[ANN][AUTO-SWITCH] Profit-switch auto-exchange pool: CleverMining.com

[byt411]

Terk!

What a great day for Clevermining.  I am too excited to go to sleep, so I looked at the About the Pool page.  I see LAST 24 HOURS STATS, and LAST 30 DAYS STATS.  When will you implement NEXT 30 DAYS STATS?

Doge Tips Address:  DSJLWtjYat5vunYSXWGsQs5CXxFewAv6Mi

You cannot predict future profitability, so we cannot have next 30 days stats.

I'm new in your pool and just joined.
I have used the same config I use in other pool (changing server name)
But I am receiving a very high number of invalid:
10 accepted 38 stale/invalid ... it is ok ?
Have I to worry ?

It's ok, but just to be sure, it's better if your intensity is lower that 18.

Is there a calculator for this pool?

I have 90x R290 with total possible arround 75 MH/s.

So what to expect daily at this pool ?

I would be happy if somebody can advice me.

Thanks.

You multiply your hashrate by the pool's BTC/MHs/Day.

[guitarplinker]

I had made a simple profit calculator quite awhile ago, here's the post for it with source code: http://www.overclock.net/t/1398219/official-bitcoin-litecoin-digitalcoin-and-all-crypto-currencies-club-and-general-information-thread/15350#post_21908784

Awesome work with the new calculations, coins, and anything else that you've changed in the past while Terk - Clevermining has some awesome profitability!

[GolfCabalist]

Terk!

What a great day for Clevermining.  I am too excited to go to sleep, so I looked at the About the Pool page.  I see LAST 24 HOURS STATS, and LAST 30 DAYS STATS.  When will you implement NEXT 30 DAYS STATS?

Doge Tips Address:  DSJLWtjYat5vunYSXWGsQs5CXxFewAv6Mi

This wouldn't be possible since the alt-coin market is just as volatile as the BTC Market. You must be new to BTC and/or alt coin mining for such a question ?

OR, I'm willing to make a joke without hiding behind an emoticon 

My intent was to commend Terk by implying he has powers beyond reason.

[SavageWS6]

Hello Terk, mined 24hrs on another multi-pool, didn't make the profit I was looking at, switched to CM to see how it goes since I've been seeing people getting good results.. Let's just say It took me less than ~70% of the time I spent on the other multi-pool vs CM to earn the same amount. I is happy

[hayward96]

I have been using the configuration below, I have 3 r9 280x cards.
Over the past month I have been mining on multipool, ipominer, hashfever, and a few other pools.  My cards have been running consistantly at 720 to 760 gh each, for a total of 2.1 to 2.3 Mh.  Since I switched to CM a few days ago, my average has dropped.  Now each card is averaging around 540 and my total is avaraging 1.5 - 1.6 Mh.  I swithed to another pool for a 10 minutes today and my avereage was 2.3 again, all the settings are the same, just the pool url:port is different.
I like the profitability on CM and not having to mess with the exchanges but the 600 gh I get at other pools is a significant difference.

This is what I am using, any suggestions, I moved the intensity and gpu powertune around, didn't see any improvements.

Help!


./cgminer --scrypt -I 13 -o stratum+tcp://us.clevermining.com:3333 -u xxxxxxxxxxxxxxxxxxxxxxxxxxxxx -p anything
-g 2 -w 256 --thread-concurrency 11200 --gpu-powertune -20 --gpu-engine 1030 --gpu-memclock 1500

[SavageWS6]

I have been using the configuration below, I have 3 r9 280x cards.
Over the past month I have been mining on multipool, ipominer, hashfever, and a few other pools.  My cards have been running consistantly at 720 to 760 gh each, for a total of 2.1 to 2.3 Mh.  Since I switched to CM a few days ago, my average has dropped.  Now each card is averaging around 540 and my total is avaraging 1.5 - 1.6 Mh.  I swithed to another pool for a 10 minutes today and my avereage was 2.3 again, all the settings are the same, just the pool url:port is different.
I like the profitability on CM and not having to mess with the exchanges but the 600 gh I get at other pools is a significant difference.

This is what I am using, any suggestions, I moved the intensity and gpu powertune around, didn't see any improvements.

Help!


