NobleCoin[NOBL] - 8% PoS | 1Yr+ | MARKETPLACE | PAY | GIFT | CHARITIES/MERCHANTS

[eagleflies]

What are the nodes that it wallet should be connecting to?

Try 104.236.195.137

Still no connection with the new wallet, even with this node.

What wallet version are you using?

you can check this by issuing 'getinfo' command:

    "version" : "v2.0.0.0",
    "protocolversion" : 89000,
    "walletversion" : 60000,

if this is fine you can also try another node: addnode=194.181.3.79

Yes, getinfo gives the same information as yours.
The command addnode IP add doesn't work in the debug console. How to name the config file, noblcoinpos like the folder it created?

"noblecoin.conf" is config file name

Yes, you need to provide '-addnode' during startup so if you are under windows you can create shortcut to your wallet and modify it to include '-addnode=...'

Ok, found the mistake. It created a folder NobleCoinPOS in Appdata/Roaming. I created a conf file and names it Noblcoin.conf but that caused an error message. So I tried it with the config file's name NoblecoinPos.

I deleted the old wallet's folder and the newly created one, started the wallet and created noblecoin.conf. Now I'm connected. Thanks!!

No worries. Good luck with mining

What probably happened is this: at time of first connection your client does not know any IP addresses. It uses IRC to find other peers. However sometimes connection to IRC is delayed. After it finishes connection to IRC it learns and stores IP addresses of other peers. So next time you start your wallet it will use this information.

[tittiecoiner]

No worries. Good luck with mining

Thanks. Now I only need some luck to get my remaining coins from coinmine.pw. All payouts worked well so far but since a few hours it seems it's stuck.

[eagleflies]

No worries. Good luck with mining

Thanks. Now I only need some luck to get my remaining coins from coinmine.pw. All payouts worked well so far but since a few hours it seems it's stuck.

I see. If they do not make it before the switch, they will be able to migrate their wallet too and send the coins after the switch.

[tittiecoiner]

No worries. Good luck with mining

Thanks. Now I only need some luck to get my remaining coins from coinmine.pw. All payouts worked well so far but since a few hours it seems it's stuck.

I see. If they will not make it before the switch, they will be able to migrate their wallet too and send the coins after the switch.

Good to hear. The pool is great but the admin either lazy or not very interested. Missed many coin switched and miners lost a lot of coins (i.e. VIA).

[eagleflies]

No worries. Good luck with mining

Thanks. Now I only need some luck to get my remaining coins from coinmine.pw. All payouts worked well so far but since a few hours it seems it's stuck.

I see. If they will not make it before the switch, they will be able to migrate their wallet too and send the coins after the switch.

Good to hear. The pool is great but the admin either lazy or not very interested. Missed many coin switched and miners lost a lot of coins (i.e. VIA).

I do not know him but he actually promptly responded to my email with information about Noblecoin switching to PoS. So he pays some attention.

[eagleflies]

Plan of migration(on my side)

1. Just after block #534500 I take snapshot of PoW/old blockchain using fairglu's script
2. Distribute coins over test network (this takes about 45 minutes if no issues are spotted)
3. Distribute coins over real PoS blockchain (another 45 minutes)

This means whole process takes about 90 minutes. And if you imported priv keys from PoW wallet to PoS wallet you should see proper balance when whole process is finished.

[tittiecoiner]

Yay, found my first block 

[eagleflies]

Yay, found my first block 

good times

[mikeymillie]

Yay, found my first block 

What do you have in your noblecoin.conf file?   I have been mining for about 2 hours with no blocks found yet,  I have about 60kh running so far.   No blocks  

[james6546]

Yay, found my first block 

What do you have in your noblecoin.conf file?   I have been mining for about 2 hours with no blocks found yet,  I have about 60kh running so far.   No blocks  

I haven't found any in a while either and I have about 25kh. Have found 9 blocks so far, but a lot of those when the diff was mega low.

[mikeymillie]

Yay, found my first block 

What do you have in your noblecoin.conf file?   I have been mining for about 2 hours with no blocks found yet,  I have about 60kh running so far.   No blocks  

I haven't found any in a while either and I have about 25kh. Have found 9 blocks so far, but a lot of those when the diff was mega low.

I got a block at last.
Maybe it's just getting competitive  

[NorrisK]

Nice to see that the mining is going smooth. Should allow for an trouble free switch

[eagleflies]

Yay, found my first block 

What do you have in your noblecoin.conf file?   I have been mining for about 2 hours with no blocks found yet,  I have about 60kh running so far.   No blocks  

I haven't found any in a while either and I have about 25kh. Have found 9 blocks so far, but a lot of those when the diff was mega low.

I got a block at last.
Maybe it's just getting competitive  

You can use 'getmininginfo' to get more info. Also you can check how blocks are being mined at our block explorer.
https://chainz.cryptoid.info/nobles/#

[crackfoo]

If the community is interested, especially since you're moving to pure PoS, we're accepting new payouts coins to the xpool.ca multipool. Info in my sig.

Cheers!

[dida]

noblecoin-qt -salvagewallet doesnt work for me

[eagleflies]

noblecoin-qt -salvagewallet doesnt work for me

What happens? Is your wallet encrypted?

[adam1230]

noblecoin-qt -salvagewallet doesnt work for me

What happens? Is your wallet encrypted?

I just ran it and it worked. Obviously we do not have our coins yet because the official switch still has 45 minutes until it actually happens.

I did notice though that the 2.0 wallet is back to the old ugly style wallet and it cuts off our last character in our wallet address when you look at the "receive coins" section or do a "copy address"

[dida]

noblecoin-qt -salvagewallet doesnt work for me

What happens? Is your wallet encrypted?

no it is not...can You please explain procedure ones more - step by step (version for total dummies please)  

[eagleflies]

noblecoin-qt -salvagewallet doesnt work for me

What happens? Is your wallet encrypted?

no it is not...can You please explain procedure ones more - step by step (version for total dummies please)  

Right now I need to focus on making the switch happen. But please write what exactly you did so someone will be able to help you.
In particular please provide information: have you seen any errors? or is the problem that you see balance of 0?

In fact there is "step by step version" which describes how to do it manually. You can take a look:
https://github.com/eagleflies/noblecoin/wiki/Manual-way-of-importing-private-keys

[eagleflies]

noblecoin-qt -salvagewallet doesnt work for me

What happens? Is your wallet encrypted?

I just ran it and it worked. Obviously we do not have our coins yet because the official switch still has 45 minutes until it actually happens.

I did notice though that the 2.0 wallet is back to the old ugly style wallet and it cuts off our last character in our wallet address when you look at the "receive coins" section or do a "copy address"

The switch is actually a process. It is likely to take about 90 minutes. Please take a look at details https://bitcointalk.org/index.php?topic=402667.msg10655417#msg10655417