[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[Gongolo]

Thanks for sharing the details.

The first screenshot is correct. This is the only configuration you need to do to enable the External Profit Switcher. The External Profit Switching feature operates by changing priorities of existing pools of an already running External Miner. See the documentation link for more details.

The other concepts like Managed Profit Miner and the configuration of Managed Profit Switching in the Options dialog are only for GPU and CPU mining - not for ASIC mining.

Thank you for your answer.
So external profit switching just starts as it is enabled in external miner cfg, correct?
If so, maybe AM never changed any priority yet, since current algo is still considered the most profitable.
Thanks.

[1715429355]

1715429355

[1715429355]

1715429355

[1715429355]

1715429355

[patrike]

Thanks for sharing the details.

The first screenshot is correct. This is the only configuration you need to do to enable the External Profit Switcher. The External Profit Switching feature operates by changing priorities of existing pools of an already running External Miner. See the documentation link for more details.

The other concepts like Managed Profit Miner and the configuration of Managed Profit Switching in the Options dialog are only for GPU and CPU mining - not for ASIC mining.

Thank you for your answer.
So external profit switching just starts as it is enabled in external miner cfg, correct?
If so, maybe AM never changed any priority yet, since current algo is still considered the most profitable.
Thanks.

It's correct that you only need to enable the profit switching in the Properties of your External Miner.

You can right click on the miner, select View Details and go to the Profit Switching tab. You will then see what the profit is for each of the pools on the miner and you can also use this information to verify that Awesome Miner is doing what it should.

[Gongolo]

Thanks for sharing the details.

The first screenshot is correct. This is the only configuration you need to do to enable the External Profit Switcher. The External Profit Switching feature operates by changing priorities of existing pools of an already running External Miner. See the documentation link for more details.

The other concepts like Managed Profit Miner and the configuration of Managed Profit Switching in the Options dialog are only for GPU and CPU mining - not for ASIC mining.

Thank you for your answer.
So external profit switching just starts as it is enabled in external miner cfg, correct?
If so, maybe AM never changed any priority yet, since current algo is still considered the most profitable.
Thanks.

It's correct that you only need to enable the profit switching in the Properties of your External Miner.

You can right click on the miner, select View Details and go to the Profit Switching tab. You will then see what the profit is for each of the pools on the miner and you can also use this information to verify that Awesome Miner is doing what it should.

Got it, thank you very much.

[trucobit]

https://www.dropbox.com/s/65evui8bz7w7vyp/Captura%20de%20pantalla%202018-08-22%20a%20las%2013.42.57.png?dl=0

Hello @patrike and @moobidoo, I have a problem with one of the users of my telegram group, who is embarrassed to write in the forum and they have me as a messenger.

I think it's a problem that can be quite common. He has 6 rigti of 1080ti, in a place of his mother who has a workshop. By day he does not have all the energy, and at night he does. Right now he is working with a generalized OC of day, and another global one at night.

So I suggest that in the properties of a miner, when we choose a protocol, for example neoscrytp in the GPU Clocking Profile section, it is a little wider. By default like this, but that there was the option to put double OC and that each one activates at a time.

For example

Neo to 9AM, choose moderate OC profile
Neo at 10 PM chooses aggressive OC profile

If you do not touch anything, it would be the default one that we now put in the normal way as in the capture. I leave capture in case there are doubts of where I say. That way he can put different OCs to each protocol or a-l-g-o, instead of just playing with two general OCs, because that is not to get maximum performance. Some protocols consume little and may have a higher OC of day and others are very demanding and would require a lower OC of day.

I told you that it is not my problem, it is the problem of another user of my telegram but that they have made me the official spokesperson.

Another thing, I want to give you the congratulations of my telegram group for the statistics, everyone will buy the Cloud service when there are statistics and I the first.

