|
bugsywugsy
|
 |
January 10, 2016, 06:27:34 AM |
|
So I have my wallet built on Linux, and getinfo retrieves current info but I sent some clam to the address a few days ago and it's still at 0.00 balance. what could be wrong, what are my next steps?
Do you have the transaction ID? Does the transaction show up on the block explorers? Check on khashier.com for instance. yes it appears in the block explorer, 3.3k confirmations. just not in the wallet.
|
|
|
|
|
Brob12321
|
 |
January 10, 2016, 06:35:57 AM |
|
I usually stake Bitbean, Digicube, Clam, Diamond, Tek(it takes very long), Hypserstake. If you looking for stakes everyday Digicube has a 2000% interest rate and is currently valued at about 8 cents. Clams are likely to outlive any of those coins I mentioned though.
Awesome. Thanks. So you've investigated this. I hereby dub you an expert. And you are saying, that clams are the best thing to stake. That is your opinion, right? Those other coins are not heavily traded anywhere or super active, right? So in the POS world, clam wins. right? Yes I've done some research and have had personal experience with all of them. The other coins besides Clam do not have much volume so they really aren't great if you're looking to do a "real" investment because it would alter the market by a huge amount if you buy or sell. Clam is good I would stake it on just-dice though to get you're percentage every couple minutes instead of staking it by yourself and getting a stake every few days. It just feels like you're making more money when it comes in faster lol.
|
|
|
|
|
dooglus
Legendary

Activity: 2940
Merit: 1339
|
 |
January 10, 2016, 07:13:02 AM |
|
yes it appears in the block explorer, 3.3k confirmations. just not in the wallet.
OK. Check that you have the private key in your wallet, by going to the debug console and running: validateaddress xYOURADDRESS where xYOURADDRESS is your CLAM address. If so, then you just need to rescan the blockchain, by running the client with the -rescan parameter. clam-qt -rescan
|
| Just-Dice | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | Play or Invest | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | 1% House Edge |
|
|
|
|
bugsywugsy
|
 |
January 10, 2016, 07:45:50 AM |
|
yes it appears in the block explorer, 3.3k confirmations. just not in the wallet.
OK. Check that you have the private key in your wallet, by going to the debug console and running: validateaddress xYOURADDRESS where xYOURADDRESS is your CLAM address. If so, then you just need to rescan the blockchain, by running the client with the -rescan parameter. clam-qt -rescan Its valid, but there is no private key when I issue that command
|
|
|
|
dooglus
Legendary

Activity: 2940
Merit: 1339
|
 |
January 10, 2016, 09:27:09 AM |
|
Its valid, but there is no private key when I issue that command
It's the 'ismine' field you're looking at. If it's false, you didn't import the private key for that address. Use 'importprivkey YOURPRIVKEY' in the debug console to import it.
|
| Just-Dice | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | Play or Invest | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | 1% House Edge |
|
|
|
|
bugsywugsy
|
 |
January 10, 2016, 09:38:19 AM |
|
Its valid, but there is no private key when I issue that command
It's the 'ismine' field you're looking at. If it's false, you didn't import the private key for that address. Use 'importprivkey YOURPRIVKEY' in the debug console to import it. It's true.
|
|
|
|
dooglus
Legendary

Activity: 2940
Merit: 1339
|
 |
January 10, 2016, 09:43:39 AM |
|
Its valid, but there is no private key when I issue that command
It's the 'ismine' field you're looking at. If it's false, you didn't import the private key for that address. Use 'importprivkey YOURPRIVKEY' in the debug console to import it. It's true. Then a -rescan should fix it.
|
| Just-Dice | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | Play or Invest | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | 1% House Edge |
|
|
|
clf99
Member


Activity: 62
Merit: 10
liberty
|
 |
January 10, 2016, 10:09:40 AM |
|
I usually stake Bitbean, Digicube, Clam, Diamond, Tek(it takes very long), Hypserstake. If you looking for stakes everyday Digicube has a 2000% interest rate and is currently valued at about 8 cents. Clams are likely to outlive any of those coins I mentioned though.
Awesome. Thanks. So you've investigated this. I hereby dub you an expert. And you are saying, that clams are the best thing to stake. That is your opinion, right? Those other coins are not heavily traded anywhere or super active, right? So in the POS world, clam wins. right? Yes I've done some research and have had personal experience with all of them. The other coins besides Clam do not have much volume so they really aren't great if you're looking to do a "real" investment because it would alter the market by a huge amount if you buy or sell. Clam is good I would stake it on just-dice though to get you're percentage every couple minutes instead of staking it by yourself and getting a stake every few days. It just feels like you're making more money when it comes in faster lol. thank you very much for your insights. i would submit that this exchange alone is one part of an answer to the fellow who thinks clams are worthless. Clams are the best coin for staking. And that in itself is a differentiator in the market that has value.
|
Every year the world is getting more peaceful.
|
|
|
dooglus
Legendary

