Antminer D3 Blissz firmware (10/12 v1.12 update)

[Ubersonic]

let me know if you have new features I should add (beside new algo's, this is still in continuous research)

I would really like the ability to set a timed schedule to switch between two hash/power/fan configs.  That way I can have it tuned for silence when I'm home and when I'm at work it can be set it to switch to the best hash/watt setting.

Not sure if anyone else would be interested in this though.

[ruptan]

Hi guys, I have a law firm and I have already threatened BM, if we get together we can do a class action, if we decide all together my studio is available.

I think a lot of us are willing to do it. Class action seems like a very good idea.

[Ubersonic]

Hi guys, I have a law firm and I have already threatened BM, if we get together we can do a class action, if we decide all together my studio is available.

I think a lot of us are willing to do it. Class action seems like a very good idea.

Hate to break this to you but Bitmain is a Chinese company, China is know for many things one of them is being "not in the USA", you can't have a class action suit against a foreign company with no US base/presence because US courts have no jurisdiction in China, hell even if you fly over to China and start a regular suit the Chinese courts always side with Chinese companies when the plaintiffs are foreign (hence all the copyright/patent infringing knock offs there).

[Attie707]

My 4 D3 devices hash rate went down after the upgrade.

A reboot fixed it...

Thus REBOOT your D3 after the software upgrade!

[blissz]

My 4 D3 devices hash rate went down after the upgrade.

A reboot fixed it...

Thus REBOOT your D3 after the software upgrade!

Thanks for sharing in case someone else runs into this as well

[jakkuh]

Where do the "hardware errors" show up?

[blissz]

Where do the "hardware errors" show up?

Under miner status you have a column "HW" and you will see the count of each chain. Make sure to keep it low. 1 or 2 per minute per chain is the limit I would say. If you enable reboot on low hashrate detection you can try to see if it works for you as you have a few HW errors.

[blissz]

Blissz i suggest an option about HW errors.
Can you make it custom. Say i want to reboot only when i have 1000 errors in total or on a specific board

I will add it to the poll. Thanks for the suggestion

[hta]

Blissz i suggest an option about HW errors.
Can you make it custom. Say i want to reboot only when i have 1000 errors in total or on a specific board

I will add it to the poll. Thanks for the suggestion

Hi blissz,

AUTO REBOOT xxxxxxxxx did not work

[hta]

Blissz i suggest an option about HW errors.
Can you make it custom. Say i want to reboot only when i have 1000 errors in total or on a specific board

I will add it to the poll. Thanks for the suggestion

Hi blissz,

AUTO REBOOT xxxxxxxxx did not work

maybe because i used at my test old version: Antminer-D3-20171123_1-blissz.tar

[blissz]

Blissz i suggest an option about HW errors.
Can you make it custom. Say i want to reboot only when i have 1000 errors in total or on a specific board

I will add it to the poll. Thanks for the suggestion

Hi blissz,

AUTO REBOOT xxxxxxxxx did not work

I advice to upgrade.
It takes 2 minutes to kick in + you need to have auto reboot enabled in the advanced screen. A kernel log would be nice as well. Thanks

maybe because i used at my test old version: Antminer-D3-20171123_1-blissz.tar

[hta]

Blissz i suggest an option about HW errors.
Can you make it custom. Say i want to reboot only when i have 1000 errors in total or on a specific board

I will add it to the poll. Thanks for the suggestion

Hi blissz,

AUTO REBOOT xxxxxxxxx did not work

I advice to upgrade.
It takes 2 minutes to kick in + you need to have auto reboot enabled in the advanced screen. A kernel log would be nice as well. Thanks

maybe because i used at my test old version: Antminer-D3-20171123_1-blissz.tar

Yes, I have ticked it before (Automatic Reboot on low hashrate detection), but AUto reboot does not run, I leave the machine running at night and go to sleep, the morning wake up the error xxxxxxxxx....

[DragosD1]

Hi, Blissz, any clues why dev miner mines so much?
It's well over 10%, as you can see in 2 examples, 2 diff D3 miners.

https://drive.google.com/open?id=1vBN0xlS3M531SMYiX0xqn5B4pTcqKxdR
https://drive.google.com/open?id=1sYYO3MuhP-Q0KIzRw8OxA9E7-X_eXo2Z

[blissz]

Hi, Blissz, any clues why dev miner mines so much?
It's well over 10%, as you can see in 2 examples, 2 diff D3 miners.

https://drive.google.com/open?id=1vBN0xlS3M531SMYiX0xqn5B4pTcqKxdR
https://drive.google.com/open?id=1sYYO3MuhP-Q0KIzRw8OxA9E7-X_eXo2Z

Don't look at the shares count as it makes no sense. It's really 1.5% of the time. Check your kernel log for the proof

[deathless]

I think you did an awesome job with the firmware
And is there an offset for all the temps is that why they are all higher then they should be
cause its around -7c outside and its blowing cold air out of the D3


just had a question for everyone though is there an auto turn off or a minimal temp for the D3

https://i.imgur.com/0YojK9L.png

[blastar]

Blissz i suggest an option about HW errors.
Can you make it custom. Say i want to reboot only when i have 1000 errors in total or on a specific board

I will add it to the poll. Thanks for the suggestion

Hi blissz,

AUTO REBOOT xxxxxxxxx did not work


https://imgur.com/a/bcSo6

I advice to upgrade.
It takes 2 minutes to kick in + you need to have auto reboot enabled in the advanced screen. A kernel log would be nice as well. Thanks

maybe because i used at my test old version: Antminer-D3-20171123_1-blissz.tar

Yes, I have ticked it before (Automatic Reboot on low hashrate detection), but AUto reboot does not run, I leave the machine running at night and go to sleep, the morning wake up the error xxxxxxxxx....

The same here... auto-reboot didn't work with 1 chain showing xxxxxx (using the latest 23/11 version)

[heythorp]

Happy Thanksgiving everyone!

I have to say thankyou for all the responses and help.

I have gone back to using the bitmain firmware as I am able to modify it enough to get stable working enviornment.

As a former gamer and modifier I appreciate all the work done on this project. However, at this point I can't get behind it. It's not producing returns that require it.

Please, no desrespect to Blissz. I thank you/him for  his/your help. I would have been lost trying to get my machines up and running if it wasnt for his mod and this thread.

I'll defintely be sticking around to see the progress.

Thank you to all.


To follow up on my original post. I am now mining exclusively on nicehash. wasn't my first choice but its working and others aren't working.

[Renanxx1]

Thanks for the great work, for me it's being better to keep d3 off for now.

[deathless]

Happy Thanksgiving everyone!

I have to say thankyou for all the responses and help.

I have gone back to using the bitmain firmware as I am able to modify it enough to get stable working enviornment.

As a former gamer and modifier I appreciate all the work done on this project. However, at this point I can't get behind it. It's not producing returns that require it.

Please, no desrespect to Blissz. I thank you/him for  his/your help. I would have been lost trying to get my machines up and running if it wasnt for his mod and this thread.

I'll defintely be sticking around to see the progress.

Thank you to all.


To follow up on my original post. I am now mining exclusively on nicehash. wasn't my first choice but its working and others aren't working.

Have you tried zpool?

[cscheat]

Hi Blissz, thanks for the wonderful firmware.

I have 1 suggestion

Can you make target temperature for the chip?

Example

Hot Day, Chip temp is 75C / Fan speed 5000RPM
Cold Day, Chip temp is 75C / Fan speed 3000RPM

Meaning the temp will always stay 75C