Tranz (OP)
Legendary
 Offline
Activity: 1540
Merit: 1052
May the force bit with you.
|
 |
August 31, 2017, 02:25:29 AM |
|
Not sure what is quite up yet. All wallets should be at block
2017-08-31 00:51:21 SetBestChain: new best=13a32b329188aed1f56d height=5609925 trust=86985634388565 blocktrust=17255903 date=08/31/17 00:50:57
Cryptopia is on the correct chain.
chainz.cryptoid.info does not appear to be. I will contact them.
I will release version 1.5.5.5 here tonight or tomorrow that will disconnect bad clients. Pleas ensure you are at version least version 1.5.3+ or preferably at 1.5.5.4 (soon 1.5.5.5).
I will also update the block chain download on hobonickels.info so we can ensure everyone is on the correct chain, who maybe having trouble.
I'm guessing height is the latest block? So your saying 5609925 My client says, when I go to Network, then Current Block info I get: Last Block Number: 5605101 POW Diff: 0.234283 POW Mh/s: 0.545091 Hash-to-Coins pool has the HBN coin offline - I didn't notice (I mine HBN too). I know I checked it, at least a week ago. It says wallet is fine with connections. I wonder if they are on the wrong client and began to mine PoW and some of the other wallets jumped on that chain. The most current block right now is. SetBestChain: new best=cfde0008286d2ed7d3c5 height=5610188 trust=86990034241448 blocktrust=17473922 date=08/31/17 02:23:12 If you are not at least there right now, then you will have to update. The blockchain and new version are uploading now. Done in a few hours. |
|
|
|
|
|
|
|
|
|
|
|
|
"With e-currency based on cryptographic proof, without the need to
trust a third party middleman, money can be secure and transactions
effortless." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
|
|
Turrican
Member
Offline
Activity: 227
Merit: 26
“BitCloud [BTDX]”
|
|
August 31, 2017, 06:38:50 PM |
|
Good Job  2017-08-31 18:34:36 partner [2a01:4f8:202:7021::1806]:42221 using obsolete version 70007; disconnecting What is this ? : 2017-08-31 18:31:06 socket recv error 10054 2017-08-31 18:33:48 socket recv error 10053 |
|
|
|
|
Cryptorast
|
|
September 01, 2017, 03:15:46 PM |
|
When I try to set:
combinethreshold 9000
splitthreshold 9000
I have result
20:10:57

combinethreshold 9000
20:10:57
{
"amount" : 200.00000000
}
20:11:11
splitthreshold 9000
20:11:12
{
"amount" : 100.00000000
}
Version of HBN 1.5.5.5
How to set bigger number of combine?
|
|
|
|
|
screaming_trees
Newbie
Offline
Activity: 26
Merit: 0
|
|
September 01, 2017, 04:10:09 PM |
|
My wallet synced when I updated to the latest version days ago, but for the past few days it is still trying to sync after loading the wallet again it re-scans the blockchain, takes hours to do so.
The last block number 5610710
Last block time: Thu Aug 31 14:28:17 2017
|
|
|
|
|
|
2xjO9M3P
|
|
September 01, 2017, 04:12:29 PM |
|
When I try to set:
combinethreshold 9000
splitthreshold 9000
I have result
20:10:57

combinethreshold 9000
20:10:57
{
"amount" : 200.00000000
}
20:11:11
splitthreshold 9000
20:11:12
{
"amount" : 100.00000000
}
Version of HBN 1.5.5.5
How to set bigger number of combine?
Get more HBN. The threshold is limited by the total amount of coins you hold. The more coins => the higher threshold. |
|
|
|
|
|
dnp
|
|
September 02, 2017, 01:01:50 AM |
|
i presume combine/split threshold are involved with staking.
but is it that they actually do or affect?
what are the usual strategies for picking an optimal value?
|
Explorer and full node hosting at explorer.dognose.net
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1052
May the force bit with you.
|
|
September 02, 2017, 02:10:32 AM |
|
My wallet synced when I updated to the latest version days ago, but for the past few days it is still trying to sync after loading the wallet again it re-scans the blockchain, takes hours to do so.