Activity: 2940
Merit: 1339
|
 |
January 10, 2016, 10:19:53 AM |
|
i would submit that this exchange alone is one part of an answer to the fellow who thinks clams are worthless.
Don't make the mistake of thinking that guy actually believes what he is saying. He's making an amateur attempt at price manipulation, that's all.
|
| Just-Dice | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | Play or Invest | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | 1% House Edge |
|
|
|
rocoro
Legendary

Activity: 938
Merit: 1000
|
 |
January 10, 2016, 01:21:33 PM |
|
Is there some way with the linux daemon to tell the date / timestamp of the last stake that occurred?
I have over 1.5k split up in small amounts and seems like almost over a week since my last stake.. is that normal? (Used to seem like almost every day or every other day it would stake)
|
|
|
|
|
dooglus
Legendary

Activity: 2940
Merit: 1339
|
 |
January 10, 2016, 05:44:23 PM |
|
Is there some way with the linux daemon to tell the date / timestamp of the last stake that occurred?
I have over 1.5k split up in small amounts and seems like almost over a week since my last stake.. is that normal? (Used to seem like almost every day or every other day it would stake)
I don't know of a simple way, but this works for me: $ clamd listtransactions '*' 10 | grep -A10 -E '"category" : "(immature|generate)"' | grep -E '"(category|time)"' | awk '{print $3}' | tr -d ',"' | while read category; do read time; echo "$(date -d @$time) : $category"; done
Change the 10 in the 4th word to a higher number if you have a lot of non-staking transactions since the most recent stake.
|
| Just-Dice | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | Play or Invest | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | 1% House Edge |
|
|
|
clf99
Member


Activity: 62
Merit: 10
liberty
|
 |
January 10, 2016, 06:01:37 PM |
|
i would submit that this exchange alone is one part of an answer to the fellow who thinks clams are worthless.
Don't make the mistake of thinking that guy actually believes what he is saying. He's making an amateur attempt at price manipulation, that's all. Probably correct. The value of any currency is ultimately philosophical really, even gold coins. Just because you can touch them doesn't necessarily make them valuable. The fact that you can hammer them into a bracelet and give it to a girl and get laid gives gold a value that clams might not have, but when was the last time you heard of someone doing that? The question of 'how are clams superior to other currencies?' is in part answered by - easy to stake either on JD (no backups required) or on your own box (must do backups), lendable on polo, easy to trade in a liquid market, easy to gamble with in various places. This superiority is perhaps why the value in dollar terms might be justified. It is still philosophical. But so is the dollar.
|
Every year the world is getting more peaceful.
|
|
|
rocoro
Legendary

Activity: 938
Merit: 1000
|
 |
January 10, 2016, 07:17:04 PM |
|
Is there some way with the linux daemon to tell the date / timestamp of the last stake that occurred?
I have over 1.5k split up in small amounts and seems like almost over a week since my last stake.. is that normal? (Used to seem like almost every day or every other day it would stake)
I don't know of a simple way, but this works for me: $ clamd listtransactions '*' 10 | grep -A10 -E '"category" : "(immature|generate)"' | grep -E '"(category|time)"' | awk '{print $3}' | tr -d ',"' | while read category; do read time; echo "$(date -d @$time) : $category"; done
Change the 10 in the 4th word to a higher number if you have a lot of non-staking transactions since the most recent stake. Thanks, but that shows nothing for me. There is no output. Is it because i'm on version "version" : "v1.4.17-7-gac5324a" ?
|
|
|
|
|
BayAreaCoins
Legendary

