[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[kayomani]

Wallet wouldn't sync on my local pc so i have put up a server node which should be online perminently.

Donations  UY5PtLXA8AqGcuVepN35HFUe3nSUzrQYvU

In C:\Users\you\AppData\Roaming\Ultracoin\Ultracoin.conf
Put addnode=37.187.98.146

[skribnod]

Anyone getting high hashes with 280x cards? I can't seem to break 450 each card. Check my post to se id you can help.
Thanks

[nanoprobe]

Thanks for your help guys - going to have a play with the settings. I know I'm not the only one with this problem so will post my results.

I've removed catalyst 14 and gone back to 13.11 and its not made a difference. Will probably try going back to 12 next if I can find a copy. These cards are mining on standard scrypt coins fine.

I'm using windows 7 btw.

Removing 14 and going back to 13.11 is not enough. If you've already remover 14 and installed 13.11 you need to uninstall 13.11, reboot, run Driver Sweeper to remove all the junk left over, reboot, reinstall 13.11, reboot. That should eliminate the drivers as your problem.

[scottycam]

Thanks for your help guys - going to have a play with the settings. I know I'm not the only one with this problem so will post my results.

I've removed catalyst 14 and gone back to 13.11 and its not made a difference. Will probably try going back to 12 next if I can find a copy. These cards are mining on standard scrypt coins fine.

I'm using windows 7 btw.

Removing 14 and going back to 13.11 is not enough. If you've already remover 14 and installed 13.11 you need to uninstall 13.11, reboot, run Driver Sweeper to remove all the junk left over, reboot, reinstall 13.11, reboot. That should eliminate the drivers as your problem.

Didn't need to do all that, just ran the catalyst uninstaller.

Turned out the problem was to do with the worksize (changing 256 to 64 fixed it).

[nanoprobe]

Thanks for your help guys - going to have a play with the settings. I know I'm not the only one with this problem so will post my results.

I've removed catalyst 14 and gone back to 13.11 and its not made a difference. Will probably try going back to 12 next if I can find a copy. These cards are mining on standard scrypt coins fine.

I'm using windows 7 btw.

Removing 14 and going back to 13.11 is not enough. If you've already remover 14 and installed 13.11 you need to uninstall 13.11, reboot, run Driver Sweeper to remove all the junk left over, reboot, reinstall 13.11, reboot. That should eliminate the drivers as your problem.

Didn't need to do all that, just ran the catalyst uninstaller.

Turned out the problem was to do with the worksize (changing 256 to 64 fixed it).

Glad to hear you solved your problem but you'd be shocked if you saw all the junk catalyst uninstaller leaves behind, especially when you're downgrading your driver.

[fredeq]

Anyone getting high hashes with 280x cards? I can't seem to break 450 each card. Check my post to se id you can help.
Thanks

570 per card with "common" settings. You have problems with scrypt hashrate aswell or jane only?

[skribnod]

Anyone getting high hashes with 280x cards? I can't seem to break 450 each card. Check my post to se id you can help.
Thanks

570 per card with "common" settings. You have problems with scrypt hashrate aswell or jane only?

I usually average 730khs each card while mining doge or litecoin. I am running the miner from this website and also tried the one from ultraleet pools website. You can see my settings and results earlier today. I dont understand why i dropped 300khs with same cards.

Thanks

[skribnod]

Fredeg this is what i am doing...see anything i can do diferent?


Think I have leetpools connected now but not getting the hashes out of my 280x cards I would like.  Thanks



timeout /t 5

setx GPU_MAX_ALLOC_PERCENT 100

setx GPU_USE_SYNC_OBJECTS 1

color 2




ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.x -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale


 cgminer version 3.7.2 - Started: [2014-02-08 15:21:17]
-----------------------------------------------------------------------------
 (5s):909.2K (avg):910.6Kh/s | A:4400  R:32  HW:0  WU:829.9/m
 ST: 1  SS: 1  NB: 14  LW: 394  GF: 0  RF: 0
 Connected to ultra.leetpools.com diff 64 with stratum as user user.x
 Block: 741cf055...  Diff:29  Started: [15:26:28]  Best share: 1.58K
-----------------------------------------------------------------------------
 [P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU 0:  59.0C 2158RPM | 456.4K/460.6Kh/s | A:2160 R: 0 HW:0 WU: 420.2/m I:13
 GPU 1:  64.0C 2494RPM | 457.9K/461.7Kh/s | A:2240 R:32 HW:0 WU: 409.7/m I:13
-----------------------------------------------------------------------------

