[GUIDE][AMD][NVIDIA][CPU][XMR]How to Mine Monero/RYO + Miners Downloads 💲⛏

[lezartnono19]

Hello, I would like to have precision with XMRIG CNV2, because with my 280x 3G cards, I have lines "THREAD COMPUTE ERROR". Why?

[1611424938]

1611424938

[1611424938]

1611424938

[1611424938]

1611424938

[alizali]

i use xmr stack mining XHV
my card us rx 470 4GB elpida
my amdconfig is
"gpu_threads_conf" : [
  // gpu: Ellesmere memory:3711
  // compute units: 32
  { "index" : 0,
    "intensity" : 904, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 2,
    "unroll" : 8, "comp_mode" : true
  ],

my hashrate is 695

is it ok?

[alizali]

on another rig i have rx 580 4GB hynix
xmr stack mining XHV
config is
"gpu_threads_conf" : [
  // gpu: Ellesmere memory:3711
  // compute units: 36
  { "index" : 0,
    "intensity" : 952, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 2,
    "unroll" : 16, "comp_mode" : true
  },


i can not run daul thread i don not no what is wrong with my config

my hashrate is 735
is it ok?

[Mattthev]

on another rig i have rx 580 4GB hynix
xmr stack mining XHV
config is
"gpu_threads_conf" : [
  // gpu: Ellesmere memory:3711
  // compute units: 36
  { "index" : 0,
    "intensity" : 952, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 2,
    "unroll" : 16, "comp_mode" : true
  },


i can not run daul thread i don not no what is wrong with my config

my hashrate is 735
is it ok?

Have you tried these config?
https://mining-bios.eu/guides-and-miners/cryptonight-xmrryoxhvaeon-mining-guides-and-miners-configs/
Results depends on bios mod.

[alizali]

on another rig i have rx 580 4GB hynix
xmr stack mining XHV
config is
"gpu_threads_conf" : [
  // gpu: Ellesmere memory:3711
  // compute units: 36
  { "index" : 0,
    "intensity" : 952, "worksize" : 8,
    "affine_to_cpu" : false, "strided_index" : 2, "mem_chunk" : 2,
    "unroll" : 16, "comp_mode" : true
  },


i can not run daul thread i don not no what is wrong with my config

my hashrate is 735
is it ok?

Have you tried these config?
https://mining-bios.eu/guides-and-miners/cryptonight-xmrryoxhvaeon-mining-guides-and-miners-configs/
Results depends on bios mod.

just 396 for intensity? for 470
it will give me very low hashrate

[Mattthev]

just 396 for intensity? for 470
it will give me very low hashrate

I would say it is enough on 2 threads. I don't remember my exact settings on 4GB cards. You can always find yourself the best cofing.

[alizali]

just 396 for intensity? for 470
it will give me very low hashrate

I would say it is enough on 2 threads. I don't remember my exact settings on 4GB cards. You can always find yourself the best cofing.

generally is it correct this sentences or not?
1. intensity should be a multiply by worksize. for example if your worksize is 8 intensity should be 8,16,32,....,896,902,910,...

2. if we find best intensity for the a GPU if we use double thread we have to divided it by two. for example if you have one thread with 910 if you change it to 2 thread the intensity should be 455 for each card?

3. the fourmula for intensity is (GPUram/2)-128MB? 

[BillieCrypt]

After Monero V8 hardfork my R9 280 video cards showed a small hashrate and gave a lot of errors. I tried different miners and choosed XMR-STAK with Win7-64Bit-Radeon-Software-Adrenalin-Edition-18.5.1-May23 drivers. Now I have hashrate up to 500 hashes per second and there are no errors.

[Mr.merson]

Does anyone know the average hashrate of the r9 270x cards with the new algo cryptonight v8?

[minekheim]

Does anyone know the average hashrate of the r9 270x cards with the new algo cryptonight v8?

Hallo ich benutze die R9 270x im Rig mit 12 Stück. Mit Adrenalin 18.2.1 erhalte ich 312 Hs pro Karte. Ich werde die Tage mal den Treiber 17.6 versuchen . Mit dem alten PoW hatte ich 460-480 Hs

[herominers]

Example start.cmd for xmrig
NOTE: For GPU use xmrig-amd.exe or xmrig-nvidia.exe instead of xmrig.exe

   

@echo off
xmrig.exe --donate-level 1 -o tube.herominers.com:10281 -u YOUR_WALLET_ADDRESS -p YOUR_WORKER_NAME -a cryptonight-heavy --variant tube -k
pause

[Apprentice]

looking for little assistance.

trying to run XMRIG-proxy on a VPS and point my rigs to it (this is how it is supposed to work, no? not an expert here). But can't figure out how to make it work.

how should I configure the VPS config file and the miner's config file?

thanks!

