GAW Community is located at: community.gawminers.com

[EasyME]

or do another double hash promotion... I Really enjoyed that promo.

[Cassey]

I just received my GAW Fury and am getting 0 hash rate because zenminer is down and there is no other option at this time to start mining. When will site be up? And how about software that I can run with no service.

Scroll back a bunch and they posted the link to download a version of CGminer that works.

[Mad Macs]

I just received my GAW Fury and am getting 0 hash rate because zenminer is down and there is no other option at this time to start mining. When will site be up? And how about software that I can run with no service. I feel like this may be a scam.

Go here:

https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config?utm_source=Customer+List&utm_campaign=fe44872274-zenminer-server-status&utm_medium=email&utm_term=0_610f65bd5c-fe44872274-130325241

[xspeed9190]

What kinda hash rate are you guys getting with the fury?

[Mad Macs]

Been there, but no instructions and contacted support but no reply.

Those ARE the instructions along with the executable downloads.

[vabchgent]

Been there, but no instructions and contacted support but no reply.

on this site go near bottom of page and download CGminer

https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config?utm_source=Customer+List&utm_campaign=fe44872274-zenminer-server-status&utm_medium=email&utm_term=0_610f65bd5c-fe44872274-130325241


create config file and mine. the examples are at the top of the page

cgminer.exe -o stratum+tcp://us.clevermining.com:3333(change to your pool settings) -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8(change to username for your pool) -p x(change to pass for your pool) --nocheck-golden --chips-count 128(change to type below by miner) --ltc-clk 328 -S //./COM4(change to comport of miner)


Chip Count

War Machine: 256

Falcon: 128

Black Widow: 64

Fury: 6

[healthandwealth]

Just wanted to chime in that Luke is awesome!! Super fast response once he picks up the tickets.

I'll second that.  Am having some issues with my hosted sets of gridseeds yesterday/today but he's helped out quite a bit.   

[___TR___]

Been there, but no instructions and contacted support but no reply.

on this site go near bottom of page and download CGminer

https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config?utm_source=Customer+List&utm_campaign=fe44872274-zenminer-server-status&utm_medium=email&utm_term=0_610f65bd5c-fe44872274-130325241


create config file and mine. the examples are at the top of the page

cgminer.exe -o stratum+tcp://us.clevermining.com:3333(change to your pool settings) -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8(change to username for your pool) -p x(change to pass for your pool) --nocheck-golden --chips-count 128(change to type below by miner) --ltc-clk 328 -S //./COM4(change to comport of miner)


Chip Count

War Machine: 256

Falcon: 128

Black Widow: 64

Fury: 6

How do I find the com port of miner?

[Cali_LiteCoin]

Hi guys!! My Fury miner doesnt work with cgminer for windows. I try to contact support, but still waiting(((. I explain what i did.
1.  Download windows.zip
2. Made cgminer.bat file
3. Put my pool information , chip count change to 6
4. Plug in usb from Fury miner to my laptop and turn on power
5. Start Cgminer.bat ............  1 sec black window with smth after close
What im doing wrong guys? Sorry I dont have a lot experience with mining
My example
cgminer.exe -o stratum+tcp://doge.ghash.io:3333 -u monastik80.ghash -p Vladivostok1989 --nocheck-golden --chips-count 6 --ltc-clk 6 -S //./COM4

[volder]

Hi guys!! My Fury miner doesnt work with cgminer for windows. I try to contact support, but still waiting(((. I explain what i did.
1.  Download windows.zip
2. Made cgminer.bat file
3. Put my pool information , chip count change to 6
4. Plug in usb from Fury miner to my laptop and turn on power
5. Start Cgminer.bat ............  1 sec black window with smth after close
What im doing wrong guys? Sorry I dont have a lot experience with mining

Is there a driver? Did you input the right com port?

[volder]

Been there, but no instructions and contacted support but no reply.

on this site go near bottom of page and download CGminer

https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config?utm_source=Customer+List&utm_campaign=fe44872274-zenminer-server-status&utm_medium=email&utm_term=0_610f65bd5c-fe44872274-130325241


create config file and mine. the examples are at the top of the page

cgminer.exe -o stratum+tcp://us.clevermining.com:3333(change to your pool settings) -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8(change to username for your pool) -p x(change to pass for your pool) --nocheck-golden --chips-count 128(change to type below by miner) --ltc-clk 328 -S //./COM4(change to comport of miner)


Chip Count

War Machine: 256

Falcon: 128

Black Widow: 64

Fury: 6

How do I find the com port of miner?

Windows device manager.

[___TR___]

Been there, but no instructions and contacted support but no reply.

on this site go near bottom of page and download CGminer

https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config?utm_source=Customer+List&utm_campaign=fe44872274-zenminer-server-status&utm_medium=email&utm_term=0_610f65bd5c-fe44872274-130325241


create config file and mine. the examples are at the top of the page

cgminer.exe -o stratum+tcp://us.clevermining.com:3333(change to your pool settings) -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8(change to username for your pool) -p x(change to pass for your pool) --nocheck-golden --chips-count 128(change to type below by miner) --ltc-clk 328 -S //./COM4(change to comport of miner)


Chip Count

War Machine: 256

Falcon: 128

Black Widow: 64

Fury: 6

How do I find the com port of miner?

