tolazy
|
|
February 04, 2016, 01:53:17 PM Last edit: February 04, 2016, 06:22:17 PM by tolazy |
|
Hi. just got my new gpu Saphire R9 390X Nitro 8GB
got sgminer to work with X11 with this settings: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe -k x11mod --gpu-platform 1 -d 0 -w 128 -I 18 -g 4 -l 1 --thread-concurrency 8193 --auto-fan -o stratum+tcp://x:7903 -u xx -p x
i get about 5.35MH/s is that OK ? useing: sgminer-v5.2.1 for x11 not sure these settings are optimal for my card.
and is skein "digibyte" only for NVIDIA ?
|
|
|
|
Eliovp
Legendary
Offline
Activity: 1050
Merit: 1293
Huh?
|
|
February 04, 2016, 07:11:21 PM |
|
Hi. just got my new gpu Saphire R9 390X Nitro 8GB
got sgminer to work with X11 with this settings: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe -k x11mod --gpu-platform 1 -d 0 -w 128 -I 18 -g 4 -l 1 --thread-concurrency 8193 --auto-fan -o stratum+tcp://x:7903 -u xx -p x
i get about 5.35MH/s is that OK ? useing: sgminer-v5.2.1 for x11 not sure these settings are optimal for my card.
and is skein "digibyte" only for NVIDIA ?
You should get at least 3x the speed you're getting now. Get the nice hash version if you're on windows. Open the bin folder and choose the first sgminer folder in there. Run that. Good luck!
|
|
|
|
tolazy
|
|
February 04, 2016, 07:24:52 PM |
|
Hi. just got my new gpu Saphire R9 390X Nitro 8GB
got sgminer to work with X11 with this settings: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe -k x11mod --gpu-platform 1 -d 0 -w 128 -I 18 -g 4 -l 1 --thread-concurrency 8193 --auto-fan -o stratum+tcp://x:7903 -u xx -p x
i get about 5.35MH/s is that OK ? useing: sgminer-v5.2.1 for x11 not sure these settings are optimal for my card.
and is skein "digibyte" only for NVIDIA ?
You should get at least 3x the speed you're getting now. Get the nice hash version if you're on windows. Open the bin folder and choose the first sgminer folder in there. Run that. Good luck! same bat file for sgminer-5-1-0-optimized and i get [20:18:41] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [20:18:41] Pool: 0 URL: stratum+tcp://xx.net:7903 User: xx Password: x [20:18:41] Press any key to exit, or sgminer will try again in 15s. [20:18:56] cheadle.ddns.net difficulty changed to 0.001 [20:18:57] No servers were found that could be used to get work from. [20:18:57] Please check the details from the list below of the servers you have input [20:18:57] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [20:18:57] Pool: 0 URL: stratum+tcp://xx.net:7903 User: xx Password: x [20:18:57] Press any key to exit, or sgminer will try again in 15s. same for sgminer-5-1-1-optimized and sgminer-5-2-1-general feels like it takes to long for them to load so they timeout or something
|
|
|
|
tolazy
|
|
February 04, 2016, 07:40:57 PM Last edit: February 04, 2016, 07:53:46 PM by tolazy |
|
sgminer-5-1-0-optimized give me 3mhs sgminer-5-1-1-optimized give me 3mhs sgminer-5-2-1-general give me 5.4mhs - darkcoind-mod with sgminer.exe -k darkcoin --gpu-platform 1 -d 0 -w 128 -I 18 -g 4 -l 1 --thread-concurrency 32768 --temp-target 80 --temp-cutoff 95 --temp-overheat 92 -o stratum+tcp://cheadle.ddns.net:7903 -u XqvYrZayeDEQq38kNbLeC8S4GmcrY9GvhS -p x
stock sgminer-v5.2.1 give me 5.4mhs with x11mod
i cant to benchmak with NiceHashMiner_v1.2.3.1 the test gets terminated after a while
|
|
|
|
Eliovp
Legendary
Offline
Activity: 1050
Merit: 1293
Huh?
|
|
February 04, 2016, 08:07:50 PM |
|
sgminer-5-1-0-optimized give me 3mhs sgminer-5-1-1-optimized give me 3mhs sgminer-5-2-1-general give me 5.4mhs - darkcoind-mod with sgminer.exe -k darkcoin --gpu-platform 1 -d 0 -w 128 -I 18 -g 4 -l 1 --thread-concurrency 32768 --temp-target 80 --temp-cutoff 95 --temp-overheat 92 -o stratum+tcp://cheadle.ddns.net:7903 -u XqvYrZayeDEQq38kNbLeC8S4GmcrY9GvhS -p x
stock sgminer-v5.2.1 give me 5.4mhs with x11mod
i cant to benchmak with NiceHashMiner_v1.2.3.1 the test gets terminated after a while
Ok, sgminer-5-1-0 is the one you want to go for. create a config file "sgminer.conf" and insert this {
"pools" : [ { "name" : "NiceHash_X11_Fixed", "url" : "stratum+tcp://x11.eu.nicehash.com:3336", "user" : "enter btc address here", "pass" : "x", "algorithm" : "x11mod", "nfactor" : "10", "xintensity" : "1024", "worksize" : "64", "gpu-threads" : "1" } ], "keccak-unroll" : "0", "hamsi-expand-big" : "4", "lookup-gap" : "2", "log-show-date" : true, "debug-log" : false, "failover-only" : true, "failover-switch-delay" : "300", "queue" : "0", "api-listen" : "true", "api-port" : "4028", "api-allow" : "W:127.0.0.1"
} Than create a .bat file: X11.bat for example with this setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe -c sgminer.conf And run it. Should work.
