GAW Community is located at: community.gawminers.com

[milesbitcoin]

It's the Fury.  The pool seems accurate (a bit low though), but cgminer is way high.  Did I miss something?

Thanks!

Anyone else getting weird output from their miner under windows?  I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

What miner is it?

Does it still show the same figures after running for a bit. Or how long has it been running.

[mrv777]

It's been running for about 30 minutes now.  I just realized I forgot to mention that it is running on Windows in a VM that is on a Mac computer (Couldn't figure out how to make it mine in OSX).  Not sure if that could be an issue.

Thanks!

It's the Fury.  The pool seems accurate (a bit low though), but cgminer is way high.  Did I miss something?

Thanks!

Anyone else getting weird output from their miner under windows?  I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

What miner is it?

Does it still show the same figures after running for a bit. Or how long has it been running.

[milesbitcoin]

It's been running for about 30 minutes now.  I just realized I forgot to mention that it is running on Windows in a VM that is on a Mac computer (Couldn't figure out how to make it mine in OSX).  Not sure if that could be an issue.

Thanks!

It's the Fury.  The pool seems accurate (a bit low though), but cgminer is way high.  Did I miss something?

Thanks!

Anyone else getting weird output from their miner under windows?  I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

What miner is it?

Does it still show the same figures after running for a bit. Or how long has it been running.

Can you post your config file? Minus you pool info.

[cryptofunk]

Got my Widow today, how excited I was until I realized it is DOA.... F***!

[milesbitcoin]

Got my Widow today, how excited I was until I realized it is DOA.... F***!

I am sure GAW will make it right for you. Just a thought what PSU are you trying to run it on?

[mrv777]

It's been running for about 30 minutes now.  I just realized I forgot to mention that it is running on Windows in a VM that is on a Mac computer (Couldn't figure out how to make it mine in OSX).  Not sure if that could be an issue.

Thanks!

It's the Fury.  The pool seems accurate (a bit low though), but cgminer is way high.  Did I miss something?

Thanks!

Anyone else getting weird output from their miner under windows?  I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

What miner is it?

Does it still show the same figures after running for a bit. Or how long has it been running.

Can you post your config file? Minus you pool info.

Haha, I found the problem when looking at my config.  I still had:

--chips-count 128

instead of changing it to:

--chips-count 6

 
Thank you for the help

[milesbitcoin]

It's been running for about 30 minutes now.  I just realized I forgot to mention that it is running on Windows in a VM that is on a Mac computer (Couldn't figure out how to make it mine in OSX).  Not sure if that could be an issue.

Thanks!

It's the Fury.  The pool seems accurate (a bit low though), but cgminer is way high.  Did I miss something?

Thanks!

Anyone else getting weird output from their miner under windows?  I just set my up and I see this:
(5s):28.69M (avg):28.81Mh/s | A:115 | R:0 | HW:10 | U: 2.5/m WU: 1331.6/m

The pool is saying this:

Your current Hashrate: 1004 kH/s

What miner is it?

Does it still show the same figures after running for a bit. Or how long has it been running.

Can you post your config file? Minus you pool info.

Haha, I found the problem when looking at my config.  I still had:

--chips-count 128

instead of changing it to:

--chips-count 6

 
Thank you for the help

Thats what I was looking for. Some times the smallest things cause the biggest problem.

[vabchgent]

To all if your order is coming DHL they want a signature. They said if you put your tracking number and name on a piece of paper and ask them to leave it they have no problems with leaving it. I had to leave work early to pick up my first fury.

[cryptofunk]

Got my Widow today, how excited I was until I realized it is DOA.... F***!

I am sure GAW will make it right for you. Just a thought what PSU are you trying to run it on?

Brand new Corsair CX750M, I also gave it a try on a RM750.  But PSUs are confirmed to be working... I gave both a try in one of my GPU rig to make sure I didn't get a bad one after the Widow wouldn't start.  As soon as I plug the Widow the PSU refuses to start, if I unplug the Widow the PSU operates as intended (did that with both PSUs), on the positive side the PSU can power the ZenController no problem LOL.

[milesbitcoin]

Got my Widow today, how excited I was until I realized it is DOA.... F***!

I am sure GAW will make it right for you. Just a thought what PSU are you trying to run it on?

Brand new Corsair CX750M, I also gave it a try on a RM750.  But PSUs are confirmed to be working... I gave both a try in one of my GPU rig to make sure I didn't get a bad one after the Widow wouldn't start.  As soon as I plug the Widow the PSU refuses to start, if I unplug the Widow the PSU operates as intended (did that with both PSUs), on the positive side the PSU can power the ZenController no problem LOL.

Alright,

I only ask had an issue with running Antminer S1 of CoolMax 700W, because it requires a dedicated 5V draw "the PSU does" to remain running at startup. (Work around was to plug hard drive or CD ROM drive into one of the 4 pin connections, along with the S1 and it stayed running).

So I was just checking to see if it was a similar situation.

