|
vabchgent
|
 |
May 29, 2014, 07:31:43 PM |
|
@ GAW the power supplies they sent with the furys is getting a little toasty. You might want to ask them to send 6 or 7A instead of 5A Just a heads up.
|
|
|
|
chrisnewby91
Newbie
 Offline
Activity: 28
Merit: 0
|
|
May 29, 2014, 07:32:13 PM |
|
Hi
can anybody please help me I have just received my fury today but no zencontroller yet. I have no idea how to run it with cgminer3.1.1 I have the right driver installed but I do not know how to build a miner. when I had gridseeds I just watched some youtube tutorials and downloaded cgminer and it was ready to use. can anybody please help it will be much appreciated
create a miner.bat file in inside the cgminer folder. Copy the code below into the .bat file and change the pool address, user name and password to match where you want to mine. Open device manager and find the com port of the fury, change the COM port in .bat file to match. Save and double click the miner.bat file. example: cgminer.exe -o stratum+tcp://us.clevermining.com:3333 -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8 -p x --nocheck-golden --chips-count 6 --ltc-clk 328 -S //./COM4 thanks but still having no luck I got cgminer from https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config?utm_source=Customer+List&utm_campaign=fe44872274-zenminer-server-status&utm_medium=email&utm_term=0_610f65bd5c-fe44872274-130325241 I don't know what else I need to do I soon as I open the bat file it closes again any other ideas? thanks again |
|
|
|
|
chrisnewby91
Newbie
Offline
Activity: 28
Merit: 0
|
|
May 29, 2014, 07:37:53 PM |
|
thanks but already done that. the drive that is installed is silicone labs cp210 com17 still can't get it to work |
|
|
|
|
milesbitcoin
Newbie
Offline
Activity: 56
Merit: 0
|
|
May 29, 2014, 07:42:20 PM |
|
thanks but already done that. the drive that is installed is silicone labs cp210 com17 still can't get it to work Try placing the full path to the cgminer.exe in quotes in the .bat file Example "C:\....\cgminer.exe" also you can add "pause" at the end of your bat file to see what it is doing when it opens. Pause without quotes. |
|
|
|
|
mbauman89
Full Member
Offline
Activity: 345
Merit: 100
https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T
|
|
May 29, 2014, 07:55:28 PM |
|
Im having the same problem. I installed the driver linked above and when i click on my .bat file it opens quick and i can see all devices disabled, cannot mine.
|
Wagabet - bitcoin casino with new game mechanics and nice designe!
|
|
|
|
vabchgent
|
|
May 29, 2014, 07:57:02 PM |
|
Hi
can anybody please help me I have just received my fury today but no zencontroller yet. I have no idea how to run it with cgminer3.1.1 I have the right driver installed but I do not know how to build a miner. when I had gridseeds I just watched some youtube tutorials and downloaded cgminer and it was ready to use. can anybody please help it will be much appreciated
create a miner.bat file in inside the cgminer folder. Copy the code below into the .bat file and change the pool address, user name and password to match where you want to mine. Open device manager and find the com port of the fury, change the COM port in .bat file to match. Save and double click the miner.bat file. example: cgminer.exe -o stratum+tcp://us.clevermining.com:3333 -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8 -p x --nocheck-golden --chips-count 6 --ltc-clk 328 -S //./COM4 When you created the bat fie did you change the comport in it. Change com4 to com17 thanks but still having no luck I got cgminer from https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config?utm_source=Customer+List&utm_campaign=fe44872274-zenminer-server-status&utm_medium=email&utm_term=0_610f65bd5c-fe44872274-130325241 I don't know what else I need to do I soon as I open the bat file it closes again any other ideas? thanks again Download and insall Silicone Labs CP210 Windows Drivers for the device here: http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspxReboot and try again. thanks but already done that. the drive that is installed is silicone labs cp210 com17 still can't get it to work [/quote] On the end of the bat file did you change com4 to com17 |
|
|
|
NZero
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 29, 2014, 07:57:25 PM |
|
All you have to is the drop the funny business at the end with slashes on the COM port. This worked for me
cgminer.exe -o stratum+tcp://us-east.rapidhash.net:3333 -u FURY -p PASS --nocheck-golden --chips-count 6 --ltc-clk 328 -S COM4
If that doesn't work, let me know and I'll help you out the best I can.