I leave capture of the area where you could solve this problem can choose two OC and two different hours to activate each. And if you leave the first by default and without time, it would be the same as right now. I hope you understand the problem

[jkminkov]

How can you make BTG work with mining pool hub profit switching?

enable EWBF miner,
go to options, second line is pools, add MPH or some other pool, from dropdown menu pick coin type, btg is listed last.
on second tab pool groups make one and check your pool name.
go to profit switching and check your custom pool,
you can add many different pools to your custom pools.
right click on my miners and view detail, you should get a price, if zero edit profile and set hashrate(put 1 TH and edit it after you see your hashrate), again it is listed last, make sure EWBF miner is default and additional command line has that --algo 144_5 --pers BgoldPoW

[jaye1701]

For some reason, I can't get the miner to show the electric cost. I go to options, profit switching, I input the power cost. But it still will not show.

I must be doing something wrong.  I have it on the profile as well. Thoughts?

[ayiphelmy]

this problem appears after upgrading new awesome... i already choose zenemy, cryptodroge and other miner software but not showing in benchmark page... what do i wong? before upgrade it's run normal

Thanks

[streaml1ne]

https://s20.postimg.cc/w4b3brjot/ZENEMY_ERROR.png

this problem appears after upgrading new awesome... i already choose zenemy, cryptodroge and other miner software but not showing in benchmark page... what do i wong? before upgrade it's run normal

Thanks

Confirmed this on two rigs of mine. Z-enemy specifically here. CryptoDredge shows up for me.

[jkminkov]

For some reason, I can't get the miner to show the electric cost. I go to options, profit switching, I input the power cost. But it still will not show.

I must be doing something wrong.  I have it on the profile as well. Thoughts?

edit profile, make sure you have some watts added against each algo.

[Allo-4ka]

patrike
Once again I want to say thank you for AM , in particular for setting the price of energy to each ant / rig (will the support for day / night be added?)

- Zencesh conducted re-brading https://blog.zencash.com/hello-horizen
- Up-to-date and new ICO
https://yadi.sk/d/_2ZrfhxI3WoaXx

[moppidoo]

(will the support for day / night be added?)

Have you tried the new rule action:

Set Property

to modify the power cost / kWh with time trigger (either globally / per profit profile)? I have not tried it, but it might work well for what you want.

[moppidoo]

https://www.dropbox.com/s/65evui8bz7w7vyp/Captura%20de%20pantalla%202018-08-22%20a%20las%2013.42.57.png?dl=0

Hello @patrike and @moobidoo, I have a problem with one of the users of my telegram group, who is embarrassed to write in the forum and they have me as a messenger.

I think it's a problem that can be quite common. He has 6 rigti of 1080ti, in a place of his mother who has a workshop. By day he does not have all the energy, and at night he does. Right now he is working with a generalized OC of day, and another global one at night.

So I suggest that in the properties of a miner, when we choose a protocol, for example neoscrytp in the GPU Clocking Profile section, it is a little wider. By default like this, but that there was the option to put double OC and that each one activates at a time.

For example

Neo to 9AM, choose moderate OC profile
Neo at 10 PM chooses aggressive OC profile

If you do not touch anything, it would be the default one that we now put in the normal way as in the capture. I leave capture in case there are doubts of where I say. That way he can put different OCs to each protocol or a-l-g-o, instead of just playing with two general OCs, because that is not to get maximum performance. Some protocols consume little and may have a higher OC of day and others are very demanding and would require a lower OC of day.

I told you that it is not my problem, it is the problem of another user of my telegram but that they have made me the official spokesperson.

Another thing, I want to give you the congratulations of my telegram group for the statistics, everyone will buy the Cloud service when there are statistics and I the first.

I leave capture of the area where you could solve this problem can choose two OC and two different hours to activate each. And if you leave the first by default and without time, it would be the same as right now. I hope you understand the problem

I guess this one is more complicated compared to just setting power cost (peak/off-peak) like what @Allo-4ka and some others asked, since power cost is really just changing 1 variable of the entire profit formula. Where as, changing over-clock / power-limit will affect multiple variables (hashrate, power consumption) which affects the outcome of the profit calculation and profit switching decision. Right now, it's probably easiest to just set timed rules to switch between profit profiles (one with low-Power, one with High-Power) and benchmark them separately.