[mbauman89]

Well my package is in NJ and has been updated to -With delivery courier so idk if that means its out for delievery and ill get it today or if it means something else. I really hope it comes today!!!

It should mean it's out for delivery, congrats!!
Mine just came from DHL, but my zenminer doesn't seem to be able to register yet and I can't get cgminer working on my mac...so I still have to wait  

Mine also went to "With delivery courier" and then "Delivery attempted; recipient not home" - Sad... I was hoping they would leave it without a signature. I guess tomorrow is another day.

Woohoo a wonderful yellow van just left my house and my black widow is delivered! Now to set it up....

[vabchgent]

is there a zen miner Q&A  anywhere. I connected my miner and was getting 500+ KHS  when connected to them. When running free willey on my laptop 1300KHS then some.

[mbauman89]

Got my Widow today, how excited I was until I realized it is DOA.... F***!

I am sure GAW will make it right for you. Just a thought what PSU are you trying to run it on?

Brand new Corsair CX750M, I also gave it a try on a RM750.  But PSUs are confirmed to be working... I gave both a try in one of my GPU rig to make sure I didn't get a bad one after the Widow wouldn't start.  As soon as I plug the Widow the PSU refuses to start, if I unplug the Widow the PSU operates as intended (did that with both PSUs), on the positive side the PSU can power the ZenController no problem LOL.

Are you jumping the green and black wire on the 24pin connector? Cause theres no motherboard you need to make the psu power on.

[Cassey]

[
Actually, could you include at least the coin being mined?  I know performance can change based on these things and I definitely want to know if it is picky like the Gridseed chips (i.e., my blades like LTC but hate DOGE, meanwhile my 5chips are happy on any old multipool).  Compiling a list of the friendliest 'Coins, or even pools, for the chips performance-wise would be a good thing.

FYI - I'm pretty happy with both my Gridseeds and Fury over at www.multicoinpool.org.  Daniel, the sysop, has been coding like crazy to turn his site into the "Burger King" of pools - you can do it your way!  He has normal userid/password mining, profit switching mining, exploratory coins (assign your miners to work just certain coins), BCT address no-account mining, autotrading via Cryptsy (with Poloniex support coming soon).  In any case, I'm obviously a fan and enjoy seeing him improve his site.

[chrison999]

Everything is brand new and things have been a little bumpy...

That's the understatement of the year, reactor!      

I'm not going to get into a litany of all the foul-ups there's been with my order cuz that's all water under the bridge.  All I want is for my miners to arrive so I can hook them up and get started mining.  My initial plan was to use a wifi dongle as reactor pointed me to.  Now it seems I can't do that if I use the free, included (thanks again GAW!) rapsberry pi controller and zenminer.  Frankly, that's ok by me because I never knew I was getting a free (thanks yet again GAW!) raspberry pi or knew zenminer existed until 2 days ago.

So, I'll ask again...

When DHL finally quits bouncing my shipment all over north america and I get my gear, can I do either one of the following options:

• flash the raspberry pi o/s and GAW cgminer software to another card and hook the furys to that and run them off of wifi?

OR

• hook everything to the linux system currently running my 3 gridseeds via wifi, download/compile/install the GAW cgminer, and run everything using wifi off of that?

And, most important, if I do either of those 2 options can I expect any support from GAW or is the zenminer route the only one GAW is going to be supporting?

Again, thanks to everyone who offers help and suggestions.  I really will feel better once my shi....  uhhh...  stuff gets here and I can finally get this going.

Regards,

Chris

[zenMiner_Eric]

is there a zen miner Q&A  anywhere. I connected my miner and was getting 500+ KHS  when connected to them. When running free willey on my laptop 1300KHS then some.

Not an uncommon issue, but usually easy to fix! Shoot us an email at support@zenminer.com with the details of your issue and we'll get right on it.

[GAW Miners_CEO]

@reactor

Send you a PM

[GAW Miners_CEO]

Guys,

I will have them make wifi support a priority

[Cassey]

When DHL finally quits bouncing my shipment all over north america and I get my gear, can I do either one of the following options:

• flash the raspberry pi o/s and GAW cgminer software to another card and hook the furys to that and run them off of wifi?

OR

• hook everything to the linux system currently running my 3 gridseeds via wifi, download/compile/install the GAW cgminer, and run everything using wifi off of that?

And, most important, if I do either of those 2 options can I expect any support from GAW or is the zenminer route the only one GAW is going to be supporting?

Again, thanks to everyone who offers help and suggestions.  I really will feel better once my shi....  uhhh...  stuff gets here and I can finally get this going.

Regards,

Chris

There is no reason you can't burn your favorite Linux distro on an SDHC card and replace the zenminer one.  That is all the "personality" the PI has.  I run two PIs on a custom Gentoo Distribution I built.  No issues.

I would suggest you burn a new SDHC so you have the zenminer one to fall back to.

[rrob]

Gaw, can you look into my recent orders and provide a tracking number for my Week 1 Fury's? Called and opened a ticket, but no answer yet what is going on.

ORDER #5812 & #6252


Thanks,
Rob