I accept tips!
Doge: D7gbtQn2Fpd1nME2TK5E9WnZjMkvmTm5yn
|
|
|
|
|
chrisnewby91
Newbie
Offline
Activity: 28
Merit: 0
|
|
May 29, 2014, 08:05:48 PM |
|
Hi
can anybody please help me I have just received my fury today but no zencontroller yet. I have no idea how to run it with cgminer3.1.1 I have the right driver installed but I do not know how to build a miner. when I had gridseeds I just watched some youtube tutorials and downloaded cgminer and it was ready to use. can anybody please help it will be much appreciated
create a miner.bat file in inside the cgminer folder. Copy the code below into the .bat file and change the pool address, user name and password to match where you want to mine. Open device manager and find the com port of the fury, change the COM port in .bat file to match. Save and double click the miner.bat file. example: cgminer.exe -o stratum+tcp://us.clevermining.com:3333 -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8 -p x --nocheck-golden --chips-count 6 --ltc-clk 328 -S //./COM4 When you created the bat fie did you change the comport in it. Change com4 to com17 thanks but still having no luck I got cgminer from https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config?utm_source=Customer+List&utm_campaign=fe44872274-zenminer-server-status&utm_medium=email&utm_term=0_610f65bd5c-fe44872274-130325241 I don't know what else I need to do I soon as I open the bat file it closes again any other ideas? thanks again Download and insall Silicone Labs CP210 Windows Drivers for the device here: http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspxReboot and try again. thanks but already done that. the drive that is installed is silicone labs cp210 com17 still can't get it to work On the end of the bat file did you change com4 to com17 [/quote] yes think I have it sorted now the problem was I didn't put the windows file in with the cgminer file wouldn't of figured that out without the pause function many thanks. does anybody how I can post a image to see if this is how it should be? |
|
|
|
|
chrisnewby91
Newbie
Offline
Activity: 28
Merit: 0
|
|
May 29, 2014, 08:17:57 PM |
|
Hi
can anybody please help me I have just received my fury today but no zencontroller yet. I have no idea how to run it with cgminer3.1.1 I have the right driver installed but I do not know how to build a miner. when I had gridseeds I just watched some youtube tutorials and downloaded cgminer and it was ready to use. can anybody please help it will be much appreciated
create a miner.bat file in inside the cgminer folder. Copy the code below into the .bat file and change the pool address, user name and password to match where you want to mine. Open device manager and find the com port of the fury, change the COM port in .bat file to match. Save and double click the miner.bat file. example: cgminer.exe -o stratum+tcp://us.clevermining.com:3333 -u 1KQxLLQNxgn2upd4TtGbtiRdm3f5UWC9k8 -p x --nocheck-golden --chips-count 6 --ltc-clk 328 -S //./COM4 When you created the bat fie did you change the comport in it. Change com4 to com17 thanks but still having no luck I got cgminer from https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config?utm_source=Customer+List&utm_campaign=fe44872274-zenminer-server-status&utm_medium=email&utm_term=0_610f65bd5c-fe44872274-130325241 I don't know what else I need to do I soon as I open the bat file it closes again any other ideas? thanks again Download and insall Silicone Labs CP210 Windows Drivers for the device here: http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspxReboot and try again. thanks but already done that. the drive that is installed is silicone labs cp210 com17 still can't get it to work On the end of the bat file did you change com4 to com17 yes think I have it sorted now the problem was I didn't put the windows file in with the cgminer file wouldn't of figured that out without the pause function many thanks. does anybody how I can post a image to see if this is how it should be? Select your CGMiner alt + print screen imgur.com ctrl + v post the link here  [/quote] thanks again really appreciate it http://imgur.com/IwsteRI |
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4298
Merit: 8768
'The right to privacy matters'
|
|
May 29, 2014, 08:22:39 PM |
|
okay first question I have is who has a working fury/zenminer in hand?
if you do what power does it pull? what does it hash?