[Apprentice]

looking for little assistance.

trying to run XMRIG-proxy on a VPS and point my rigs to it (this is how it is supposed to work, no? not an expert here). But can't figure out how to make it work.

how should I configure the VPS config file and the miner's config file?

thanks!

managed to got it working. but to see the worker's name/IM on the proxy? i can only see the IP address.
Need to know when a miner is down.
thanks.

[Mattthev]

looking for little assistance.

trying to run XMRIG-proxy on a VPS and point my rigs to it (this is how it is supposed to work, no? not an expert here). But can't figure out how to make it work.

how should I configure the VPS config file and the miner's config file?

thanks!

managed to got it working. but to see the worker's name/IM on the proxy? i can only see the IP address.
Need to know when a miner is down.
thanks.

Use wallet address as rig name and connect to the VPS. On XMRig proxy you will then see stats with the rig name after you hit W.

[Apprentice]

looking for little assistance.

trying to run XMRIG-proxy on a VPS and point my rigs to it (this is how it is supposed to work, no? not an expert here). But can't figure out how to make it work.

how should I configure the VPS config file and the miner's config file?

thanks!

managed to got it working. but to see the worker's name/IM on the proxy? i can only see the IP address.
Need to know when a miner is down.
thanks.

Use wallet address as rig name and connect to the VPS. On XMRig proxy you will then see stats with the rig name after you hit W.

great! thanks! it worked.
Is there a way to receive email notifications when a miner is down?

Another question: which mode should I use? simple? proxy?

[Mattthev]

great! thanks! it worked.
Is there a way to receive email notifications when a miner is down?

Another question: which mode should I use? simple? proxy?

XMRig proxy probably doesn't have this feature, but you need to look at the Github. You need something like Awesome Miner to monitor it.
It depends how many miners you have and what pool you use. Small pool and many miners = proxy. Big pool = whatever you prefer.

[Apprentice]

great! thanks! it worked.
Is there a way to receive email notifications when a miner is down?

Another question: which mode should I use? simple? proxy?

XMRig proxy probably doesn't have this feature, but you need to look at the Github. You need something like Awesome Miner to monitor it.
It depends how many miners you have and what pool you use. Small pool and many miners = proxy. Big pool = whatever you prefer.

is it recommended to use the proxy if I mainly mine with CPUs? like 20 i7/Xeon + 2 GPU mining rigs ?

[Mattthev]

great! thanks! it worked.
Is there a way to receive email notifications when a miner is down?

Another question: which mode should I use? simple? proxy?

XMRig proxy probably doesn't have this feature, but you need to look at the Github. You need something like Awesome Miner to monitor it.
It depends how many miners you have and what pool you use. Small pool and many miners = proxy. Big pool = whatever you prefer.

is it recommended to use the proxy if I mainly mine with CPUs? like 20 i7/Xeon + 2 GPU mining rigs ?

Not really, but it depends on the pool. If it allows you to mine to same address (if you mine to same wallet) without ban you it is completly fine. I don't know the pools limits, but I would say 20 at once is not a problem. Many pools have e-mail reports when your miner is down so you don't need any additional sw for that also.

[Apprentice]

great! thanks! it worked.
Is there a way to receive email notifications when a miner is down?

Another question: which mode should I use? simple? proxy?

XMRig proxy probably doesn't have this feature, but you need to look at the Github. You need something like Awesome Miner to monitor it.
It depends how many miners you have and what pool you use. Small pool and many miners = proxy. Big pool = whatever you prefer.

is it recommended to use the proxy if I mainly mine with CPUs? like 20 i7/Xeon + 2 GPU mining rigs ?

Not really, but it depends on the pool. If it allows you to mine to same address (if you mine to same wallet) without ban you it is completly fine. I don't know the pools limits, but I would say 20 at once is not a problem. Many pools have e-mail reports when your miner is down so you don't need any additional sw for that also.

alright.
well I have connected 11 miners to the proxy and what I have noticed is that the number of invalid share is so far 0.

[Mattthev]

alright.
well I have connected 11 miners to the proxy and what I have noticed is that the number of invalid share is so far 0.

The proxy won't create any rejected share or very rarely, the miners will do some always sooner or later.