./cgminer --scrypt -I 13 -o stratum+tcp://us.clevermining.com:3333 -u xxxxxxxxxxxxxxxxxxxxxxxxxxxxx -p anything
-g 2 -w 256 --thread-concurrency 11200 --gpu-powertune -20 --gpu-engine 1030 --gpu-memclock 1500

Try and use another miner... Like SGMiner, CGMiner Kalroth fork and see how it does

[Capttech08]

Terk!

What a great day for Clevermining.  I am too excited to go to sleep, so I looked at the About the Pool page.  I see LAST 24 HOURS STATS, and LAST 30 DAYS STATS.  When will you implement NEXT 30 DAYS STATS?

Doge Tips Address:  DSJLWtjYat5vunYSXWGsQs5CXxFewAv6Mi

This wouldn't be possible since the alt-coin market is just as volatile as the BTC Market. You must be new to BTC and/or alt coin mining for such a question ?

OR, I'm willing to make a joke without hiding behind an emoticon 

My intent was to commend Terk by implying he has powers beyond reason.

Glad to hear! I wasn't 100% certain if you were serious or not. Glad to know you weren't

[Terk]

Today's payout will be 1h late again. This is to don't leave huge unexchanged balance for tomorrow as there is a significant amount of coins which didn't make it for 1:30am but will be ready to pay within an hour.

[mpalenciac]

Today's payout will be 1h late again. This is to don't leave huge unexchanged balance for tomorrow as there is a significant amount of coins which didn't make it for 1:30am but will be ready to pay within an hour.

Hi Terk, I haven't received today's payment yet, my wallet is: 15fqQ7a8fpugjfcQL4hj734FLvVjV8zgua
I'm not sure if it's in a queue, but just wanted to make sure.

This is the TX id that appears on your website.
2ed5b22df13ea1be3068163daa5c635f4c47f4e497d23d7f13f5501078dc1a44

When I check in blockchain it says "Transaction not found"
Thank you

[Terk]

Today's payout will be 1h late again. This is to don't leave huge unexchanged balance for tomorrow as there is a significant amount of coins which didn't make it for 1:30am but will be ready to pay within an hour.

Hi Terk, I haven't received today's payment yet, my wallet is: 15fqQ7a8fpugjfcQL4hj734FLvVjV8zgua
I'm not sure if it's in a queue, but just wanted to make sure.

This is the TX id that appears on your website.
2ed5b22df13ea1be3068163daa5c635f4c47f4e497d23d7f13f5501078dc1a44

When I check in blockchain it says "Transaction not found"
Thank you

This transaction was sent less than half an hour ago and it's simply not confirmed yet. Our payouts are huge transactions (to 1000 users/recipients at once) and they take longer time to confirm. There's nothing to worry and the transaction should get confirmed within next hour or so.

[mpalenciac]

Today's payout will be 1h late again. This is to don't leave huge unexchanged balance for tomorrow as there is a significant amount of coins which didn't make it for 1:30am but will be ready to pay within an hour.

Hi Terk, I haven't received today's payment yet, my wallet is: 15fqQ7a8fpugjfcQL4hj734FLvVjV8zgua
I'm not sure if it's in a queue, but just wanted to make sure.

This is the TX id that appears on your website.
2ed5b22df13ea1be3068163daa5c635f4c47f4e497d23d7f13f5501078dc1a44

When I check in blockchain it says "Transaction not found"
Thank you

This transaction was sent less than half an hour ago and it's simply not confirmed yet. Our payouts are huge transactions (to 1000 users/recipients at once) and they take longer time to confirm. There's nothing to worry and the transaction should get confirmed within next hour or so.

Thank you Terk!

[jaxvier]

awesome pool and just got the pay out

[Xenocyde]

I have been using the configuration below, I have 3 r9 280x cards.
Over the past month I have been mining on multipool, ipominer, hashfever, and a few other pools.  My cards have been running consistantly at 720 to 760 gh each, for a total of 2.1 to 2.3 Mh.  Since I switched to CM a few days ago, my average has dropped.  Now each card is averaging around 540 and my total is avaraging 1.5 - 1.6 Mh.  I swithed to another pool for a 10 minutes today and my avereage was 2.3 again, all the settings are the same, just the pool url:port is different.
I like the profitability on CM and not having to mess with the exchanges but the 600 gh I get at other pools is a significant difference.

This is what I am using, any suggestions, I moved the intensity and gpu powertune around, didn't see any improvements.

Help!