The last block number 5610710
Last block time: Thu Aug 31 14:28:17 2017
Rescan can take time, depending on how deep it had to go. Shouldn't take to much time if you just sync'd a day or so ago. What does your debug say? After it is complete the catch up should be pretty quick. 2017-09-02 02:06:22 SetBestChain: new best=4422b58b8521fadb83fc height=5618484 trust=87133663234171 blocktrust=16821621 date=09/02/17 02:05:32 |
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1052
May the force bit with you.
|
|
September 02, 2017, 03:04:47 AM |
|
i presume combine/split threshold are involved with staking.
but is it that they actually do or affect?
what are the usual strategies for picking an optimal value?
Best for the network is lots of small blocks that keep the chain moving and each only have a small amount of weight, so as not to cause mass block flooding. Pre version 1.5.5.5 bigger block were more necessary because the wallet was very laggy with many blocks. But not I am running wallets with thousands of 5 or lower blocks and things are still staking nicely. It is all in your own taste. The only thing you want to avoid is creating HUGE blocks that would cause you to get your stake reward truncated. |
|
|
|
lightspeedy
Jr. Member
Offline
Activity: 109
Merit: 6
|
|
September 02, 2017, 12:09:16 PM |
|
I get the error loading blkindex.dat message with the v.1.5.5.5 Do i realy need to resync the whole chain? Might there be an initialisation bug? It's because I dont have such a file in my AppData folder.. Currently there is a blk0001.dat and blk0002 file available. |
https://hobotoken.com
https://hobomap.info
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1052
May the force bit with you.
|
|
September 02, 2017, 01:32:32 PM |
|
I get the error loading blkindex.dat message with the v.1.5.5.5 Do i realy need to resync the whole chain? Might there be an initialisation bug? It's because I dont have such a file in my AppData folder.. Currently there is a blk0001.dat and blk0002 file available. Just a bad error message. But likely something was wrong with your index. http://hobonickels.info/HBNBlockChain.zipJust grab this .zip and replace your blk0001.dat nad blk0002.dat and rename or remove your txleveldb folder and replace it with the one in the .zip |
|
|
|
|
dnp
|
|
September 03, 2017, 07:08:02 AM |
|
I get the error loading blkindex.dat message with the v.1.5.5.5 Do i realy need to resync the whole chain? Might there be an initialisation bug? It's because I dont have such a file in my AppData folder.. Currently there is a blk0001.dat and blk0002 file available. Just a bad error message. But likely something was wrong with your index. http://hobonickels.info/HBNBlockChain.zipJust grab this .zip and replace your blk0001.dat nad blk0002.dat and rename or remove your txleveldb folder and replace it with the one in the .zip i was going to mention that pre-leveldb error message, but it slipped my mind. i got it too last week. i had copied the txleveldb subfolder files over Samba networking and most of the files and folder had ownership/group set incorrectly. essentially that message was trying to say "permissions denied" to those files. so "check ownership and read/write access to files" is always good generic advice  |
Explorer and full node hosting at explorer.dognose.net
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1052
May the force bit with you.
