[POOL][Scrypt][Scrypt-N][X11] Profit switching pool - wafflepool.com

[phzi]

@poolwaffle,

i was not saying there is a problem, i was only commenting that my hash rate changes via the website but not on cgminer similar to what rocks was saying.  that depending upon the coin my reported hash rate on the website shows different than the reported hashrate on cgminer.  I did not know about the WU difference.

That is the case with mining period - the pool can never know your exact hashrate, it can only approximate it based on the rate your miner is submitting shares.  Small fluctuations like you are seeing will always occur, to everyone.  The gridseed issue is a totally separate problem, where significant portions of hashrate appear to be 'lost'.

Edit: I also just realized our "vs LTC" includes the 2% fee we charge.  It is based on what is actually earned by user accounts (and thus affected by our fee).  I don't know which I feel is better for that column, and I'd like some input if possible.  Essentially if we had a perfect (see conditions above) of mining only LTC, we would show 98% of LTC in that column (100% - 2% fee).  Showing it with the fee included is more accurate, where "this is what you actually get", then again, if people are factoring the 2% into the calculation afterwards (since it isn't mentioned), it looks worse than it actually is.

Input?

I would suggest adding a comment by the table saying something like, "% vs LTC is calculated by comparison to a PPS pool with 2% fee."

[1714252130]

1714252130

[1714252130]

1714252130

[1714252130]

1714252130

[1714252130]

1714252130

[1714252130]

1714252130

[malodin]

@poolwaffle,

i was not saying there is a problem, i was only commenting that my hash rate changes via the website but not on cgminer similar to what rocks was saying.  that depending upon the coin my reported hash rate on the website shows different than the reported hashrate on cgminer.  I did not know about the WU difference.

That is the case with mining period - the pool can never know your exact hashrate, it can only approximate it based on the rate your miner is submitting shares.  Small fluctuations like you are seeing will always occur, to everyone.  The gridseed issue is a totally separate problem, where significant portions of hashrate appear to be 'lost'.

Edit: I also just realized our "vs LTC" includes the 2% fee we charge.  It is based on what is actually earned by user accounts (and thus affected by our fee).  I don't know which I feel is better for that column, and I'd like some input if possible.  Essentially if we had a perfect (see conditions above) of mining only LTC, we would show 98% of LTC in that column (100% - 2% fee).  Showing it with the fee included is more accurate, where "this is what you actually get", then again, if people are factoring the 2% into the calculation afterwards (since it isn't mentioned), it looks worse than it actually is.

Input?

I would suggest adding a comment by the table saying something like, "% vs LTC is calculated by comparison to a PPS pool with 2% fee."

phzi, thanks for that info.

[inductiveconcepts]

I would suggest adding a comment by the table saying something like, "% vs LTC is calculated by comparison to a PPS pool with 2% fee."

I second this suggestion.

[bexwhitt]

My returns from the pool seem correct and my rejects seem reasonably low

just a quick question my log file keeps coming out with this



Apr  9 22:08:16 bfgminer[2396]: JSON-RPC non method decode failed: (null)

Apr  9 22:08:16 bfgminer[2396]: Unknown stratum msg: {"id":null,"result":[],"error":true}

is it any sort of problem?


http://waffles.wilschrader.com/stats?address=1CxNFa8uE2J1hYDb6FNASauoqEnd3fDjhd#

[poolwaffle]

My returns from the pool seem correct and my rejects seem reasonably low

just a quick question my log file keeps coming out with this

Apr  9 22:08:16 bfgminer[2396]: JSON-RPC non method decode failed: (null)
Apr  9 22:08:16 bfgminer[2396]: Unknown stratum msg: {"id":null,"result":[],"error":true}

Do you have any backup pools enabled that that could be coming from?  We don't ever send those messages (at least we shouldn't)...

[bexwhitt]

My returns from the pool seem correct and my rejects seem reasonably low

just a quick question my log file keeps coming out with this

Apr  9 22:08:16 bfgminer[2396]: JSON-RPC non method decode failed: (null)
Apr  9 22:08:16 bfgminer[2396]: Unknown stratum msg: {"id":null,"result":[],"error":true}

Do you have any backup pools enabled that that could be coming from?  We don't ever send those messages (at least we shouldn't)...

at the moment hashra contola does not allow backup pools so no.

[phzi]

 

at the moment hashra contola does not allow backup pools so no.

Sounds like something weird with Hashra.  Maybe try another controller like Scrypta to see if the problem still occurs?

Some other controller options: http://cryptomining-blog.com/1917-raspberry-pi-controller-images-with-gridseed-asic-support/

[amit2007gunjan]

Hi ! Waffle Pool Recent Pay out status shows that payout of 0.01332286 on 2014-04-10 05:00:35, but i haven't received the pay out.

