Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3

[VoskCoin]

After 5 days of D3 mining, I noticed that sometimes one of boards just turn of (this happens on different D3 devices,not just one), temperatures are ok, boards temps are max 70-71-72-73C. After

If they are really that temp in C, they have probably melted into a puddle!

M

my boards run as hot at 81c O_O I have the same issue where every couple days the 3rd board will kick off and I have to restart the miner, it's happened twice now

Is that really possible??

Maybe I'm behind times.

M

check this out


/// you can see it in my antminer d3 review video
https://youtu.be/Wg1H1YOSW4E

or there's a screenshot pulled onto the blogpost of the bitmain antminer d3 review
http://voskcoin.com/official-bitmain-antminer-d3-review/

[1714292655]

1714292655

[1714292655]

1714292655

[1714292655]

1714292655

[Mr_Snipes]

We will see who win.

Interesting test indeed. What i see on zpool a lot is that it takes ages for some coin to mature according to the view.
I stopped mining to my BTC-address because of the fees a while ago and there are still some coins shown as immature for scrypt and x11.


A lot of other stuff like birthmark seems to take ages until it is ready for cash-out.

[Albortz]

We will see who win.

Interesting test indeed. What i see on zpool a lot is that it takes ages for some coin to mature according to the view.
I stopped mining to my BTC-address because of the fees a while ago and there are still some coins shown as immature for scrypt and x11.


A lot of other stuff like birthmark seems to take ages until it is ready for cash-out.

I had the same problem with my L3's.  I still after almost 12 days have coins stuck in maturing. That, the fact that they do not pay remotely as advertised and my loss of HR all turned me against using zpool in the future again.

I believe there are few people who actually make more money on zpool, but I have never been able to even beat litecoinpool.org and that is a lot lower than multi-pools already

[Dopert]

It seems that the airflow inside the asic is not balanced optimum. Board 1 is lowest temp and 3 highest temp. Maybe it helps keeping the side of hashboard 3 at the most coolest side of the rack. Or turn the asic on its side so hashboard 3 is below (at own risk offcourse).

[sil2222]

After 5 days of D3 mining, I noticed that sometimes one of boards just turn of (this happens on different D3 devices,not just one), temperatures are ok, boards temps are max 70-71-72-73C. After

If they are really that temp in C, they have probably melted into a puddle!

M

my boards run as hot at 81c O_O I have the same issue where every couple days the 3rd board will kick off and I have to restart the miner, it's happened twice now

Is that really possible??

Maybe I'm behind times.

M

check this out


/// you can see it in my antminer d3 review video
https://youtu.be/Wg1H1YOSW4E

or there's a screenshot pulled onto the blogpost of the bitmain antminer d3 review
http://voskcoin.com/official-bitmain-antminer-d3-review/

Your temps are too high. I found that the D3 has more HW errors running 70c+ and a card will stop hashing then miner has to be reset. To fix this problem I down clocked to 456m and fan at 70% results where 16000 mhs average almost 0 errors and stable hashing no resets needed anymore. I also found you can set miner to 80% fan speed and miner will stay cooler ,but loud. Factory default fan speed control sucks. see below


Factory settings: Frequency (default gh/s 17000) Fan speed: changes depending on temp (not great)

Optimal settings: Frequency (default gh/s 17000) Fan speed: 100% Miner runs cooler ,but very very loud

Medium  Settings: Frequency (default gh/s 17000) Fan speed: 80%  Miner runs cooler and somewhat loud less errors cooler temp.

Low     Settings: Frequency (456M    gh/s 16000) Fan speed: 70%  not too noisy very stable.

[bibyfok]

After 5 days of D3 mining, I noticed that sometimes one of boards just turn of (this happens on different D3 devices,not just one), temperatures are ok, boards temps are max 70-71-72-73C. After

If they are really that temp in C, they have probably melted into a puddle!

M

my boards run as hot at 81c O_O I have the same issue where every couple days the 3rd board will kick off and I have to restart the miner, it's happened twice now

Is that really possible??

Maybe I'm behind times.

M

check this out


/// you can see it in my antminer d3 review video
https://youtu.be/Wg1H1YOSW4E

or there's a screenshot pulled onto the blogpost of the bitmain antminer d3 review
http://voskcoin.com/official-bitmain-antminer-d3-review/

Your temps are too high. I found that the D3 has more HW errors running 70c+ and a card will stop hashing then miner has to be reset. To fix this problem I down clocked to 456m and fan at 70% results where 16000 mhs average almost 0 errors and stable hashing no resets needed anymore. I also found you can set miner to 80% fan speed and miner will stay cooler ,but loud. Factory default fan speed control sucks. see below


Factory settings: Frequency (default gh/s 17000) Fan speed: changes depending on temp (not great)

Optimal settings: Frequency (default gh/s 17000) Fan speed: 100% Miner runs cooler ,but very very loud

Medium  Settings: Frequency (default gh/s 17000) Fan speed: 80%  Miner runs cooler and somewhat loud less errors cooler temp.

