[XMR] Monero - A secure, private, untraceable cryptocurrency

[togoshigekata]

I wrote a Monero Mining guide:
https://togosh.medium.com/monero-mining-xmr-guide-34367678a554

[elrippos friend]

It seems to me, that the base for this is XMR Monero 
Especially lokinet with a version # of 0.8.3 remembers me of the start of my XMR times 

https://lokinet.org/
https://oxen.io/
https://getsession.org/

Does anybody know who these guys are 

[elrippos friend]

It seems to me, that the base for this is XMR Monero 
Especially lokinet with a version # of 0.8.3 remembers me of the start of my XMR times 

https://lokinet.org/
https://oxen.io/
https://getsession.org/

Does anybody know who these guys are 

Just checked it, the whole environment is based on monero V7  (installed a node a created a wallet)
The idea per sé is good, but the staking of a node with 15000 OXEN to get registered as a node an earn approx 22,5% of your stake per year is...

BUT --> good to see that the whole environment is getting some drive on it 

[menoiazei]

 Downloaded the wallet on a new iMac weeks ago, seems like it takes forever to sync
why this is happening is it going to synchronise ever??

Many thanks!

[cfif]

Dynamic scaleble, fast speed and high privatency of this cryptocoin shows his  quality, but whats about mass adoptation of using? Monero is still hard to use with wallets?

[cAPSLOCK]

Dynamic scaleble, fast speed and high privatency of this cryptocoin shows his  quality, but whats about mass adoptation of using? Monero is still hard to use with wallets?

I cannot answer your question with a simple yes/no.  Monero has become to big and important a crypto player to be viewed that simply.

There is no doubt that the official wallet has a somewhat steeper learning curve than most wallets based on the bitcoin-qt design and it's descendants.  And monero is a more complex cryptocurrency than most others with for example a view and spend key.  But the official wallet can be set up quickly and synced to a remote note for speed, and if you can use a bitcoin wallet you can use this. If you want the most arcane Monero wallet feel then try the CLI.  I still use it.

And syncing a full node for Monero is generally a longish process and computationally more complex than Bitcoin.

But on the desktop there are wonderful simple light wallets: https://featherwallet.org/ or https://mymonero.com/ - These are super easy to use.

And on mobile devices: https://www.monerujo.io/ and https://cakewallet.com/

And there are web wallets you can use as well... but I am not going to suggest those because key loggers are plentiful, as are scams.  I will let you find those yourself.

Overall Monero does not HAVE to be hard to use.

As to your question about adoption?  monero has pretty much cemented itself as THE currency of the dark net... for better and for worse.  It has established itself as a MAJOR player among the transactional cryptocurrencies but it's price does not yet reflect this.

[elrippos friend]

 Downloaded the wallet on a new iMac weeks ago, seems like it takes forever to sync
why this is happening is it going to synchronise ever??

Many thanks!

Which wallet are you using, CLI or GUI?

[menoiazei]

 Downloaded the wallet on a new iMac weeks ago, seems like it takes forever to sync
why this is happening is it going to synchronise ever??

Many thanks!

Which wallet are you using, CLI or GUI?

 CLI

[elrippos friend]

 Downloaded the wallet on a new iMac weeks ago, seems like it takes forever to sync
why this is happening is it going to synchronise ever??

Many thanks!

Which wallet are you using, CLI or GUI?

 CLI

can you post the output of the command

Code:

status

of your CLI wallet

Should look something like this

Code:

Refreshed 2296529/2296529, synced, daemon RPC v3.5, SSL

[menoiazei]

 Downloaded the wallet on a new iMac weeks ago, seems like it takes forever to sync
why this is happening is it going to synchronise ever??

Many thanks!

Which wallet are you using, CLI or GUI?

 CLI

can you post the output of the command

Code:

status

of your CLI wallet

Should look something like this

Code:

Refreshed 2296529/2296529, synced, daemon RPC v3.5, SSL

dont have access to the computer that i have the CLI wallet right now, i will send to you the command as soon as i get to that pc (600km from where i am at the moment)

Also i have installed the GUI on another mac at my office and i am facing a different problem i try to do solo mining and i get the message "Error Start Mining" "couldn't start mining" any ideas why this is happening??

Many thanks

[menoiazei]

  also i tried to send some about 6.some XMR from kraken to the GUI wallet (this one not synced yet) and even though transaction seems completed from kraken with transaction id and everything amount is not yet at the wallet,, this is because is not synced or some other reason??

[menoiazei]

 sone more questions, why monero is not supported by ledger live software in their hardware wallet,
and is there atomic swap implementation between BTC and XMR??

[bct_ail]

  also i tried to send some about 6.some XMR from kraken to the GUI wallet (this one not synced yet) and even though transaction seems completed from kraken with transaction id and everything amount is not yet at the wallet,, this is because is not synced or some other reason??

..yes, because is it not synced yet.

[elrippos friend]

 Downloaded the wallet on a new iMac weeks ago, seems like it takes forever to sync
why this is happening is it going to synchronise ever??

Many thanks!

Which wallet are you using, CLI or GUI?

 CLI

can you post the output of the command

Code:

status

of your CLI wallet

Should look something like this

Code:

Refreshed 2296529/2296529, synced, daemon RPC v3.5, SSL

dont have access to the computer that i have the CLI wallet right now, i will send to you the command as soon as i get to that pc (600km from where i am at the moment)

Also i have installed the GUI on another mac at my office and i am facing a different problem i try to do solo mining and i get the message "Error Start Mining" "couldn't start mining" any ideas why this is happening??