[trucobit]

His problem is that day, where he has the rigs is a workshop, and he can not have access to all the energy to run the rigs at 100%, and he wants to lower the OC so that the workshop and the Rigs work. And then at night increase the OC to the maximum you can to maximize income.

I suppose this kind of situation will happen to many people. It does not have to do with the price of electricity, only with electricity availability when sharing electricity with a house, a workshop etc ...

[Dalba]

Hello Patrike,
I would have another request regarding display of values.
In the different tabs, could you display profit and revenue values in the currency chosen AND in BTC ?
For example in online services tab i would like to see something like this :

Revenue :
Day: 3 € / 0.0003 BTC

Do you think it's possible ?

[Burnie]

His problem is that day, where he has the rigs is a workshop, and he can not have access to all the energy to run the rigs at 100%, and he wants to lower the OC so that the workshop and the Rigs work. And then at night increase the OC to the maximum you can to maximize income.

I suppose this kind of situation will happen to many people. It does not have to do with the price of electricity, only with electricity availability when sharing electricity with a house, a workshop etc ...

Have two profit profiles - with different OC/GPU settings. (the benchmarks will most likely be different too)

Add rule "lowpower"
- apply to selected miners
- trigger "Time" monday-sunday  10 pm
- action apply profit profile - select the low power profile

Add rule "highpower"
- apply to selected miners
- trigger "Time" monday-sunday  09 am
- action apply profit profile - select hig power profile

Of course you could add the action "apply gpu clocking profile", but then it is using the same benchmarks...

[darius510]

I'd like to put in another request for customizable columns in the main view. There's so much more information I'd like to see at a glance.

For example, I've been having a weird problem where specific mining software seems to disable itself and go back to ccminer, which is much less efficient than z-enemy, t-rex or cryptodredge. But I only notice this when I see that its not hashing as fast as it should, and then I click it and see the problem.

I'd prefer it if at least every single data entry under the summary could be displayed as a column, and let each user decide what information is most relevant to them. Some might want to see hosts or whatever.

Personally I'd like to see software, windows uptime and current GPU clocking profile. That way I can see at a glance if anything is not where I want to be in terms of software or stability.

[Allo-4ka]

Have you tried the new rule action:
Set Property
to modify the power cost / kWh with time trigger (either globally / per profit profile)? I have not tried it, but it might work well for what you want.

No, I did not make a new rule, t. only today noticed an update showing the cost of kW for each profile
But my idea in the other, so as not to reduce the hasht to ant, and send the command to the relay IP
(example IP:10001 - include the 1st port, IP:10002 - turn off the 2nd port, etc.), to enable and disable the corresponding ant, depending on the time

Sorry for my Google-English

[GoRdiE]

@patrike

Hi patrike,

I have a rig with 6 GPU's. Three miners. Usually 2 GPU's per miner. All the GPU's identical (1070ti)

I always set the benchmark in only one GPU. And only in one profile (NVIDIA - 1 GPU) had the hashrate and the power used per GPU (120W).

When I am mining with 1 miner with more than one GPU, the Reneuve is ok but only apply the cost of the 1 GPU. I always have three miners and sometimes each miner with different GPU selection (1, 2 or more). The cost of the miner isn´t right when the miner has more than one GPU. The cost is only applied to one miner and no by GPU. This forces me to make miners of only one GPU so that the profit is true or make as many profiles as miners have with different gpus (profile 1 - miner with 1 gpu...profile 2 - miner with 2 gpus ...) it is not logical.
the cost has to be linked to the number of gpus that is used per miner

Excuse my english. Understand me?

[coinbizarre]

@patrike
I have a question about awesome miner connection to the miner, looking at the detailed log it looks like AM make an API call to the miner every second, doesn’t this cause a performance issue for the miner

[patrike]

this problem appears after upgrading new awesome... i already choose zenemy, cryptodroge and other miner software but not showing in benchmark page... what do i wong? before upgrade it's run normal

Thanks

Confirmed this on two rigs of mine. Z-enemy specifically here. CryptoDredge shows up for me.

Is sounds like some configuration in the Profit profile is lost or has changed. If you find out more details or a few steps how to reproduce the issue - please let me know. I would really like to understand what's going wrong here. Thanks!