[ANN] sgminer v5 - optimized X11/X13/NeoScrypt/Lyra2RE/etc. kernel-switch miner

[BitmoreCoin]

7970 just 38khs on Neoscrypt   first time, whats the setting for NEO and which is the best miner?

For 7970, look up the 280x settings.

Tried that but no luck. i am using wolf miner "wolf-neo-sgminer5-hawaii-11212014"

Don't use that one - use Nicehash's build. Hawaii chips are 290/290X.

sgminer uses ckolivas.cl instead of neo when i use that version.
bat file is something like this and neoscrypt.cl is in the same folder.

Code:

sgminer --algorithm neoscrypt -o stratum+tcp://stratum.ftc.theblocksfactory.com:3333 -u x.1 -p x

You need the develop version of SG 5.

Thanks. Now i am getting 100khs but still no way near to 200khs. 1100gpu engine and 1500mem clock.

Try intensity 13, gpu threads 2, worker size 64, thread-concurrency 8192

[Zuikkis]

Instead of intensity 13, you could try xintensity 3.. That usually hits the spot on most GPUs.

And yeah, gpu-threads 2, worksize 64 or 128.

In neoscrypt you usually shouldn't specify any thread-concurrency, then it is automatically calculated from the intensity and gives very optimal results.

[3x2]

Try intensity 13, gpu threads 2, worker size 64, thread-concurrency 8192

i get maximum 110khs, tried many different settings but same result   dont know whats wrong with my GPU  

[3x2]

Instead of intensity 13, you could try xintensity 3.. That usually hits the spot on most GPUs.

And yeah, gpu-threads 2, worksize 64 or 128.

In neoscrypt you usually shouldn't specify any thread-concurrency, then it is automatically calculated from the intensity and gives very optimal results.

bit of improvement, 135khs with xintensity 3.

[B.T.Coin]

i get maximum 110khs, tried many different settings but same result   dont know whats wrong with my GPU  

What version of Catalyst are you running?
Neoscrypt runs best on 14.6 or 14.7, anything else will make the hashrate go down quite a bit.

[lokojones]

3 x r9 280x on win 8.1 14.4 catalyst and sgminer 4.1 - everything working nice and smooth - 3.3Mh
but new ver 5.x.x start only for one sec and crush instantly?! no config apllied.
Tried: new drivers cc 14.9, run as admin and compatibility mode, remove all drivers,
same crap crush all the time:( any clue what that can be pls... appreciate any help. thanks

no one? common... I dont believe that I'm the only one, NEO...

[BitmoreCoin]

3 x r9 280x on win 8.1 14.4 catalyst and sgminer 4.1 - everything working nice and smooth - 3.3Mh
but new ver 5.x.x start only for one sec and crush instantly?! no config apllied.
Tried: new drivers cc 14.9, run as admin and compatibility mode, remove all drivers,
same crap crush all the time:( any clue what that can be pls... appreciate any help. thanks

no one? common... I dont believe that I'm the only one, NEO...

Use 14.6 or 14.7 beta drivers.

[lobo13hf]

Wolf0 where do i find your miner at?

[pallas]

Wolf0 where do i find your miner at?

I haven't written a miner

I really should, but writing the stratum bits and host code is such a drag...

Why not working to improve the excellent sgminer?

HAHAHA just joking! :-D

[Butchy]

Hi guys. I am a new miner around and want to ask you if you can share a bit of your wisdom with me.
I have a mining rig with 6x r270 ,and i am having like 2800 Mh/s per card with sgminer 5.0.
when i try to switch to Sgminer 5.0.1 i am loosing some hashes actualy around 2500 per card. It si clear that i am doing something very wrong. Can you tell me what i can have with these cards and how to achieve it? Thank you in advance.

[lobo13hf]

Hi guys. I am a new miner around and want to ask you if you can share a bit of your wisdom with me.
I have a mining rig with 6x r270 ,and i am having like 2800 Mh/s per card with sgminer 5.0.
when i try to switch to Sgminer 5.0.1 i am loosing some hashes actualy around 2500 per card. It si clear that i am doing something very wrong. Can you tell me what i can have with these cards and how to achieve it? Thank you in advance.

U might need to either upgrade or downgrade your drivers.  

[Butchy]

Hi guys. I am a new miner around and want to ask you if you can share a bit of your wisdom with me.
I have a mining rig with 6x r270 ,and i am having like 2800 Mh/s per card with sgminer 5.0.
when i try to switch to Sgminer 5.0.1 i am loosing some hashes actualy around 2500 per card. It si clear that i am doing something very wrong. Can you tell me what i can have with these cards and how to achieve it? Thank you in advance.

U might need to either upgrade or downgrade your drivers.  

I am using moded 14.6 to support 6 GPU. Do you know with which driver i am supposed to try?

[blissz]

I found some nice kernel improvements to get about 20% speed increase on almost every kernel.
I will soon show some results
I know it's not as fast as the wolf0 binaries yet, but there is still lots of work to do.

[go6ooo1212]

Did someone try the new OMEGA driver ?

[JuanHungLo]

Did someone try the new OMEGA driver ?

I just tried it.  I lost about 6% hash rate from 14.7.  Uninstalling now.

[go6ooo1212]

Did someone try the new OMEGA driver ?

I just tried it.  I lost about 6% hash rate from 14.7.  Uninstalling now.

Thanks, I was thinking about it , but could find enough time ,and lucky me...

[djm34]

Did someone try the new OMEGA driver ?

I just tried it.  I lost about 6% hash rate from 14.7.  Uninstalling now.

Thanks, I was thinking about it , but could find enough time ,and lucky me...

actually (I haven't tried... the latest), but the moving to 14.9 and higher require some change to gain speed (in particular for the rotations...)

[MTJ151]

I actually noticed a very slight increase with the new drivers.... mining x11 with wolfs bat file & SGminer 5.0

Plus Assassins Creed Unity runs much better

[go6ooo1212]

Ive tried 14.11 beta couple of weeks ago , and there was real mess with it. So I returned to 14.7 RC3.
The is a lot of noise about the new Omega on the network, so I figured that would be some performance , but havent much time in testing it...

[MTJ151]

What speed are people getting with neo & 280x atm?? I got about 300k/h last time I checked... but not sure what progress have been made since... I get a bit lost in this thread.