Windows device manager.

does not show com port number only shows Port_#0004.Hub_#0006

[happydaze]

Might need  CP210x USB to UART Bridge Virtual COM Port (VCP) drivers
http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx

[___TR___]

Might need  CP210x USB to UART Bridge Virtual COM Port (VCP) drivers
http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx

Already installed

I have windows 8 and there is no listing for com ports in device manager

[vabchgent]

Been there, but no instructions and contacted support but no reply.

on this site go near bottom of page and download CGminer

https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config?utm_source=Customer+List&utm_campaign=fe44872274-zenminer-server-status&utm_medium=email&utm_term=0_610f65bd5c-fe44872274-130325241


create config file and mine. the examples are at the top of the page

cgminer.exe -o stratum+tcp://us.clevermining.com:3333(change to your pool settings) -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8(change to username for your pool) -p x(change to pass for your pool) --nocheck-golden --chips-count 128(change to type below by miner) --ltc-clk 328 -S //./COM4(change to comport of miner)


Chip Count

War Machine: 256

Falcon: 128

Black Widow: 64

Fury: 6

How do I find the com port of miner?

Windows device manager.

does not show com port number only shows Port_#0004.Hub_#0006

Did you have cgminer with gridseeds running off this machine before and is you miner showing up under ports com and lpt  or somewhere else. Do you remember installing zadig drivers.  

Check this thread remember its easier to add these drivers then to remove them so please read. Thanks
http://cryptomining-blog.com/1254-how-to-mine-both-btc-and-ltc-on-gridseed-5-chip-gc3355-asic/

Also remember miners usually prefer usb 2.0 black ports and not blue 3.0 ports

[milesbitcoin]

Been there, but no instructions and contacted support but no reply.

on this site go near bottom of page and download CGminer

https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config?utm_source=Customer+List&utm_campaign=fe44872274-zenminer-server-status&utm_medium=email&utm_term=0_610f65bd5c-fe44872274-130325241


create config file and mine. the examples are at the top of the page

cgminer.exe -o stratum+tcp://us.clevermining.com:3333(change to your pool settings) -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8(change to username for your pool) -p x(change to pass for your pool) --nocheck-golden --chips-count 128(change to type below by miner) --ltc-clk 328 -S //./COM4(change to comport of miner)


Chip Count

War Machine: 256

Falcon: 128

Black Widow: 64

Fury: 6

How do I find the com port of miner?

Windows device manager.

does not show com port number only shows Port_#0004.Hub_#0006

Did you have cgminer with gridseeds running off this machine before and is you miner showing up under ports com and lpt  or somewhere else. Do you remember installing zadig drivers.  

Check this thread remember its easier to add these drivers then to remove them so please read. Thanks
http://cryptomining-blog.com/1254-how-to-mine-both-btc-and-ltc-on-gridseed-5-chip-gc3355-asic/

Also remember miners usually prefer usb 2.0 black ports and not blue 3.0 ports

Try replacing the drivers with the lighting asic driver for cpuminer. They will assign a com port. Just a guess I haven't received my miner to test. http://www.diffpair.com/lightningasic/
So do so at ur own risk.

[JPS2K5]

Might need  CP210x USB to UART Bridge Virtual COM Port (VCP) drivers
http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx

Already installed

I have windows 8 and there is no listing for com ports in device manager

Go to device manager. If you don't see a COM port listed, you should see something like 'CP2102 USB to UART Bridge Controller' under 'Universal Serial Bus Devices'. This means you need the virtual COM-port driver, wich is at http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx

If you still see nothing, unplug en replug the device.

If you have old (Zadig) drivers installed, uninstall them. If you accidentally installed them to get this miner running, right-click the device, choose uninstall, choose úninstall driver.

[___TR___]

Might need  CP210x USB to UART Bridge Virtual COM Port (VCP) drivers
http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx

Already installed

I have windows 8 and there is no listing for com ports in device manager

Go to device manager. If you don't see a COM port listed, you should see something like 'CP2102 USB to UART Bridge Controller' under 'Universal Serial Bus Devices'. This means you need the virtual COM-port driver, wich is at http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx

If you still see nothing, unplug en replug the device.

If you have old (Zadig) drivers installed, uninstall them. If you accidentally installed them to get this miner running, right-click the device, choose uninstall, choose úninstall driver.

I uninstalled all old drivers and the re installed them and now hashing away. Getting 1.3mh/s poolside

Thanks to everyone for the help.

[heathcoin]

Might need  CP210x USB to UART Bridge Virtual COM Port (VCP) drivers
http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx

Already installed

I have windows 8 and there is no listing for com ports in device manager

Go to device manager. If you don't see a COM port listed, you should see something like 'CP2102 USB to UART Bridge Controller' under 'Universal Serial Bus Devices'. This means you need the virtual COM-port driver, wich is at http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx

If you still see nothing, unplug en replug the device.

If you have old (Zadig) drivers installed, uninstall them. If you accidentally installed them to get this miner running, right-click the device, choose uninstall, choose úninstall driver.

I uninstalled all old drivers and the re installed them and now hashing away. Getting 1.3mh/s poolside

Thanks to everyone for the help.

That's great to hear!  ...also thanks to everyone who helped out as I'm sure this will probably help others as well.  I'm a Week 2 customer... so learning things now is really helping me!

[tonytre]

So I just got home from work to see the login link doesn't even work on Zen's site. I downloaded the 3.1.1 succesfully on Ubuntu 12.04, but was hoping I could get some help here on how to run the Fury. I am also pretty novice when it comes to all of this. I run my gpu's just by typing ./sgminer/mine.sh, and run my gridseeds by plugging this straight into the terminal...sudo ./cpuminer/minerd --freq=850 --gc3355=/dev/ttyACM0  --url=stratum+tcp://stratum.simpledoge.com:3334 --userpass=xxxxxx.gridseed:x

Could someone help me figure out how to get the fury running and what I have to do now that cgminer3.1.1. is installed. Thanks!