I have played the new gear time over and over and over and over.
I decided to
a ) wait for real world reports on zemminer - gaw miner combo's
next question is their a support thread for this on this site.
It would be in script/alt coins. but a thread with all of the new gaw miners would be good.
I have no gaw miners justs grid seeds 5 chip and blades.
A nice setup thread with the units would be helpful
the fury
the widow
the falcon
the war machine
the zen controller
I am quoting my self as I am looking for this idea to take off. 1) the fury runs at 1.3mh with 40 watts https://bitcointalk.org/index.php?topic=529093.msg7007242#msg7007242 from _____TR________ question to _____TR______ what is your power source a brick or an atx PSU with some pcie adapter cords? I ask because watts WITH A BRICK would be much higher then with a plat atx psu. So 40 watts is good if it is a brick . Since I think a plat psu with pcie adapters would do 32-35 watts 2) the widow we have a video and unboxing of the widow here. http://hoosierminer.com/gawminer-black-widow-unboxing/looks like a 16.6 mh hash rate But I can read the power meter or the hash rate well more info please 3) the falcon 4) the war machine 5)zen controller so please quote and add info to the 5 above. we can use this to organize a support thread. |
|
|
|
DriverDan
Newbie
Offline
Activity: 18
Merit: 0
|
|
May 29, 2014, 08:26:34 PM |
|
Got my Widow today, how excited I was until I realized it is DOA.... F***!
I am sure GAW will make it right for you. Just a thought what PSU are you trying to run it on? Brand new Corsair CX750M, I also gave it a try on a RM750. But PSUs are confirmed to be working... I gave both a try in one of my GPU rig to make sure I didn't get a bad one after the Widow wouldn't start. As soon as I plug the Widow the PSU refuses to start, if I unplug the Widow the PSU operates as intended (did that with both PSUs), on the positive side the PSU can power the ZenController no problem LOL. I am having the same problem with my Falcon. Raidmax 850W PSU taken from a working GPU miner will not turn on with any of the ASIC boards plugged in. Even if I connected the ATX and MB plugs to a working system and plug in the ASICs it refuses to turn on. Tried plugging only one board in, same result. PSU chirps and doesn't turn on. Mine had some physical damage to the back of the case and some loose screws but no visible damage to the boards. |
|
|
|
|
mbauman89
Full Member
Offline
Activity: 345
Merit: 100
https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T
|
|
May 29, 2014, 08:30:15 PM
Last edit: May 29, 2014, 08:41:28 PM by mbauman89 |
|
this is beyond pissing me off. I tried using the zencontroller and that isnt working. Just sits on searching for zencontroller on the website. and here is my .bat file
cgminer.exe -o stratum+tcp://power.wemineltc.com:3333 -u user.worker -p x --nocheck-golden --chips-count 64 --ltc-clk 328 -S COM17 (also tried COM4 with and without the slashes)
CGMiner says something like icarnus failed to open COM(Whatever i put in 4 or 17)
Then says All devices disabled, cannot mine
Seriouesly what is the problem? Ive never had so much trouble with a single miner!!!
|
Wagabet - bitcoin casino with new game mechanics and nice designe!
|
|
|
mbauman89
Full Member
Offline
Activity: 345
Merit: 100
https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T
|
|
May 29, 2014, 08:43:19 PM |
|
this is beyond pissing me off. I tried using the zencontroller and that isnt working. Just sits on searching for zencontroller on the website. and here is my .bat file
cgminer.exe -o stratum+tcp://power.wemineltc.com:3333 -u user.worker -p x --nocheck-golden --chips-count 64 --ltc-clk 328 -S COM17 (also tried COM4 with and without the slashes)
CGMiner says something like icarnus failed to open COM(Whatever i put in 4 or 17)
Then says All devices disabled, cannot mine
Seriouesly what is the problem? Ive never had so much trouble with a single miner!!!
