[ANN] LeaseRig.net Rent & Hire Scrypt(Jane/Nfactor)/SHA3/SHA256/X11 HashPower!

[xmk3]

Hmmm... Isn't the current system like this?

Customer > Leaserig > Provider
0.001 for 10 hours > 0.001 > 0.00097/hour

So... If they are 5 hours into the lease and someone cancels.. then Leaserig can pay 0.000485BTC back to the customer, since the fee has already been taken.
So even if the lease gets cancelled, you guys profit. That Okay?
Or, if the customer cancels, then the customer gets paid 0.000485, and if the provider cancels, then the provider gets 0.000015BTC subtracted from the balance.

No.

Currently we lose the fee if a lease is cancelled.  It has turned us even closer to a non-profit.

Currently if a lease is cancelled we lose the fee and the provider loses the last payment.  This is why only providers can cancel leases via support.

That's not what I meant, I meant that you could make it like that, so that you guys get the fee either way.

Also, XMK3, is there any plans for support for the zenController?

We support the PI.  What's the issue.

I mean, the zenController has a function which is remote control. Would there be any chance for Leaserig to develop something for that?

It's definitely possible.  From what I read the other day it's it just a Rasberry Pi with a custom image? 

I'll see if I can find a copy of it to run on my rpi. 

[byt411]

Hmmm... Isn't the current system like this?

Customer > Leaserig > Provider
0.001 for 10 hours > 0.001 > 0.00097/hour

So... If they are 5 hours into the lease and someone cancels.. then Leaserig can pay 0.000485BTC back to the customer, since the fee has already been taken.
So even if the lease gets cancelled, you guys profit. That Okay?
Or, if the customer cancels, then the customer gets paid 0.000485, and if the provider cancels, then the provider gets 0.000015BTC subtracted from the balance.

No.

Currently we lose the fee if a lease is cancelled.  It has turned us even closer to a non-profit.

Currently if a lease is cancelled we lose the fee and the provider loses the last payment.  This is why only providers can cancel leases via support.

That's not what I meant, I meant that you could make it like that, so that you guys get the fee either way.

Also, XMK3, is there any plans for support for the zenController?

We support the PI.  What's the issue.

I mean, the zenController has a function which is remote control. Would there be any chance for Leaserig to develop something for that?

It's definitely possible.  From what I read the other day it's it just a Rasberry Pi with a custom image? 

I'll see if I can find a copy of it to run on my rpi. 

Since you are developer, you might as well ask gawminers tech support straight for it, and yes, it is a Pi with a custom image.
The whole problem is that if I reflash the Pi, my warranty gets ruined, which is quite stupid.

[suchmoon]

The whole problem is that if I reflash the Pi, my warranty gets ruined, which is quite stupid.

Can you put in another SDHC card and keep the original one for warranty purposes?

[byt411]

The whole problem is that if I reflash the Pi, my warranty gets ruined, which is quite stupid.

Can you put in another SDHC card and keep the original one for warranty purposes?

I have no idea, their support told me that any change in the firmware was forbidden.

[railzand]

Oo rig sorting

[helipotte]

Is anyone else having trouble with Eligius and disconnects using LRP?  I have been having a time with this.  I am now using another pool and all is working great.

Eligius and P2Pool just won't work with LRP. There appears to be some hard-coded buffer size in LRP that drops the end off the work requests, which is why it works for a bit (at the start of a block) and then suddenly starts failing.

I've had a ticket open about this since before it was sold.  That's why I don't use LRP any more for AusMiner.

Just the answer I was looking for. Thanks.  I guess my Ants aren't rentable until this is patched.

Is this issue ever going to be patched?

Thanks.

[miaviator]

Is anyone else having trouble with Eligius and disconnects using LRP?  I have been having a time with this.  I am now using another pool and all is working great.

Eligius and P2Pool just won't work with LRP. There appears to be some hard-coded buffer size in LRP that drops the end off the work requests, which is why it works for a bit (at the start of a block) and then suddenly starts failing.