Activity: 4662
Merit: 1404
AltQuick.com Owner
|
 |
January 10, 2016, 08:10:27 PM |
|
Confirmation that Vulturefund was the seller the other day for you scrubs: 16:28:36 (88888) <BayAreaCoins> AdolfSchnitzler, Are you VultureFund on bitcointalk? 16:28:41 (6) <AdolfSchnitzler> yes 16:28:43 (6) <AdolfSchnitzler> totaly 16:28:46 (88888) <BayAreaCoins> I thought so 16:28:45 (6) <AdolfSchnitzler> fucking plebs 16:28:51 (88888) <BayAreaCoins> fucking plebs Sorry for calling you gay Adolf  This is wrong and that is not Adolf. Vulture that means you are still gay 
|
https://AltQuick.com/exchange/ - A Bitcoin-based exchange for Altcoins, Signet, & Bitcoin Testnet (no fiat, stables, or KYC) - PGP D2F6EB9E127D75D6F994BA5F6862DDA3084922EE
|
|
|
|
bugsywugsy
|
 |
January 10, 2016, 09:28:16 PM |
|
Its valid, but there is no private key when I issue that command
It's the 'ismine' field you're looking at. If it's false, you didn't import the private key for that address. Use 'importprivkey YOURPRIVKEY' in the debug console to import it. It's true. Then a -rescan should fix it. Tried it, how long does the rescan take? because the wallet still reads 0.00. I have headless wallet so I ran "clamd -rescan".
|
|
|
|
dooglus
Legendary

Activity: 2940
Merit: 1339
|
 |
January 11, 2016, 12:43:41 AM |
|
Tried it, how long does the rescan take? because the wallet still reads 0.00. I have headless wallet so I ran "clamd -rescan".
The time it takes is dependent on the number of transactions in your wallet. I think it should take less than 10 minutes if you don't have many. You need to shut down your current clamd first: $ clamd stop Then start a new one: $ clamd -rescan
|
| Just-Dice | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | Play or Invest | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | 1% House Edge |
|
|
|
dooglus
Legendary

Activity: 2940
Merit: 1339
|
 |
January 11, 2016, 12:45:37 AM |
|
Confirmation that Vulturefund was the seller the other day for you scrubs:
16:28:36 (88888) <BayAreaCoins> AdolfSchnitzler, Are you VultureFund on bitcointalk? 16:28:41 (6) <AdolfSchnitzler> yes 16:28:43 (6) <AdolfSchnitzler> totaly 16:28:46 (88888) <BayAreaCoins> I thought so 16:28:45 (6) <AdolfSchnitzler> fucking plebs 16:28:51 (88888) <BayAreaCoins> fucking plebs
This is wrong and that is not Adolf. (6) is Adolf. He was joking about being VultureFund.
|
| Just-Dice | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | Play or Invest | ██ ██████████ ██████████████████ ██████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████████████ ██████████████████████ ██████████████ ██████ | 1% House Edge |
|
|
|
rocoro
Legendary

Activity: 938
Merit: 1000
|
 |
January 11, 2016, 01:08:24 AM Last edit: January 11, 2016, 01:45:58 AM by rocoro |
|
Is there some way with the linux daemon to tell the date / timestamp of the last stake that occurred?
I have over 1.5k split up in small amounts and seems like almost over a week since my last stake.. is that normal? (Used to seem like almost every day or every other day it would stake)
I don't know of a simple way, but this works for me: $ clamd listtransactions '*' 10 | grep -A10 -E '"category" : "(immature|generate)"' | grep -E '"(category|time)"' | awk '{print $3}' | tr -d ',"' | while read category; do read time; echo "$(date -d @$time) : $category"; done
Change the 10 in the 4th word to a higher number if you have a lot of non-staking transactions since the most recent stake. Thanks, but that shows nothing for me. There is no output. Is it because i'm on version "version" : "v1.4.17-7-gac5324a" ? bump... trying to update, I guess I'll see if that helps... I still don't get why staking seems to have stopped, it says "true" in getstakinginfo & timeoffset is -1
|
|
|
|
|
|
bugsywugsy
|
 |
January 11, 2016, 02:27:29 AM |
|
Tried it, how long does the rescan take? because the wallet still reads 0.00. I have headless wallet so I ran "clamd -rescan".
The time it takes is dependent on the number of transactions in your wallet. I think it should take less than 10 minutes if you don't have many. You need to shut down your current clamd first: $ clamd stop Then start a new one: $ clamd -rescan Didn't do anything. Balance still 0.00. I think I have a broken wallet. But repair wallet doesn't help either.
|
|
|
|
rocoro
Legendary

Activity: 938
Merit: 1000
|
 |
January 11, 2016, 02:55:46 AM |
|
Tried it, how long does the rescan take? because the wallet still reads 0.00. I have headless wallet so I ran "clamd -rescan".
The time it takes is dependent on the number of transactions in your wallet. I think it should take less than 10 minutes if you don't have many. You need to shut down your current clamd first: $ clamd stop Then start a new one: $ clamd -rescan Didn't do anything. Balance still 0.00. I think I have a broken wallet. But repair wallet doesn't help either. Did you try dumpprivkey on that address... get the private key and re-import to a new wallet file... just what I would try..
|
|
|
|
|
|