[POOL][Scrypt][Scrypt-N][X11] Profit switching pool - wafflepool.com

[goodluck0319]

is x11/x13 pool already yet?

[1715123342]

1715123342

[1715123342]

1715123342

[1715123342]

1715123342

[jemmyboy]

Whats happened to the X11 stats?

[Zels]

For now, everythings fine for me on X11

@poolwaffle Do you store all the algo payout in one place, or are they all separate ?
I have 0.00015449 for scrypt-n & 0.00151591 for X11.  Will you pay me both algo in one ? ^^

[oktay50000]

hey waffle any plans to add x11/x13 multipools
and multi algo switch

You're kidding right?

no man not kiddin

[suchmoon]

hey waffle any plans to add x11/x13 multipools
and multi algo switch

You're kidding right?

no man not kiddin

It's probably not a good idea to post this link here since you seem to have a reading issue  ... don't blame me if you hurt yourself: http://wafflepool.com/newalgos

[jemmyboy]

Whats happened to the X11 stats?

hmmm i see now

[poolwaffle]

hey waffle any plans to add x11/x13 multipools
and multi algo switch

You're kidding right?

no man not kiddin

Literally, every single one of the 10+ (I stopped counting at 10) of the posts immediately before yours, and almost every post of my "recent history" all mention the new X11 pool in some way.  I honestly don't know what to tell you.  I don't mean to be a dick, but I'm going to stop answering posts that have such blatently obvious answers if someone would take the time to read posts.  I don't mean like "you didn't read through the last 15 pages, the answer is in there", I mean "anywhere in the last page, literally any post".  That's just being rediculously lazy, and expecting others to spoon-feed you.

For now, everythings fine for me on X11

@poolwaffle Do you store all the algo payout in one place, or are they all separate ?
I have 0.00015449 for scrypt-n & 0.00151591 for X11.  Will you pay me both algo in one ? ^^

Currently payouts are run 100% separately.  So, if you had 0.004 in one, and 0.001 in another, you wouldn't be paid on the normal schedule (neither of them meets 0.005 minimum), however you would be paid on Sunday.  This will change as soon as we have all the algorithms in and working (another week?)  But for now, having them 100% separated means that if anything goes wrong (doesn't look like it will, but I like to be extra cautious), means I can see exactly what went wrong, instead of adding a layer of "uhhh, is this Scrypt, or X11, or what, and how much of each?"

[utahjohn]

@PW
with D=0.160 about how often should I be finding a share on X11 (Have not found any in 20 minutes). My hashrate is about 2.0 MHs.

[poolwaffle]

@PW
with D=0.160 about how often should I be finding a share on X11 (Have not found any in 20 minutes). My hashrate is about 2.0 MHs.

Thats probably 10x what you should be at

Switch to either 0.008 or 0.016 (probably better).

[chadwickx16]

@PW
with D=0.160 about how often should I be finding a share on X11 (Have not found any in 20 minutes). My hashrate is about 2.0 MHs.

Thats probably 10x what you should be at

Switch to either 0.008 or 0.016 (probably better).

Can you post a table on the X11 Beta page similar to the one on the FAQ page?  I think it would help people set their own difficulty.

[Trestle]

PW when I look at the my stats on my ipad the Bitcoin Earnings and the X11 at the top in the header do not show everything else looks fine though. On a PC everything looks fine so I am not sure if you are pushing a different Mobile version or if these just haven't been added being beta just wanted to give you a heads up.

[utahjohn]

@PW

I have d=0.008 set in config but pool keeps changing to 0.160

[16:30:46] Network diff set to 358
[16:30:46] Stratum from Pool 0 detected new block
[16:32:09] Network diff set to 355
[16:32:09] Stratum from Pool 0 detected new block
[16:33:39] Stratum connection to Pool 0 interrupted
[16:33:40] Pool 0 difficulty changed to 0.160
[16:34:24] Pool 0 difficulty changed to 0.008
[16:34:24] Stratum from Pool 0 requested work restart
[16:34:24] Network diff set to 317
[16:34:24] Stratum from Pool 0 detected new block
[16:35:54] Stratum connection to Pool 0 interrupted
[16:35:55] Pool 0 difficulty changed to 0.160
[16:37:25] Stratum connection to Pool 0 interrupted
[16:37:25] Pool 0 difficulty changed to 0.160

Been running for several hours and have not found a single share (at 3.7MHs)

Edit: AHHH changed from kernel x11mod to kernel darkcoin and got a share almost immediately ...

x11mod = 3.7Mhs and no shares + HW errors
darkcoin = 2.2MHs and getting shares

[utahjohn]

@PW
Some X11 coins to consider: LitecoinX and Darkcoin

[poolwaffle]

PW when I look at the my stats on my ipad the Bitcoin Earnings and the X11 at the top in the header do not show everything else looks fine though. On a PC everything looks fine so I am not sure if you are pushing a different Mobile version or if these just haven't been added being beta just wanted to give you a heads up.

