[POOL][Scrypt][Scrypt-N][X11] Profit switching pool - wafflepool.com

[superman3486]

workers hash rate falling its almost 0 with all my rigs, whats happening? but yet all my rigs are still mining

[1714294433]

1714294433

[1714294433]

1714294433

[1714294433]

1714294433

[edonkey]

workers hash rate falling its almost 0 with all my rigs, whats happening? but yet all my rigs are still mining

Same thing is happening to me. I've got two separate rigs (Gridseed and Dual Miner based). Both of them started to flatline about 25 minutes ago according to the server side specs and WafflePoolMonitor (which I just started using today):

http://www.wafflepoolmonitor.com/index.php?address=13SwGJmgPWVUAY9CszPQ7H4WL1RBqto3zu

I see no shares registered in the WafflePool side after shift ID 19178.

On my side things seem to be working normally and I see nothing in the logs that indicates a problem.

Something seems to be wrong on the WafflePool side, either with actual mining or the API.

I only just came to WP yesterday after being frustrated with CleverMining's bad profitability. This better get straightened out soon or I'm heading back to CM.

[yogibaer]

workers hash rate falling its almost 0 with all my rigs, whats happening? but yet all my rigs are still mining

I noticed the same problem. What's going on?

[oktay50000]

omg hashrate 56gh  
i think servers overloaded

[ibfr33k]

Same here.  It shows that I didn't submit any shares for the past 5 rounds but my miners are hashing just fine.

[Pierre3400]

omg hashrate 56gh 
i think servers overloaded

With that said.... My stats are showing 0 across the board, but my miners are connected and working away??

Stats issue or am i working without pay?

[yogibaer]

Hashrate: 54.69 GH/s     Miners: 340     Mining: hidden     Time: 19:28:02

340 miners left? before there 5000+ miners.

[imall4btc]

Hashrate: 54.69 GH/s     Miners: 340     Mining: hidden     Time: 19:28:02

340 miners left? before there 5000+ miners.

Hell yeah!! What's this?!!

Current Statistics: Hashrate: 54.33 GH/s     Miners: 222     Mining: litecoin     Time: 19:31:03

As well as my miner kH/s is "0", however my miner is working perfectly and hashing continuously.

Something going crazy with the "WafflePool" statistics...

PoolWaffle??

[oktay50000]

i hope 5 rounds lost in this shitty situation
low profit
btc price falling
china ban
waffle hash issue
shares lost in 5 round??!
whats happening in crypto world...

[VirosaGITS]

More hijacking?

[imall4btc]

PoolWaffle posted this update @ website: Note: Some stats are paused while correcting some stuff on the backend, mining is unaffected.

All cool now..

[ronindrm81]

Hashrate: 54.69 GH/s     Miners: 340     Mining: hidden     Time: 19:28:02

340 miners left? before there 5000+ miners.

Hell yeah!! What's this?!!

Current Statistics: Hashrate: 54.33 GH/s     Miners: 222     Mining: litecoin     Time: 19:31:03

As well as my miner kH/s is "0", however my miner is working perfectly and hashing continuously.

Something going crazy with the "WafflePool" statistics...

PoolWaffle??

I had the same problem and what I did is to restart the miner and everything is back to normal for now. But I think that the rounds that were reported with "0" ,even if our rigs worked perfectly, will not be taken into consideration for our profit calculation. Our loss
Will have to wait and see what the dev will have to say.

[VirosaGITS]

Wheew, okay, my mining stats were abnormally high (200x time higher than normal, i thought i was mining low art 200kh but it was actually at 200mh o.O) good thing to know it was just a display bug.

[imall4btc]

Hashrate: 54.69 GH/s     Miners: 340     Mining: hidden     Time: 19:28:02

340 miners left? before there 5000+ miners.

Hell yeah!! What's this?!!

Current Statistics: Hashrate: 54.33 GH/s     Miners: 222     Mining: litecoin     Time: 19:31:03

As well as my miner kH/s is "0", however my miner is working perfectly and hashing continuously.

Something going crazy with the "WafflePool" statistics...

PoolWaffle??