editted my post and what do you mean add pause to my .bat?? |
Wagabet - bitcoin casino with new game mechanics and nice designe!
|
|
|
mbauman89
Full Member
Offline
Activity: 345
Merit: 100
https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T
|
|
May 29, 2014, 08:44:42 PM |
|
think i got it. Had it listed under Com3 so i edited my .bat and that was it. Seems to be mining away!
|
Wagabet - bitcoin casino with new game mechanics and nice designe!
|
|
|
chrisnewby91
Newbie
Offline
Activity: 28
Merit: 0
|
|
May 29, 2014, 08:46:16 PM |
|
this is beyond pissing me off. I tried using the zencontroller and that isnt working. Just sits on searching for zencontroller on the website. and here is my .bat file
cgminer.exe -o stratum+tcp://power.wemineltc.com:3333 -u user.worker -p x --nocheck-golden --chips-count 64 --ltc-clk 328 -S COM17 (also tried COM4 with and without the slashes)
CGMiner says something like icarnus failed to open COM(Whatever i put in 4 or 17)
Then says All devices disabled, cannot mine
Seriouesly what is the problem? Ive never had so much trouble with a single miner!!!
editted my post and what do you mean add pause to my .bat?? at the end of your bat file press enter twice then type in pause save it. when you run it you will get to see the error message |
|
|
|
|
mbauman89
Full Member
Offline
Activity: 345
Merit: 100
https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T
|
|
May 29, 2014, 08:48:53 PM
Last edit: May 29, 2014, 09:03:31 PM by mbauman89 |
|
my black widow only mining at 8Mh/s..... hopefully it will go up. and good to know about the pause trick. i was clicking it a thousand times to try and read it quick!
|
Wagabet - bitcoin casino with new game mechanics and nice designe!
|
|
|
Mad Macs
Member
Offline
Activity: 92
Merit: 10
|
|
May 29, 2014, 08:49:44 PM |
|
my falcons only mining at 8Mh/s..... hopefully it will go up
My Black Widow takes about 5-10 minutes to get to full speed. According to zenminer at least. |
|
|
|
|
chrisnewby91
Newbie
Offline
Activity: 28
Merit: 0
|
|
May 29, 2014, 08:50:41 PM |
|
my falcons only mining at 8Mh/s..... hopefully it will go up. and good to know about the pause trick. i was clicking it a thousand times to try and read it quick!
your chip count needs to be 128 you have it at 64 maybe that will fix it? I was doing the exact same thing trying to get the error message up glad milesbitcoin told me about the pause function |
|
|
|
|
DriverDan
Newbie
Offline
Activity: 18
Merit: 0
|
|
May 29, 2014, 08:56:26 PM |
|
WARNING! ONLY PLUG IN A 6 PIN PCIe CONNECTOR! DO NOT PLUG IN ALL 8 PINS!
The connectors on the ASICs are wired incorrectly. The additional 2 pins are supposed to both be ground but they wired one of them to +12V. This creates a short. My PSU detected the short and refused to turn on. Hopefully all PSUs do this. If they don't you will probably melt the connector and possibly start a fire.
|
|
|
|
|
mbauman89
Full Member
Offline
Activity: 345
Merit: 100
https://wagabet.com/?ref=4GhhtoyKXXeVtx83ispZ1T
|
|
May 29, 2014, 09:04:18 PM |
|
WARNING! ONLY PLUG IN A 6 PIN PCIe CONNECTOR! DO NOT PLUG IN ALL 8 PINS!
The connectors on the ASICs are wired incorrectly. The additional 2 pins are supposed to both be ground but they wired one of them to +12V. This creates a short. My PSU detected the short and refused to turn on. Hopefully all PSUs do this. If they don't you will probably melt the connector and possibly start a fire.
THIS IS 100% CORRECT!!! |
Wagabet - bitcoin casino with new game mechanics and nice designe!
|
|
|
|