|
|
|
|
tolazy
|
|
February 04, 2016, 08:14:22 PM |
|
sgminer-5-1-0-optimized give me 3mhs sgminer-5-1-1-optimized give me 3mhs sgminer-5-2-1-general give me 5.4mhs - darkcoind-mod with sgminer.exe -k darkcoin --gpu-platform 1 -d 0 -w 128 -I 18 -g 4 -l 1 --thread-concurrency 32768 --temp-target 80 --temp-cutoff 95 --temp-overheat 92 -o stratum+tcp://cheadle.ddns.net:7903 -u XqvYrZayeDEQq38kNbLeC8S4GmcrY9GvhS -p x
stock sgminer-v5.2.1 give me 5.4mhs with x11mod
i cant to benchmak with NiceHashMiner_v1.2.3.1 the test gets terminated after a while
Ok, sgminer-5-1-0 is the one you want to go for. create a config file "sgminer.conf" and insert this {
"pools" : [ { "name" : "NiceHash_X11_Fixed", "url" : "stratum+tcp://x11.eu.nicehash.com:3336", "user" : "enter btc address here", "pass" : "x", "algorithm" : "x11mod", "nfactor" : "10", "xintensity" : "1024", "worksize" : "64", "gpu-threads" : "1" } ], "keccak-unroll" : "0", "hamsi-expand-big" : "4", "lookup-gap" : "2", "log-show-date" : true, "debug-log" : false, "failover-only" : true, "failover-switch-delay" : "300", "queue" : "0", "api-listen" : "true", "api-port" : "4028", "api-allow" : "W:127.0.0.1"
} Than create a .bat file: X11.bat for example with this setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 sgminer.exe -c sgminer.conf And run it. Should work. used that. but added "gpu-platform" : "1", "device" : "0", i dont find my gpu when i run sgminer -c sgminer.conf "added --gpu-platform 1 -d 0 to the bat file and i started. but this came after. [2016-02-04 21:18:52] No servers were found that could be used to get work from. [2016-02-04 21:18:52] Please check the details from the list below of the server s you have input [2016-02-04 21:18:52] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers [2016-02-04 21:18:52] Pool: 0 URL: stratum+tcp://xx.net:7903 User: X qvYrZayeDEQq38kNbLeC8S4GmcrY9GvhS Password: x [2016-02-04 21:18:52] No servers could be used! Exiting. D:\_mining\NiceHashMiner_v1.2.3.1\bin\sgminer-5-1-0-optimized>pause Tryck ned valfri tangent för att fortsätta...
|
|
|
|
tolazy
|
|
February 04, 2016, 08:24:12 PM |
|
change from x11mod to darkcoin-mod and i'm nog doing 8.5Mhs with sgminer-v5.2.1
|
|
|
|
Eliovp
Legendary
Offline
Activity: 1050
Merit: 1293
Huh?
|
|
February 04, 2016, 08:39:15 PM |
|
Take my config i gave you there, run it. "add your BTC address where the user is." run it from inside the sgminer 5-1-0 folder.
Do not change anything about it except maybe the platform thing.
Leave the url and so as it is.
And than run it. Let me know how it went.
Greetings
|
|
|
|
tolazy
|
|
February 05, 2016, 09:05:20 AM |
|
Take my config i gave you there, run it. "add your BTC address where the user is." run it from inside the sgminer 5-1-0 folder.
Do not change anything about it except maybe the platform thing.
Leave the url and so as it is.
And than run it. Let me know how it went.
Greetings
got it to work now. 13-15Mhs thx
|
|
|
|
tolazy
|
|
February 05, 2016, 02:09:11 PM |
|
"algorithm" : "x11mod", "nfactor" : "10", "xintensity" : "1024", "worksize" : "64", "gpu-threads" : "1", "gpu-fan" : "0-95", "temp-target" : "65", "temp-cutoff" : "80", "temp-overheat" : "78" } ], "keccak-unroll" : "0", "hamsi-expand-big" : "4", "lookup-gap" : "2", "log-show-date" : true, "debug-log" : false, "failover-only" : true, "failover-switch-delay" : "300", "queue" : "0", "api-listen" : "true", "api-port" : "4028", "api-allow" : "W:127.0.0.1"
} are the bold added correct?