Its set as a cookie, so you'll have to hit "enable" on each device

@PW
Some X11 coins to consider: LitecoinX and Darkcoin

Darkcoin has been added, just disabled until we have enough hashrate to actually solve blocks reliably (approx every hour).  LitecoinX I'll check out

[suchmoon]

x11mod = 3.7Mhs and no shares + HW errors
darkcoin = 2.2MHs and getting shares

What kind of GPU(s) are you using? If it's one of 7950/280X/270X/290 I can give you some settings to try with x11mod that work for me.

[toxic0n]

How to I retrieve X11 stats from tmp_api? "?algo=x11", I'm guessing?

Gotta update my widget again haha.

[utahjohn]

x11mod = 3.7Mhs and no shares + HW errors
darkcoin = 2.2MHs and getting shares

What kind of GPU(s) are you using? If it's one of 7950/280X/270X/290 I can give you some settings to try with x11mod that work for me.

R9280X sgminer 4.1 x11x13mod

Working config:
{
"pools" : [
   {
      "url" : "stratum+tcp://uswest.wafflepool.com:3331",
      "user" : "1HANJQygp3jHuzutceBgMT7wfCgEug6h4L_gpu3",
      "pass" : "d=0.008"
   }
]
,
"intensity" : "13",
"worksize" : "256",
"kernel" : "darkcoin",
"lookup-gap" : "2",
"thread-concurrency" : "24576",
"shaders" : "2048",
"gpu-threads" : "4",
"gpu-engine" : "1050-1075",
"gpu-fan" : "70-100",
"auto-fan" : true,
"gpu-memclock" : "1600",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "70",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "90",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "60",
"tcp-keepalive" : "30",
"temp-hysteresis" : "2",
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"no-client-reconnect" : true
}

sgminer 4.1.0 - Started: [2014-06-06 18:05:00] - [0 days 00:53:50]
--------------------------------------------------------------------------------
(5s):2.216M (avg):2.237Mh/s | A:175  R:5  HW:0  WU:0.028/m
ST: 0  SS: 0  NB: 131  LW: 3973  GF: 1  RF: 0
Connected to uswest.wafflepool.com:3331 (stratum) diff 0.008 as user 1HANJQygp3j
Block: 11c99260...  Diff:25  Started: [18:58:46]  Best share: 1.454
--------------------------------------------------------------------------------
[P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU 0:  66.0C 2809RPM | 2.256M/2.239Mh/s | A:175 R:  2.8% HW:0 WU:0.028/m I:13
--------------------------------------------------------------------------------
[18:57:10] Stratum from Pool 0 detected new block
[18:57:12] Accepted 0e4f7683 Diff 0.070/0.008 GPU 0 at Pool 0
[18:57:46] Accepted 1e3eb667 Diff 0.033/0.008 GPU 0 at Pool 0
[18:58:00] Accepted 17b646de Diff 0.042/0.008 GPU 0 at Pool 0
[18:58:09] Stratum from Pool 0 detected new block
[18:58:14] Stratum from Pool 0 detected new block
[18:58:20] Stratum from Pool 0 detected new block
[18:58:27] Network diff set to 24
[18:58:27] Stratum from Pool 0 requested work restart
[18:58:27] New block detected on network before pool notification
[18:58:29] Accepted 77b411eb Diff 0.008/0.008 GPU 0 at Pool 0
[18:58:40] Accepted 571d6658 Diff 0.011/0.008 GPU 0 at Pool 0
[18:58:46] Network diff set to 25
[18:58:46] Stratum from Pool 0 detected new block

EDIT: I could use a config for 7950 also

[suchmoon]

R9280X sgminer 4.1 x11x13mod
EDIT: I could use a config for 7950 also

Here is what works for me.

280X = 3 MH/s

    "worksize": "256",
    "intensity": "16",
    "thread-concurrency": "8192",
    "vectors" : "1",
    "gpu-engine" : "1045",
    "gpu-memclock" : "1500",
    "gpu-powertune" : "-20",
    "lookup-gap" : "2",
    "gpu-threads" : "2",
    "kernel": "x11mod",   

7950 = 2.63 MH/s

    "worksize": "256",
    "intensity": "20",
    "thread-concurrency": "14336",
    "vectors" : "1",
    "gpu-engine" : "1100",
    "gpu-memclock" : "1250",
    "gpu-powertune" : "0",
    "lookup-gap" : "2",
    "gpu-threads" : "1",
    "kernel": "x11mod",   

These are fairly conservative settings, I just mostly copied them over from an old scrypt config and got 4x X11 rate, so I didn't bother yet to go any further. If you can get these to work you can try adjusting gpu-engine up, gpu-memclock can probably be lowered. You can also experiment with xintensity and/or thread-concurrency.

[utahjohn]

Thanks, getting 3.0MHs from 280X now.

"intensity" : "15",
"worksize" : "256",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "24576",
"shaders" : "2048",
"gpu-threads" : "4",
"gpu-engine" : "1050-1100",

GPU 67.0C
WU 0.049

Had to limit to I=15, I=16 crashes 14.4 catalyst, might try 14.6 beta I've heard it is an impressive boost in hashrate ...

Going to mess with another box now with the 7950

[utahjohn]

@PW

EDIT: I'm getting 3.1MHs consistent X11 with 280X which only did 730KHs on scrypt = 4.2X ratio ...