[ANN] The First Litecoin PPS Pool (litecoinpool.org)

[pooler]

I'll just leave these here as a reminder.
Why doesn't the hash rate reported by the pool match that reported by my miner?
The pool keeps reporting a much lower hash rate than my miner. What's going on?

[diaahussein]

I'll just leave these here as a reminder.
Why doesn't the hash rate reported by the pool match that reported by my miner?
The pool keeps reporting a much lower hash rate than my miner. What's going on?

the thing is that the Miner report hash or 620 for the whole day but for a multiple hours it drops to 500 and then it gets back up

[tommy1033]

I'll just leave these here as a reminder.
Why doesn't the hash rate reported by the pool match that reported by my miner?
The pool keeps reporting a much lower hash rate than my miner. What's going on?

0,4 rejected
0,5 error
so its dosent make sence

[crucifixio]

It's strange.
2 days that i see that.
I configure an auto payement at 00:05
When i connect to litecoinpool at 23:05 i see on dashboard that my unpaid rewards are 0,155
When i see the payement the next morning i see a payement of 0,1400000

[pooler]

It's strange.
2 days that i see that.
I configure an auto payement at 00:05
When i connect to litecoinpool at 23:05 i see on dashboard that my unpaid rewards are 0,155
When i see the payement the next morning i see a payement of 0,1400000

I do not know your username so I'm unable to check your account, but you should make sure that you understand all of the auto-payout settings. If in doubt, write an email to support (include your username).

[robrobd]

I've been playing around with the 32-bit version for @ 2 days now.  Averaged @3.6 khash/s.  Decided to try the 64-bit version and I'm averaging @12.7 khash/s.  That's quite an impressive gain!  Just figured I'd put this out there in case anybody else now or in the future was curious about 32 vs 64 bit versions.

[Localchik11]

CSRF verification failed. Please try again

Paymemt problem, please help

[pooler]

CSRF verification failed. Please try again

Paymemt problem, please help

Resolved via email. The CSRF error is due to a Cross-Site Request Forgery prevention mechanism, which can have false positives every now and then when submitting forms, but is easily resolved by simply resubmitting the same form. It is unrelated to payments. The "payment problem" mentioned above was that the user had just changed payout address, but didn't notice the warning stating that this would suspend all payouts for 24 hours.

[troytabor]

There are some monster rigs it looks like mining. I'm curious what hardware they are using? Would any of the big rigs mind sharing their hardware?

Thanks!

Troy

[cyberdeity]

There are some monster rigs it looks like mining. I'm curious what hardware they are using? Would any of the big rigs mind sharing their hardware?

Thanks!

Troy

https://giga-watt.com/

They are currently sitting in the #3 spot I see.  Their facebook page has some additional construction photos of their mining pods/buildings.  Pretty cool stuff

https://www.facebook.com/gigawattcom/

I suspect that the top 2 listed on the stats page are renting hash power from somewhere else like NiceHash because I think they showed up around the time NiceHash came back online.  But, that's purely speculation only.

[fanten]

There are some monster rigs it looks like mining. I'm curious what hardware they are using? Would any of the big rigs mind sharing their hardware?

Thanks!

Troy

https://giga-watt.com/

They are currently sitting in the #3 spot I see.  Their facebook page has some additional construction photos of their mining pods/buildings.  Pretty cool stuff

https://www.facebook.com/gigawattcom/

I suspect that the top 2 listed on the stats page are renting hash power from somewhere else like NiceHash because I think they showed up around the time NiceHash came back online.  But, that's purely speculation only.

There are too much anonymous from nicehash. Do you think all of them are coming form nicehash? This large amount of hashrate is making the difficulty sky rocket. I think the difficulty increased quite a lot after nicehash was put down.

[lennyNO]

>> There are some monster rigs it looks like mining. I'm curious what hardware they are using? Would any of the big rigs mind sharing their hardware?

Yeah #1 is using almost 4% of the total LTC hashing power, that's monstrous. It is the equivalent of ca 8000 L3+'s !

>> This large amount of hashrate is making the difficulty sky rocket. I think the difficulty increased quite a lot after nicehash was put down

The current global LTC hashrate sits at ca 100Th/s and has been stable for the last 2 weeks, but jumped by more than 100% compared to earlier. I thought not before March there is a next batch of L3+'s hitting the market??

[MarcusAurelius69]

Hi all, I'm pretty new to the LTC mining world. I purchased a moonlander 2 usb miner that gives me about 4.5M/s. It sucks but it turns a small profit. I'm looking to buy an L3+ but I also don't want to wait until March to get it. Are there any sites that you have purchased from other than bitmain? I stumbled upon cryptohardwareshop.net and was immediately skeptical of their much lower prices and only accepting BTC and ethereum. I contacted their supposed payment dept about paying with credit cards and they said they disabled them a couple months ago. A scam tracker website noted that the domain has only been registered for a few weeks at most so this seems bogus. Has anyone purchased gear from here?

I would also welcome feedback as to whether or not it would be worth it to buy a couple more moonlander 2's even though they are very slow.

[Jacktgns]

Hi, I have a confusion or doubt with the statistics, I have 2 l3+ mining with litecoinpool, in theory my contribution is 1000MH/s. in statistics I always see what I should do 0.1 LTC/d, of course I can not see the next number, it would be clearer if the statistics showed me 0.1x for example, Is there any way to see more accurately the projected earnings per day?
https://prnt.sc/ht56jk
https://prnt.sc/ht56rl

[smilinj]

L3+ will not connect to litecoinpool 3443
stratum+tcp://us2.litecoinpool.org:3443

I receive the following kernel log error:
unable to resolve host.  But it connects no problem to 3333  Any ideas?

[Jacktgns]

L3+ will not connect to litecoinpool 3443
stratum+tcp://us2.litecoinpool.org:3443

I receive the following kernel log error:
unable to resolve host.  But it connects no problem to 3333  Any ideas?

hi, my 2 l3+ are configured on port 3333 and work without problem
(stratum+tcp://us.litecoinpool.org:3333)
Do you have any reason to use port 3443?

[tommy1033]

i think the only reason for having different ports is just if you got that port blocked by your internet provider you can swap port and continue mining

[Jacktgns]

is anyone else getting slow hashrate on this pool ? my BFGminer shows 290 but im only getting around 250, been like that the last 2-3 days , had a steady 288-290 avareage before that

Hi, I've also seen slow hashrate in my 2 miners, always below 500 and before they were always above 500, something change?

[tommy1033]

is anyone else getting slow hashrate on this pool ? my BFGminer shows 290 but im only getting around 250, been like that the last 2-3 days , had a steady 288-290 avareage before that

Hi, I've also seen slow hashrate in my 2 miners, always below 500 and before they were always above 500, something change?

gotta be a change in the last week or so , i had a 290 mhs/24 hour and not im lucky if i go above 240
and nothing have changed , no burnt boards , no change in settings.

[Jacktgns]

is anyone else getting slow hashrate on this pool ? my BFGminer shows 290 but im only getting around 250, been like that the last 2-3 days , had a steady 288-290 avareage before that

Hi, I've also seen slow hashrate in my 2 miners, always below 500 and before they were always above 500, something change?

gotta be a change in the last week or so , i had a 290 mhs/24 hour and not im lucky if i go above 240
and nothing have changed , no burnt boards , no change in settings.

yeap same Issue.