I had the same problem and what I did is to restart the miner and everything is back to normal for now. But I think that the rounds that were reported with "0" ,even if our rigs worked perfectly, will not be taken into consideration for our profit calculation. Our loss
Will have to wait and see what the dev will have to say.

Ronindrm81, I think we didn't lose anything as the stats were only paused while poolwaffle was doing some work at the back office and as reported by him on the website recently, mining is totally unaffected.

[ronindrm81]

Hashrate: 54.69 GH/s     Miners: 340     Mining: hidden     Time: 19:28:02

340 miners left? before there 5000+ miners.

Hell yeah!! What's this?!!

Current Statistics: Hashrate: 54.33 GH/s     Miners: 222     Mining: litecoin     Time: 19:31:03

As well as my miner kH/s is "0", however my miner is working perfectly and hashing continuously.

Something going crazy with the "WafflePool" statistics...

PoolWaffle??

I had the same problem and what I did is to restart the miner and everything is back to normal for now. But I think that the rounds that were reported with "0" ,even if our rigs worked perfectly, will not be taken into consideration for our profit calculation. Our loss
Will have to wait and see what the dev will have to say.

Ronindrm81, I think we didn't lose anything as the stats were only paused while poolwaffle was doing some work at the back office and as reported by him on the website recently, mining is totally unaffected.

Good to know
Thank you

[poolwaffle]

Sorry about that guys, was furiously writing fixes.

Essentially what happened was a new layer of caching broke, and shares were being counted incorrectly per-shift.  We've nuked the shift data, and re-processed from raw share logs, so everything should be correct (and the miners page shows more shifts so you guys can confirm).

The only thing that will still be incorrect are the unconfirmed balances on per-user accounts.  Essentially when blocks were found during that time that it was broken, the rewards were distributed based on the incorrect data.  The good news is, no blocks confirmed during that time, so it is limited to unconfirmed balances.  These will need to be cleaned up (working on it right now).  Chances are you'll see all of the blocks found during that period be marked as orphans (removing your unconfirmed balance), and then a few seconds later, assigned again (but correct amounts this time) as unconfirmed.

Again, still working on it, so some things still look incorrect, but they're actively being fixed.

One thing to note for now, block-processing has been disabled (earning distribution) while I fix the previous mentioned problem.  So profit stats will be incorrect until it is re-enabled.  Blocks are being found correctly, and everything is fine, it is just a visual display issue.

[poolwaffle]

Blocks during the time period where things were broken were removed (marked orphan) from balances, and reprocessed.  So you might see some oddities if you were looking at balances over the last few minutes (it would drop and go back up).

Everything should be correct now, shares are all processed correctly, blocks are processed correctly.  Sorry for the confusion

[imall4btc]

Blocks during the time period where things were broken were removed (marked orphan) from balances, and reprocessed.  So you might see some oddities if you were looking at balances over the last few minutes (it would drop and go back up).

Everything should be correct now, shares are all processed correctly, blocks are processed correctly.  Sorry for the confusion

Good to hear that, poolwaffle. Cheers for everything being back in proper order.

[orenjuice5]

Anyone can help a newbie out please

I got my gridseed, connected it with my laptop using the 3.7.2 CGminer for gridseed and set up my pools. I am mining at the switching profit pool at waffle.

For some reason CGminer stop reporting shares being accepted after 2-5 minutes and only shows the difficulty change on the pool and informing me when blocks are being found but it stops to submitting shares.

There is no error code and the reported hash rate is about 362KH (850MH). When I restart CGminer I get error message that there is no device found but there is no error prior to me restarting CGminer. What I have to do to get it working again is close CGminer remove the USB cable and put it back in and then open CGminer again. It will work for a few minutes and then stop submitting shares again....

I disabled the go to sleep mode on the laptop so I am not sure why this keeps on happening.

I know its not a pool problem because my GPU rig is working fine at waffle and the problem is happening even when I switch to a different pool

Anyone has any thought or suggestions?

Please help

Thanks

[healthandwealth]

Is assessing the WaffleSTATs page still available?  I can see the normal stats page but I can't seem to find the link for the advanced stats and graphs for a specific miner address.  Anyone know?