./cgminer --scrypt -I 13 -o stratum+tcp://us.clevermining.com:3333 -u xxxxxxxxxxxxxxxxxxxxxxxxxxxxx -p anything
-g 2 -w 256 --thread-concurrency 11200 --gpu-powertune -20 --gpu-engine 1030 --gpu-memclock 1500

You do understand the stats on the site are not synced properly to show you real-time performance? No pool can show you exact stats, many will average them based on WORK UTILITY rather. What you see in your miner is what you get with the pool, however.

I have 2 X Sapphire R9 280X Dual-X cards and I use 8192 TD because that's what's recommended by the Wiki. So my cards get 1.412 MH/s but I keep them at 1020 gpu and 1500 mem, 'coz they are a bit fussy if I push the gpu. I also undervolted them to 1137V.

Overall stats on pool show 1.4 MH/s but on a day by day average it could vary from 1.2 to 1.5, while the 10 mins stats could vary from 0.7 MH/s to 2.1 MH/s, again because the pool looks more at Work Utility rather than raw H/s. So I think you shouldn't worry about lost MH/s. This pool also takes into account rejects as well. Let your rig run for a whole week here and you'll see it all averages out to what you see in the miner program.

[nocheinfinita]

Does anyone know if I can setup my BTC-e address as my Clevermining address as well? BTC-e states they don't support generated transactions from certain pools, but I wanted to know if anyone has had any experience doing it (I don't exactly want to find out the hard way).

[Terk]

Does anyone know if I can setup my BTC-e address as my Clevermining address as well? BTC-e states they don't support generated transactions from certain pools, but I wanted to know if anyone has had any experience doing it (I don't exactly want to find out the hard way).

Yes, you can. We don't mine BTC but altcoins and exchange to BTC, so all payouts are normal transactions, not generate transactions.

[punisher1]

why ltc profitability dropped from 200%+ (few days ago) to 168% right now ?
is going to go down more ?

[pandas_talks]

why ltc profitability dropped from 200%+ (few days ago) to 168% right now ?
is going to go down more ?

it was 98% a week ago
btw, guys what coins does this multipool mine? don't know whether to mine doge or join you

[Catswold]

I have been using the configuration below, I have 3 r9 280x cards.
Over the past month I have been mining on multipool, ipominer, hashfever, and a few other pools.  My cards have been running consistantly at 720 to 760 gh each, for a total of 2.1 to 2.3 Mh.  Since I switched to CM a few days ago, my average has dropped.  Now each card is averaging around 540 and my total is avaraging 1.5 - 1.6 Mh.  I swithed to another pool for a 10 minutes today and my avereage was 2.3 again, all the settings are the same, just the pool url:port is different.
I like the profitability on CM and not having to mess with the exchanges but the 600 gh I get at other pools is a significant difference.

This is what I am using, any suggestions, I moved the intensity and gpu powertune around, didn't see any improvements.

Help!


./cgminer --scrypt -I 13 -o stratum+tcp://us.clevermining.com:3333 -u xxxxxxxxxxxxxxxxxxxxxxxxxxxxx -p anything
-g 2 -w 256 --thread-concurrency 11200 --gpu-powertune -20 --gpu-engine 1030 --gpu-memclock 1500

Clevermining isn't the problem, I have two R9 280x cards and both have been running ~710kh/s with no problems.

You might do well to play with the settings and also grab MSI Afterburner of a similar GPU controller and try running the core clock speed up and down very gradually.  Sometimes overclocking helps, sometimes underclocking works.

You might try simply removing and reinstalling the cards--sometimes that helps.

[Catswold]

why ltc profitability dropped from 200%+ (few days ago) to 168% right now ?
is going to go down more ?

it was 98% a week ago
btw, guys what coins does this multipool mine? don't know whether to mine doge or join you

Terk doesn't identify which coins are being mined.  If you want to mine DOGE, you can, but I just came from doing so and the profitability for DOGE isn't nearly what this pool is currently returning--not even with a 10% mining bonus from Ypool.

[Catswold]

why ltc profitability dropped from 200%+ (few days ago) to 168% right now ?
is going to go down more ?

Profitability on any coin or pool isn't a constant.  It fluctuates with BTC price and also dependent upon what's happening with the individual coins--pump and dump runs, spikes in value, etc.  It's impossible to maintain a given level of profitability.