Many thanks

Ok, post the output when you get to the command line

  also i tried to send some about 6.some XMR from kraken to the GUI wallet (this one not synced yet) and even though transaction seems completed from kraken with transaction id and everything amount is not yet at the wallet,, this is because is not synced or some other reason??

Probably, but you can a post a picture of the bottom left of your GUI wallet, where the status is stated (blocks remaining - synced status)

 sone more questions, why monero is not supported by ledger live software in their hardware wallet,
and is there atomic swap implementation between BTC and XMR??

I do not know if there is Ledger support for XMR. Trezor does support it.

Concerning atomic swaps, read in down below

https://www.reddit.com/r/Monero/comments/gqf6xl/atomic_swaps/

https://www.reddit.com/r/Monero/comments/kpclyb/monero_btc_atomic_swap/

[menoiazei]

 Downloaded the wallet on a new iMac weeks ago, seems like it takes forever to sync
why this is happening is it going to synchronise ever??

Many thanks!

Which wallet are you using, CLI or GUI?

 CLI

can you post the output of the command

Code:

status

of your CLI wallet

Should look something like this

Code:

Refreshed 2296529/2296529, synced, daemon RPC v3.5, SSL

dont have access to the computer that i have the CLI wallet right now, i will send to you the command as soon as i get to that pc (600km from where i am at the moment)

Also i have installed the GUI on another mac at my office and i am facing a different problem i try to do solo mining and i get the message "Error Start Mining" "couldn't start mining" any ideas why this is happening??

Many thanks

Ok, post the output when you get to the command line

  also i tried to send some about 6.some XMR from kraken to the GUI wallet (this one not synced yet) and even though transaction seems completed from kraken with transaction id and everything amount is not yet at the wallet,, this is because is not synced or some other reason??

Probably, but you can a post a picture of the bottom left of your GUI wallet, where the status is stated (blocks remaining - synced status)

 sone more questions, why monero is not supported by ledger live software in their hardware wallet,
and is there atomic swap implementation between BTC and XMR??

I do not know if there is Ledger support for XMR. Trezor does support it.

Concerning atomic swaps, read in down below

https://www.reddit.com/r/Monero/comments/gqf6xl/atomic_swaps/

https://www.reddit.com/r/Monero/comments/kpclyb/monero_btc_atomic_swap/

For the GUI wallet mining issue bottom left status is synced,

will check links for the swaps

Many thanks!

[elrippos friend]

 Downloaded the wallet on a new iMac weeks ago, seems like it takes forever to sync
why this is happening is it going to synchronise ever??

Many thanks!

Which wallet are you using, CLI or GUI?

 CLI

can you post the output of the command

Code:

status

of your CLI wallet

Should look something like this

Code:

Refreshed 2296529/2296529, synced, daemon RPC v3.5, SSL

dont have access to the computer that i have the CLI wallet right now, i will send to you the command as soon as i get to that pc (600km from where i am at the moment)

Also i have installed the GUI on another mac at my office and i am facing a different problem i try to do solo mining and i get the message "Error Start Mining" "couldn't start mining" any ideas why this is happening??

Many thanks

Ok, post the output when you get to the command line

  also i tried to send some about 6.some XMR from kraken to the GUI wallet (this one not synced yet) and even though transaction seems completed from kraken with transaction id and everything amount is not yet at the wallet,, this is because is not synced or some other reason??

Probably, but you can a post a picture of the bottom left of your GUI wallet, where the status is stated (blocks remaining - synced status)

 sone more questions, why monero is not supported by ledger live software in their hardware wallet,
and is there atomic swap implementation between BTC and XMR??

I do not know if there is Ledger support for XMR. Trezor does support it.

Concerning atomic swaps, read in down below

https://www.reddit.com/r/Monero/comments/gqf6xl/atomic_swaps/

https://www.reddit.com/r/Monero/comments/kpclyb/monero_btc_atomic_swap/

For the GUI wallet mining issue bottom left status is synced,

will check links for the swaps

Many thanks!

You are welcome 

[elrippos friend]

Hey guys,

i have a question and i didn´t find the answer on the inet.

- Create a wallet on the PC named julia
- Purchase a Trezor Model T
- Restore the wallet Julia on Trezot Model T
- I have two Julia wallets (one on the PC and the same wallet on the Trezor)

If i wanted to restore a wallet on a Trezor device which was initially created on the PC, is that possible?

[bobymoore]

hi guys,i had 0,18 moneros in my gui wallet,i wanted to send these in exodus wallet,so i made the transaction but the monero not show up in exodus and in my gui wallet,why? can you help me?

[Globb0]

I have to say, having made a few Monero transactions in recent weeks.

They are pretty quick and easy. A+++   yak yak ebay style review.


Are you sure its hard?

[bitebits]

Hey guys,

i have a question and i didn´t find the answer on the inet.

- Create a wallet on the PC named julia
- Purchase a Trezor Model T
- Restore the wallet Julia on Trezot Model T
- I have two Julia wallets (one on the PC and the same wallet on the Trezor)

If i wanted to restore a wallet on a Trezor device which was initially created on the PC, is that possible?

No, because your Trezor uses a different seed. You need to transfer the XMR from the 'PC wallet' to the 'Trezor wallet'.