[ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner

[semajjames]

I have three rig's all pointing to the Nicehash multi port's and all pointing to the same user
the miner's on all 3 rig's at the same time are restarting  about 4 of 5 times in 24 hours
 
anyone know why does Nicehash cause this ?

cheers

[semajjames]

I have three rig's all pointing to the Nicehash multi port's and all pointing to the same user
the miner's on all 3 rig's at the same time are restarting  about 4 of 5 times in 24 hours
 
anyone know why does Nicehash cause this ?

cheers

More than likely, the offers to buy hashrate are changing in favor of a different algorithm?

If you mean my miner is also switching algo ?
I have seen my miner switch algo without restarting !
         

[semajjames]

I have three rig's all pointing to the Nicehash multi port's and all pointing to the same user
the miner's on all 3 rig's at the same time are restarting  about 4 of 5 times in 24 hours
 
anyone know why does Nicehash cause this ?

cheers

More than likely, the offers to buy hashrate are changing in favor of a different algorithm?

If you mean my miner is also switching algo ?
I have seen my miner switch algo without restarting !
         

Oh, you mean the actual rig is rebooting? I doubt that has anything to do with the pool...

No the rig is not rebooting
sgminer is restarting which does NOT happen when sgminer switches algo

[bradli]

Hi,
i use PIMP- 1.5.7 sgminer-multialgo
can somebody help me with config for 290x for x11. i have 5.2mh till now
290- 5mh
280x-4.2mh
Thank in advance 

[bradli]

what i have to use to be possable to incrase hash rate

[semajjames]

 I am seeing a worrying  time delay between this page "https://www.nicehash.com/index.jsp?a=3" and my miner changing algo !! is this just normal internet lag ?

[badman74]

what i have to use to be possable to incrase hash rate

Maybe badman74's can get you a little bit higher - beyond that, it's as good as it's going to get.

if i remember right my build is available for download though miner menu in pimp
it should get you 5.2mh/s on 290, and 5.8 to 6.2mh/s on 290x (depending on settings)

[semajjames]

tell you what i've had one r9 290 elipa playing up for ages it just would not hash like the other elipa's i thought it was couse of when i flashed the bioses with the stilt's ages ago but today i happened to end up looking at the driver version with device manager and you know what ,, it still had the 13.2 driver on it when the other 3 had 14.7 even though i ran the 14.7 driver installer with all the cards installed.

[semajjames]

Finally got my 290 non x's hashing over 5M on x11 but one card seems very much slower for the "wu" to rise it just is not getting the same rate of accepts, rejects is fine at 0% just v low wu,  would that be normal or am i pushing it too far

wu 0.068
wu 0.087
wu 0.074
wu 0.044 !!!!

after 20 min's

[bradli]

what i have to use to be possable to incrase hash rate

Maybe badman74's can get you a little bit higher - beyond that, it's as good as it's going to get.

if i remember right my build is available for download though miner menu in pimp
it should get you 5.2mh/s on 290, and 5.8 to 6.2mh/s on 290x (depending on settings)

what i have to use to be possable to incrase hash rate

Maybe badman74's can get you a little bit higher - beyond that, it's as good as it's going to get.

if i remember right my build is available for download though miner menu in pimp
it should get you 5.2mh/s on 290, and 5.8 to 6.2mh/s on 290x (depending on settings)

I cant find it there. Some help 

[semajjames]

what i have to use to be possable to incrase hash rate

Maybe badman74's can get you a little bit higher - beyond that, it's as good as it's going to get.

if i remember right my build is available for download though miner menu in pimp
it should get you 5.2mh/s on 290, and 5.8 to 6.2mh/s on 290x (depending on settings)

what i have to use to be possable to incrase hash rate

Maybe badman74's can get you a little bit higher - beyond that, it's as good as it's going to get.

if i remember right my build is available for download though miner menu in pimp
it should get you 5.2mh/s on 290, and 5.8 to 6.2mh/s on 290x (depending on settings)