 [2014-02-08 15:26:08] Accepted 02aab09c Diff 96/64 GPU 1
 [2014-02-08 15:26:09] Accepted 036fd1e6 Diff 74/64 GPU 1
 [2014-02-08 15:26:12] Network diff set to 30
 [2014-02-08 15:26:12] Stratum from pool 0 detected new block
 [2014-02-08 15:26:12] Accepted dee3df77 Diff 294/64 GPU 0
 [2014-02-08 15:26:13] Accepted 7f097cfc Diff 516/64 GPU 1
 [2014-02-08 15:26:22] Accepted 038d5c37 Diff 72/64 GPU 0
 [2014-02-08 15:26:25] Network diff set to 28
 [2014-02-08 15:26:25] Stratum from pool 0 detected new block
 [2014-02-08 15:26:28] Network diff set to 29
 [2014-02-08 15:26:28] Stratum from pool 0 detected new block
 [2014-02-08 15:26:29] Accepted c7c14e17 Diff 328/64 GPU 0

[TR8888]

When we hitting crapsy then? Or is that not the idea?   

[laterbreh]

ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

Is getting me about 500Khs+ on my 280x and 7970.

Also again, some users are reporting issues connecting to our .COM stratum, IF you experience this, Just switch to .NET, and you wont have any problems.

Everything is running smoothly at leetpools.

Post questions about the config and Ill do what I can to work you guys through your issues.

Thanks.

[TR8888]

Not long jumped onto your pool after being on 3 other's that regularly crapped out. Here's to a nice stable mine! 

[Protagonus]

been doing some digging and playing with miner settings.  There may be some settings people can try that, most probably, will give you more Khs.
 You should get 10%+/- over typical settings.

7950's  
ultracoinminer -o stratum+tcp://ultra.leetpools.net:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 32256 -g 1 -I 20 -w 512 --gpu-powertune 20 --expiry 5 --queue 0 --scan-time 0 --no-submit-stale

290's
ultracoinminer -o stratum+tcp://ultra.leetpools.net:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 32756 -g 1 -I 20 -w 512 --gpu-powertune 20 --expiry 5 --queue 0 --scan-time 0 --no-submit-stale

You can lower intensity some if you have stability issues.  


Edit: you can also probably lower your mem clocks some without dropping WU much.  Helps some with heat and power.  Mem in the 1200-1500 should be good.  GPU clocks 1000 +/- should be fine as well. I have same WU with 1090 and 1040 Core clocks.

happy mining

[imginy]

Anyone got instructions to the POS so I can get free coins?

Maybe you could add them to the front page?

[nanoprobe]

ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

Is getting me about 500Khs+ on my 280x and 7970.

Also again, some users are reporting issues connecting to our .COM stratum, IF you experience this, Just switch to .NET, and you wont have any problems.

Everything is running smoothly at leetpools.

Post questions about the config and Ill do what I can to work you guys through your issues.

Thanks.

What are your core and memory clocks? I can't get my 7970 past 475 no matter what I try. Does 720 on litecoin.

[solarflareq]

This Coin needs to be on a larger exchange its floundering atm on crypto-Trade not enough $ /volume to keep it trading everyone who wanted to spend $ on it already has and the only people doing anything with it now are people who just want to sell it high and then try and drop the price to rebuy in low basically causing the value to just go up down up down all day long.

[Extornia]

Guys, my 7970 lightning getting massive amunts of hw errors. Running 14.1 drivers. Should i rollback to 13.12?

[laterbreh]

ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

Is getting me about 500Khs+ on my 280x and 7970.

Also again, some users are reporting issues connecting to our .COM stratum, IF you experience this, Just switch to .NET, and you wont have any problems.

Everything is running smoothly at leetpools.

Post questions about the config and Ill do what I can to work you guys through your issues.

Thanks.

What are your core and memory clocks? I can't get my 7970 past 475 no matter what I try. Does 720 on litecoin.

1020 Core 1500 Memory, Powertune 20%

[Extornia]

ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

Is getting me about 500Khs+ on my 280x and 7970.

Also again, some users are reporting issues connecting to our .COM stratum, IF you experience this, Just switch to .NET, and you wont have any problems.

Everything is running smoothly at leetpools.

Post questions about the config and Ill do what I can to work you guys through your issues.

Thanks.

What are your core and memory clocks? I can't get my 7970 past 475 no matter what I try. Does 720 on litecoin.

1020 Core 1500 Memory, Powertune 20%

No need to have powertune to 20%. 1080 core will get u to 580

[laterbreh]

Guys, my 7970 lightning getting massive amunts of hw errors. Running 14.1 drivers. Should i rollback to 13.12?

Yea 14.1 Wont work with Jane. Its confirmed.

[nanoprobe]

Guys, my 7970 lightning getting massive amunts of hw errors. Running 14.1 drivers. Should i rollback to 13.12?

Yes. It seems the 14.1 doesn't place nice with scrypt-jane. Maybe try lowering the intensity first to see if that might help. Just guessing on that one.