Low     Settings: Frequency (456M    gh/s 16000) Fan speed: 70%  not too noisy very stable.

But you void your warranty as you are touching the frequency...

[Hellracer]

how does it look with overclocking ?? The temps are now already high at 80 degrees
20 GHs or 25 Ghs


what coins do you generate with your d3

[jeytora]

By the way, at the product page there is Antminer L3+ in the picture when you download it and look it closely.
I guess they don't have a prototype for the D3 yet or they just haven't took a picture of it yet.

[Albortz]

By the way, at the product page there is Antminer L3+ in the picture when you download it and look it closely.
I guess they don't have a prototype for the D3 yet or they just haven't took a picture of it yet.

what do you mean by prototype?  They already delivered the D3 to customers around the world 

[HagssFIN]

By the way, at the product page there is Antminer L3+ in the picture when you download it and look it closely.
I guess they don't have a prototype for the D3 yet or they just haven't took a picture of it yet.

Why are you spam posting my old post?

Don't deny it, I remember what I wrote.

[MistGold]

Hey guys i got an offer to buy d3 for 1623 with  14 days delivery do you think i get roi?

[polylogic]

the profits are dropping very quickly.

early sep i made around $20
now i make around $4

with 2000mh, my roi went to the moon without me ..
ah well, things can change quickly

[kamizake]

i ordered 2 d3 november 20-30 batch each costs 1800$
iam little bit worried that i cant get my roi 3600$
but i have free electricity what do you guys think about it?

In early December you will be making $15.00 - $20.00 per day. You'll be fine. Not the Money river so many were looking for but that was never real anyway unless you got the first ones. The only people who are gonna get Digitally raped by big square ASIC, are the morons that bought from resellers.

That's for both miners in total and considering the free electrocity

and the one other thing that remains unknown is dash price 
i already ordered so whats done is done i only hope that d3 units wont have any error

[bytiges]

Anyone knows where to find information about expected payout for finding a block, block time and other metrics needed to calculate dash expected mining earnigs based on hash rate ?

I would like to verify the numbers that online calculators give.

[shaninium]

If this continues dash should change its mining rewards. ~40 % block rewards go to miners, that's not enough and with a block halving in two years or so I'd hate to think what profits will be then unless dash skyrockets. Dash devs and master nodes get paid too well..

[Searing]

If this continues dash should change its mining rewards. ~40 % block rewards go to miners, that's not enough and with a block halving in two years or so I'd hate to think what profits will be then unless dash skyrockets. Dash devs and master nodes get paid too well..

that won't change the dev of dashcoin likely holds half the coins and i heard he has half the nodes....they won't change imho.

(should probably research this ..what I was told anyway about dash)

[shaninium]

If this continues dash should change its mining rewards. ~40 % block rewards go to miners, that's not enough and with a block halving in two years or so I'd hate to think what profits will be then unless dash skyrockets. Dash devs and master nodes get paid too well..

that won't change the dev of dashcoin likely holds half the coins and i heard he has half the nodes....they won't change imho.

(should probably research this ..what I was told anyway about dash)

That 10% dash budget is huge, every month they rake in millions to spend on salaries of a few employees and in developing dash. Only 30% of that goes to dash core. They are self funding unlike other coins. They won't change true just saying it would be nice if they did. Anything can change even if it has to fork. It's happened before.

https://www.dashforcenews.com/dash-monthly-budget-nears-1-million-30-goes-core/

[mdude77]

Hey guys i got an offer to buy d3 for 1623 with  14 days delivery do you think i get roi?

Make sure you use escrow.  Scammers are abundant here.

M

[bytiges]

Hey guys i got an offer to buy d3 for 1623 with  14 days delivery do you think i get roi?

By my own calculations, the current earnings, before expenses, is 86$/day. Do your math.
This is by doing the math on the block chain and not by using online calculators.

[generalt]

Hey guys i got an offer to buy d3 for 1623 with  14 days delivery do you think i get roi?

By my own calculations, the current earnings, before expenses, is 86$/day. Do your math.
This is by doing the math on the block chain and not by using online calculators.

Earnings are closer to $30 per day by my calculations.