|
|
September 03, 2017, 12:48:27 PM |
|
I get the error loading blkindex.dat message with the v.1.5.5.5 Do i realy need to resync the whole chain? Might there be an initialisation bug? It's because I dont have such a file in my AppData folder.. Currently there is a blk0001.dat and blk0002 file available. Just a bad error message. But likely something was wrong with your index. http://hobonickels.info/HBNBlockChain.zipJust grab this .zip and replace your blk0001.dat nad blk0002.dat and rename or remove your txleveldb folder and replace it with the one in the .zip i was going to mention that pre-leveldb error message, but it slipped my mind. i got it too last week. i had copied the txleveldb subfolder files over Samba networking and most of the files and folder had ownership/group set incorrectly. essentially that message was trying to say "permissions denied" to those files. so "check ownership and read/write access to files" is always good generic advice Ahhh I will also try to remember to open then up completely as well. Didn't think of this. Thanks. |
|
|
|
lightspeedy
Jr. Member
Offline
Activity: 109
Merit: 6
|
|
September 03, 2017, 01:52:48 PM |
|
I get the error loading blkindex.dat message with the v.1.5.5.5 Do i realy need to resync the whole chain? Might there be an initialisation bug? It's because I dont have such a file in my AppData folder.. Currently there is a blk0001.dat and blk0002 file available. Just a bad error message. But likely something was wrong with your index. http://hobonickels.info/HBNBlockChain.zipJust grab this .zip and replace your blk0001.dat nad blk0002.dat and rename or remove your txleveldb folder and replace it with the one in the .zip i was going to mention that pre-leveldb error message, but it slipped my mind. i got it too last week. i had copied the txleveldb subfolder files over Samba networking and most of the files and folder had ownership/group set incorrectly. essentially that message was trying to say "permissions denied" to those files. so "check ownership and read/write access to files" is always good generic advice Nah, that was not the issue in my case. The permissions on the files are "full access" and the owner is the user itself. Thank you Tranz for the download link, i try this one. |
https://hobotoken.com
https://hobomap.info
|
|
|
|
kurbeks
|
|
September 03, 2017, 03:58:06 PM |
|
Hi!
Do we have any other mining pools, now that H2C is in maintance.
Thanx
|
|
|
|
|
screaming_trees
Newbie
Offline
Activity: 26
Merit: 0
|
|
September 03, 2017, 05:03:40 PM |
|
I am still unable to sync even with an empty wallet with the newest version that had the newest block information added to the app data folder.
Could someone please post the current addnodes, thanks.
|
|
|
|
|
CoinEraser
Legendary
Offline
Activity: 1988
Merit: 1718
|
|
September 03, 2017, 08:12:43 PM |
|
I am still unable to sync even with an empty wallet with the newest version that had the newest block information added to the app data folder.
Could someone please post the current addnodes, thanks.
Here you can find current nodes: https://chainz.cryptoid.info/hbn/#!network addnode=104.230.143.200 addnode=109.227.254.135 addnode=118.210.65.144 addnode=119.4.220.173 addnode=119.4.220.48 addnode=153.167.128.232 addnode=172.221.219.6 addnode=172.58.201.178 addnode=173.216.69.133 addnode=173.246.10.52 addnode=175.152.105.145 addnode=175.152.105.31 addnode=178.248.4.130 addnode=181.41.40.164 addnode=181.41.41.251 addnode=184.54.5.230 addnode=188.61.212.220 addnode=192.64.4.114 addnode=192.64.5.210 addnode=24.212.140.163 addnode=5.103.138.97 addnode=65.60.236.56 addnode=73.121.216.227 addnode=73.228.39.117 addnode=75.71.127.100 addnode=77.22.251.50 addnode=89.236.135.220 addnode=94.113.207.67 addnode=95.222.25.22 Hope that helps. |
|
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1052
May the force bit with you.
|
|
September 03, 2017, 10:00:04 PM |
|
Hi!
Do we have any other mining pools, now that H2C is in maintance.
Thanx
No but solo mining works great! |
|
|
|
tokyoghetto
Legendary
Offline
Activity: 1232
Merit: 1000
|
|
September 03, 2017, 10:24:28 PM |
|
How long until cryptopia resumes trading on HBN?
|
|
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1052
May the force bit with you.
|
|
September 04, 2017, 01:24:28 AM |
|
How long until cryptopia resumes trading on HBN?
Out of my hands. I have opened ticket and let them know whatever they need I can make it happen. My guess is a week or 2. |
|
|
|
|
