless how many they sold.. more the miners are in more the difficulty will sky rocket.. and less profit. As Simple. Yes, so you have to buy more miners to compensate! |
|
|
|
|
|
BenRickert
|
|
October 31, 2017, 12:06:29 AM |
|
Does anybody know how much Mhz is default frequency for Antminer D3 19.3 Ghz. I got it down to 500 Mhz but I wiuld like to try something higher but not to overclock.
537 |
|
|
|
|
mikespax
|
|
October 31, 2017, 01:28:47 AM |
|
I still have 10 D3s arriving in nov if anyones trying to buy them..
|
Bitrated user: mikespax.
|
|
|
|
junforever
|
|
October 31, 2017, 03:03:28 AM
Last edit: October 31, 2017, 04:31:52 AM by junforever |
|
Hi everyone.... Which other coins do you mine with D3 without a problem? ... It looks like the ones that will receive the late november batch must search for a different options to survive
|
|
|
|
|
|
COINKING84
|
|
October 31, 2017, 04:02:22 AM |
|
Hi everyone.... Which other coins do you mine with D3 without a problem? ... It looks like the ones that will receive the late nobemver batch must search for a different options to survive
i have a plan but I'm not telling others, you need to be creative to make it i think. |
|
|
|
|
|
Chan8
|
|
October 31, 2017, 04:17:55 AM |
|
Hi everyone.... Which other coins do you mine with D3 without a problem? ... It looks like the ones that will receive the late nobemver batch must search for a different options to survive
i have a plan but I'm not telling others, you need to be creative to make it i think. Hmmm whats your master plan? Share it with us. Spread the love in the community dude. I wonder how creative you can be. Because from the sound of it, you sound lost also, "i think". Lol either way, i think we still a-ok with the d3. Hopefully it will pay itself off, even if its 8 months down the road. Still be a profitable miner, i hope. |
|
|
|
|
|
Trade_BTC
|
|
October 31, 2017, 05:47:59 AM |
|
Received some from November batch, both labeled 19.3 g/h but neither came clocked for that. Just to test I put the frequency up and had hundreds of HW errors within seconds. The 19.3 hashrate is some kind of twisted Bitmain joke. Firmware change had zero effect.
|
|
|
|
|
|
adamantasaurus
|
|
October 31, 2017, 05:54:33 AM |
|
Received some from November batch, both labeled 19.3 g/h but neither came clocked for that. Just to test I put the frequency up and had hundreds of HW errors within seconds. The 19.3 hashrate is some kind of twisted Bitmain joke. Firmware change had zero effect.
UHHHH... idk you gotta be spreading misinformation or something I'm looking at my miner on Nicehash right now and I'm getting 20.... sooo yea...  |
|
|
|
|
|