I've had a ticket open about this since before it was sold.  That's why I don't use LRP any more for AusMiner.

Just the answer I was looking for. Thanks.  I guess my Ants aren't rentable until this is patched.

Is this issue ever going to be patched?

Thanks.

Why would you want to use LRP vs direct for an ANT?

[miaviator]

Oo rig sorting

No rig sorting.  

EDIT: NVM.

[Puycheval]

@Miaviator : could you add X13 mining algorithm ?

[miaviator]

@Miaviator : could you add X13 mining algorithm ?

Working on it!

Anyone want to convert some of my GPU rigs

[miaviator]

@Miaviator : could you add X13 mining algorithm ?

[charmees]

was renting out my rig, but suddenly got email

Your mining rig  is rented out but not available to be managed over LeaseRig.net.
Thank you for using LeaseRig.

Checking my rig, it is running super stable and good. checking logs from miner:

connecting to leaserig.net failed.

suggestsions?

[byt411]

was renting out my rig, but suddenly got email

Your mining rig  is rented out but not available to be managed over LeaseRig.net.
Thank you for using LeaseRig.

Checking my rig, it is running super stable and good. checking logs from miner:

connecting to leaserig.net failed.

suggestsions?

API problem?

[miaviator]

Site working for me, provider page was a little slow a few hours ago.

Can I add onto my requests that we add Groestl as another algo to rent from in the near future?

Yes.  Yes you can.

Done.

[suchmoon]

"Fill order" seems to be broken or maybe I'm just having one of those Fridays...

When I try to adjust the default hours (e.g. the order on Scrypt page has now 18 hours as a default, I want to change it to 12) the "Fill" button disappears. I think there is some kind of "onchange" javascript that tries to recalculate the numbers and probably hides the button if the numbers don't make sense... but it either doesn't work properly or I'm doing something wrong.

[miaviator]

"Fill order" seems to be broken or maybe I'm just having one of those Fridays...

When I try to adjust the default hours (e.g. the order on Scrypt page has now 18 hours as a default, I want to change it to 12) the "Fill" button disappears. I think there is some kind of "onchange" javascript that tries to recalculate the numbers and probably hides the button if the numbers don't make sense... but it either doesn't work properly or I'm doing something wrong.

I had the same issue.   There's a ticket in dev queue for it.

That page also needs to stop allowing invalid amounts for placed and filled orders.

I believe it'll be fixed on dev tonight.

[helipotte]

Is anyone else having trouble with Eligius and disconnects using LRP?  I have been having a time with this.  I am now using another pool and all is working great.

Eligius and P2Pool just won't work with LRP. There appears to be some hard-coded buffer size in LRP that drops the end off the work requests, which is why it works for a bit (at the start of a block) and then suddenly starts failing.

I've had a ticket open about this since before it was sold.  That's why I don't use LRP any more for AusMiner.

Just the answer I was looking for. Thanks.  I guess my Ants aren't rentable until this is patched.

Is this issue ever going to be patched?

Thanks.

Why would you want to use LRP vs direct for an ANT?

It is not one, but four.  It is also WAY easier that dealing with four separate leases.  Also my IP is not static, and changes with out warning.  The proxy simply provides better

service in this particular configuration.  My other gear is direct, but has a staic IP.

[emdje]

Is it possible to set a pool of my choice (as a provider) that is used when I am not being rented?

[Tigggger]

Is it possible to set a pool of my choice (as a provider) that is used when I am not being rented?

Yes, in the rig configuration page there is this where you can add 2 pools



You can also add more when the rig is not being hired from the 'Pools' link but they are lost once a hire starts, and it will return to the 2 set above once a rental is over.

[byt411]

Can someone do me a favor and compile a cgminer that works for both GPUs and GAWMiners products? I tried following GAW's instructions and it went... horribly.
The source code is here: https://gawminers.zendesk.com/hc/en-us/articles/202184744-cgminer-source-and-config