for some reason the fan dont speed up. 76.0C 1020RPM so its getting hot.. dont want to burn my 2 day old cpu
|
|
|
|
melloyellow
|
|
February 05, 2016, 03:58:12 PM |
|
"algorithm" : "x11mod", "nfactor" : "10", "xintensity" : "1024", "worksize" : "64", "gpu-threads" : "1", "gpu-fan" : "0-95", "temp-target" : "65", "temp-cutoff" : "80", "temp-overheat" : "78" } ], "keccak-unroll" : "0", "hamsi-expand-big" : "4", "lookup-gap" : "2", "log-show-date" : true, "debug-log" : false, "failover-only" : true, "failover-switch-delay" : "300", "queue" : "0", "api-listen" : "true", "api-port" : "4028", "api-allow" : "W:127.0.0.1"
} are the bold added correct?
for some reason the fan dont speed up. 76.0C 1020RPM so its getting hot.. dont want to burn my 2 day old cpu
76C @ 1020 RPM would be a dream for me. Your temp settings are very low. I've never seen any that low but maybe amd improved heat dissipation for the 3xx series a lot, a whole lot.
|
|
|
|
tolazy
|
|
February 05, 2016, 04:23:37 PM |
|
did a reboot of the pc and it started working again.
at the moment i'm mining x11 @15Mhs [P]ool management [G]PU management Settings Display options Quit GPU 0: 59.0C 2684RPM | 14.85M/14.79Mh/s | R: 0.0% HW:0 WU:0.000/m xI:1024
|
|
|
|
tolazy
|
|
February 05, 2016, 05:27:16 PM |
|
is it possible to set sgminer to retry the server your mining at ? looked at help info but didnt see any retry omption.
reason i'm asking is that i mine to my own p2pool server and sometimes it drops out due to p2pool lost connection to the wallet
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
February 05, 2016, 11:09:24 PM |
|
Anyone know why I only get 5.9MH/s with the latest sgminer mining X11 with a 7970 ? Should be around 10Mh
|
|
|
|
e46btc
|
|
February 05, 2016, 11:44:30 PM |
|
Anyone know why I only get 5.9MH/s with the latest sgminer mining X11 with a 7970 ? Should be around 10Mh
Who told you "should be 10 Mhs" ?
|
|
|
|
tolazy
|
|
February 06, 2016, 09:06:01 AM |
|
anyone know why my miner stops after 1-2hours ?
{
"pools" : [ { "name" : "DASH p2pool", "url" : "stratum+tcp://us-west.multipool.us:11111", "user" : "x", "pass" : "x", "algorithm" : "x11mod", "nfactor" : "10", "xintensity" : "1024", "worksize" : "64", "gpu-threads" : "1", "gpu-fan" : "auto", "temp-target" : "65", "temp-cutoff" : "80", "temp-overheat" : "78" } ], "keccak-unroll" : "0", "hamsi-expand-big" : "4", "lookup-gap" : "2", "log-show-date" : true, "debug-log" : false, "failover-only" : true, "failover-switch-delay" : "300", "queue" : "0", "api-listen" : "true", "api-port" : "4028", "api-allow" : "W:127.0.0.1"
} it just stops. no error. tired with another pool same there
|
|
|
|
nicehash
Legendary
Offline
Activity: 885
Merit: 1006
NiceHash.com
|
|
February 06, 2016, 10:52:28 AM |
|
Anyone know why I only get 5.9MH/s with the latest sgminer mining X11 with a 7970 ? Should be around 10Mh
The optimized sgminer which is bundled in the latest NiceHash Miner ( https://github.com/nicehash/NiceHashMiner/releases) should get you approx 10 MHs on 7970 mining x11.
|
|
|
|
e46btc
|
|
February 06, 2016, 11:26:07 AM |
|
Anyone know why I only get 5.9MH/s with the latest sgminer mining X11 with a 7970 ? Should be around 10Mh
The optimized sgminer which is bundled in the latest NiceHash Miner ( https://github.com/nicehash/NiceHashMiner/releases) should get you approx 10 MHs on 7970 mining x11. Have you tried this yourself with your own 7970 ?
|
|
|
|
sp_
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
February 06, 2016, 12:32:51 PM |
|
Remember to use catalyst 15.7.1 drivers. for optimal speed.
|
|
|
|
Xiadas
Full Member
Offline
Activity: 322
Merit: 100
Blockchain Just Entered The Real World
|
|
February 06, 2016, 02:44:57 PM |
|
Anyone know why I only get 5.9MH/s with the latest sgminer mining X11 with a 7970 ? Should be around 10Mh
The optimized sgminer which is bundled in the latest NiceHash Miner ( https://github.com/nicehash/NiceHashMiner/releases) should get you approx 10 MHs on 7970 mining x11. Have you tried this yourself with your own 7970 ? You need to overclock the 7970 quite a lot to get 10 MHz. For stock, the speed is much lower than 10 MH/s.
|
|
|
|
|