My user id is 1EeijSR9kPSfSzRPonEwxUxUzyNKrue9AT.

Admin, please help..

[amit2007gunjan]

Hi ! Waffle Pool Recent Pay out status shows that payout of 0.01332286 on 2014-04-10 05:00:35, but i haven't received the pay out.

My user id is 1EeijSR9kPSfSzRPonEwxUxUzyNKrue9AT.

Admin, please help..

ok, i have got it just now. Thanks.

[golden0707]

Hi ! Could anyone please tell why there is no payouts for a couple of days. Ive started mining 2-3 days ago. Bitcoins earned (not yet sent): 0.01018845. I thought payments are several times a day. Isnt it ?

1HTgxSxA72oXp7wst4QvK8fwCoqqUkWfyF

Plz Help.

[bexwhitt]

at the moment hashra contola does not allow backup pools so no.

Sounds like something weird with Hashra.  Maybe try another controller like Scrypta to see if the problem still occurs?

Some other controller options: http://cryptomining-blog.com/1917-raspberry-pi-controller-images-with-gridseed-asic-support/

Scripta does not really work with gridseeds if you have more than a couple it keeps dropping the miners

[bexwhitt]

Is wafflestats down atm?

[fair-cointeam]

Is wafflestats down atm?

yes..
http://waffles.wilschrader.com/

[rigrenter]

What are your experiences with mining @wafflepool and using gridseed miners? Do you use diff higher then 512? Do you use cgminer of bfgminer? Thanks!

[ak111in]

Is wafflestats down atm?

try www.wafflepoolmonitor.com for graphs.

[edonkey]

at the moment hashra contola does not allow backup pools so no.

Sounds like something weird with Hashra.  Maybe try another controller like Scrypta to see if the problem still occurs?

Some other controller options: http://cryptomining-blog.com/1917-raspberry-pi-controller-images-with-gridseed-asic-support/

Scripta does not really work with gridseeds if you have more than a couple it keeps dropping the miners

I'm using the girnyau cgminer and the Scripta web frontend with 10 GridSeeds on my own Raspberry Pi image (not the Scripta image) and it's working. However I found that I had to disable the Scripta cron jobs or I would see USB disconnects with the GridSeeds.

Here's my post on the subject in case it's helpful:

https://bitcointalk.org/index.php?topic=494625.msg6113466#msg6113466

[supershibesodoge]

Hi ! Could anyone please tell why there is no payouts for a couple of days. Ive started mining 2-3 days ago. Bitcoins earned (not yet sent): 0.01018845. I thought payments are several times a day. Isnt it ?

1HTgxSxA72oXp7wst4QvK8fwCoqqUkWfyF

Plz Help.

When am I paid?

Payouts are processed multiple times a day, and anyone with a balance over 0.01 BTC is automatically paid in order of when you reached the threshold. On Sundays we pay everyone with a balance over 0.001.

How fucking hard is it to read info on page before pointing miner? 

[actudoran]

HELP !
I just reflashed the usb drive with smos 1.3 and cofigured to eu.wafflepool... am getting 710 + 250 mhs ( same as before ), which is being confirmed on the stats but the payout for the last 24 h is measily ... 0.0003 btc ... about 10-12 times slowere than it should have been...
was mining just fine before on smos 1.3 with good results ... average was 0.004+ a day ... anyway ... here's a copy of the conf file::
"api-listen" : true,
"intensity" : "20,13",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt",
"auto-fan" : true,
"temp-cutoff" : "85,90",
"temp-overheat" : "83,87",
"temp-target" : "76,82",
"expiry" : "30",
"gpu-dyninterval" : "7",
"log" : "5",
"queue" : "1",
"retry-pause" : "5",
"scan-time" : "30",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"shaders" : "2048",
"thread-concurrency" : "24768,6500",
"gpu-thread" : "1",
"gpu-engine" : "1100,980",
"sharethreads" : "32",
"lookup-gap" : "0",
"gpu-powertune" : "20",
"gpu-memclock" : "1500,1300",
"gpu-vddc" : "1.13",
"gpu-fan" : "0-95,50-95"

anyone got any ideea what's going on ?
thanks in advance !

[phzi]

HELP !
I just reflashed the usb drive with smos 1.3 and cofigured to eu.wafflepool... am getting 710 + 250 mhs ( same as before ), which is being confirmed on the stats but the payout for the last 24 h is measily ... 0.0003 btc ... about 10-12 times slowere than it should have been...

"payout" ?  Meaning the amount you got paid?  Did you look at your stats page to see your unconfirmed/unsent balances?

[actudoran]

yeah ... sorry ... I meant the amount unsent + unconverted ...