I cant find it there. Some help 

"badmans' modded sg v5 the link is in his signature

[badman74]

what i have to use to be possable to incrase hash rate

Maybe badman74's can get you a little bit higher - beyond that, it's as good as it's going to get.

if i remember right my build is available for download though miner menu in pimp
it should get you 5.2mh/s on 290, and 5.8 to 6.2mh/s on 290x (depending on settings)

what i have to use to be possable to incrase hash rate

Maybe badman74's can get you a little bit higher - beyond that, it's as good as it's going to get.

if i remember right my build is available for download though miner menu in pimp
it should get you 5.2mh/s on 290, and 5.8 to 6.2mh/s on 290x (depending on settings)

I cant find it there. Some help  

"badmans' modded sg v5 the link is in his signature

If he is using pimp then he should be able to install my modded miner with pimpupdate, there is a miner update option (miner menu) with various miners available
edit: it appears that the link hasn't been updated since v5_0 was merged into master, will see about updating my github to make the link work again (fixed)
edit2: also remove all *.bin files from /opt/ifmi/ or you will still be using the old unoptimized bins

[semajjames]

I just started using remote desktop on win 7 and the temp,fan speed,engine clocks and men clocks reading's have gone from sgminer i tryed a couple of fixes but they don't seem to work
anyone here know any ?
cheers

[semajjames]

Don't use it - use TeamViewer or something.

Guess that is one way ,,, I have been using team viewer but it's so slow and small compared ,,,

So if the temp's and fan speed don't show, does that mean they are not there or do they still work in the background ?

[badman74]

Don't use it - use TeamViewer or something.

Guess that is one way ,,, I have been using team viewer but it's so slow and small compared ,,,

So if the temp's and fan speed don't show, does that mean they are not there or do they still work in the background ?

if i remember right it completely disables them as if you used --no-adl

[BrewCrewFan]

Has anyone tried the new 14.9 drivers? I have and seem to take a hit with my 270x on x11.... from 2.9-3.1 to 2.6 ouch.

[excalibur2010]

I am Third hashrate low from 3.1 to 2.56 on R9 270X on 14.9

[semajjames]

Don't use it - use TeamViewer or something.

Guess that is one way ,,, I have been using team viewer but it's so slow and small compared ,,,

So if the temp's and fan speed don't show, does that mean they are not there or do they still work in the background ?

if i remember right it completely disables them as if you used --no-adl

well i guess the GPU clock settings are working because the hash rate is still the same ,,, I'll listen out for the fan speed changing LOL

[ianpav]

Why it is so.Where am I wrong?
http://prikachi.com/images/249/7637249B.jpg
{
  "pools": [
    {
      "name": "Multi_X11",
      "url": "stratum+tcp://east01.us.trademybit.com:4010",
      "algorithm": "darkcoin-mod",
      "intensity": "19",
      "user": "xxxx.xxxx",
      "pass": "x"
    }
  ],
  "failover-only": true,
  "algorithm": "ckolivas",
  "devices": "all",
  "gpu-fan": "50-85",
  "temp-cutoff": "95",
  "temp-overheat": "85",
  "temp-target": "75",
  "gpu-memdiff": "0",
  "shares": "0",
  "kernel-path": "/usr/local/bin",
  "auto-fan": true,
  "expiry": "28",
  "failover-switch-delay": "10",
  "gpu-dyninterval": "7",
  "gpu-platform": "-1",
  "hamsi-expand-big": "4",
  "log": "5",
  "no-pool-disable": true,
  "no-client-reconnect": true,
  "queue": "0",
  "scan-time": "7",
  "tcp-keepalive": "30",
  "temp-hysteresis": "3"
}

[phzi]

  "gpu-platform": "-1",
}

My bet is that line. Why -1 ? Try 0 or 1 if you also have onboard video enabled.