[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

Have you tried the new rule action:
Set Property
to modify the power cost / kWh with time trigger (either globally / per profit profile)? I have not tried it, but it might work well for what you want.

No, I did not make a new rule, t. only today noticed an update showing the cost of kW for each profile
But my idea in the other, so as not to reduce the hasht to ant, and send the command to the relay IP
(example IP:10001 - include the 1st port, IP:10002 - turn off the 2nd port, etc.), to enable and disable the corresponding ant, depending on the time

Sorry for my Google-English

As moppidoo pointed out, you can use the rules to schedule behavior in Awesome Miner. Is it that you want to stop or power off your Antminers at certain times? If you have any external applications that control the power, you can call them via the rules as well.

[1714909318]

1714909318

[1714909318]

1714909318

[1714909318]

1714909318

[1714909318]

1714909318

[patrike]

Hello Patrike,
I would have another request regarding display of values.
In the different tabs, could you display profit and revenue values in the currency chosen AND in BTC ?
For example in online services tab i would like to see something like this :

Revenue :
Day: 3 € / 0.0003 BTC

Do you think it's possible ?

Thanks for your feedback. There have been a few similar requests about display in both USD and BTC. It will probably be supported in the future - the main difficulty is to fit all the information in the user interface in a readable way as there can be values for both revenue and profit as well.

[patrike]

I'd like to put in another request for customizable columns in the main view. There's so much more information I'd like to see at a glance.

For example, I've been having a weird problem where specific mining software seems to disable itself and go back to ccminer, which is much less efficient than z-enemy, t-rex or cryptodredge. But I only notice this when I see that its not hashing as fast as it should, and then I click it and see the problem.

I'd prefer it if at least every single data entry under the summary could be displayed as a column, and let each user decide what information is most relevant to them. Some might want to see hosts or whatever.

Personally I'd like to see software, windows uptime and current GPU clocking profile. That way I can see at a glance if anything is not where I want to be in terms of software or stability.

There is a feature where you can customize the Progress column and use expressions to get additional information about the miner to be displayed. See:
https://support.awesomeminer.com/support/solutions/articles/35000086023-customize-progress-field

There is also an example on the page above for displaying Windows update. Current GPU clocking profile is however not yet supported.

[patrike]

@patrike

Hi patrike,

I have a rig with 6 GPU's. Three miners. Usually 2 GPU's per miner. All the GPU's identical (1070ti)

I always set the benchmark in only one GPU. And only in one profile (NVIDIA - 1 GPU) had the hashrate and the power used per GPU (120W).

When I am mining with 1 miner with more than one GPU, the Reneuve is ok but only apply the cost of the 1 GPU. I always have three miners and sometimes each miner with different GPU selection (1, 2 or more). The cost of the miner isn´t right when the miner has more than one GPU. The cost is only applied to one miner and no by GPU. This forces me to make miners of only one GPU so that the profit is true or make as many profiles as miners have with different gpus (profile 1 - miner with 1 gpu...profile 2 - miner with 2 gpus ...) it is not logical.
the cost has to be linked to the number of gpus that is used per miner

Excuse my english. Understand me?

I think you should use the concept of Profile Groups in this case. Your profit profile represents the hashrate and power usage for a single GPU - and that's perfectly fine. In addition, you can add a Profile group where you specify that you have two GPU's based on your profit profile. See the section "Profile groups":
https://support.awesomeminer.com/support/solutions/articles/35000086086-profit-switching-for-gpu-and-cpu-mining#profile

You would then specify that your Managed Profit Miner should be based on your Profile group (two GPU's) instead of your Profit profile (one GPU). That should make the power cost be correct as well.

[patrike]

@patrike
I have a question about awesome miner connection to the miner, looking at the detailed log it looks like AM make an API call to the miner every second, doesn’t this cause a performance issue for the miner

Awesome Miner request the status from the miner API every 5 seconds by default. You can also right click on an External Miner and select Properties to change this interval.

No matter if you have an ASIC miner or GPU miner, the mining calculations are made on the actual ASIC chip or GPU while the API requests are processed on the CPU. For this reason, there shouldn't be any performance impact.

[coinbizarre]

@patrike
I have a question about awesome miner connection to the miner, looking at the detailed log it looks like AM make an API call to the miner every second, doesn’t this cause a performance issue for the miner

Awesome Miner request the status from the miner API every 5 seconds by default. You can also right click on an External Miner and select Properties to change this interval.

No matter if you have an ASIC miner or GPU miner, the mining calculations are made on the actual ASIC chip or GPU while the API requests are processed on the CPU. For this reason, there shouldn't be any performance impact.

I meant to say 5 seconds, but still every 5 seconds it opens a socket connection, sends an API command and disconnects the socket that must have some effect on the performance, have you done any performance benchmark

[patrike]

@patrike
I have a question about awesome miner connection to the miner, looking at the detailed log it looks like AM make an API call to the miner every second, doesn’t this cause a performance issue for the miner

Awesome Miner request the status from the miner API every 5 seconds by default. You can also right click on an External Miner and select Properties to change this interval.

No matter if you have an ASIC miner or GPU miner, the mining calculations are made on the actual ASIC chip or GPU while the API requests are processed on the CPU. For this reason, there shouldn't be any performance impact.

I meant to say 5 seconds, but still every 5 seconds it opens a socket connection, sends an API command and disconnects the socket that must have some effect on the performance, have you done any performance benchmark

I've never seen any indication that it would be slower. For ASIC and GPU mining the CPU load is typically low anyway, so consuming a few more CPU cycles on a separate thread should be fine.

[svedr]

Hello !

I want mine GINCOIN (lyra2z) with AMD rx570/580 card.
I try tried many settings but does not work.
SGminer not start, i have error "failed to start miner process (Sgminer, Lyra2z) 1. Security or antivirus remove..... 2. Use diagnostic...."
In diagnistic i  see :
> [15:30:17] Global quota greatest common denominator set to 1
> [15:30:17] Setting pool 0 name to GINCoin
> [15:30:17] Setting pool 0 profile to AMD X-algorithm
> [15:30:17] Setting pool 0 N-factor to 10
> [15:30:17] Setting pool 0 algorithm to
> [15:30:17] Algorithm  not found, using ckolivas.
> [15:30:17] Setting profile 0 name to AMD X-algorithm
> [15:30:17] Unexpected extra commandline arguments
> [15:30:17] Algorithm  not found, using ckolivas.                   
> [15:30:17] Unexpected extra commandline arguments                   
Failed to start miner process: Process has exited, so the requested information is not available.
Failed to start miner in Diagnostics mode
Diagnostics completed


Can you please help me ?

Can someone tell me what is hashrate LYRA2Z for RX 570 4Gb on Windows ?
If i start sgminer i see only gpu0 ... ( i have 5 GPU)

[GoRdiE]

Hi all, and thanks @patrike for the awesome program.

One question.

When performing a benchmark, miners appear and test in algorithms that are disabled. Before, this did not happen, I think. I leave you some captures. Why it can be? Is it a problem with my configuration? For example, the ccminer-krnlx-xevan is configured as compatibility mode full on ccminer. The algo Allium is enabled due to the compatibility with ccminer but in the configuration of the krlnx is disable. By performing the benchmark, it appears and attempts to perform it giving a logical error. And so with almost all the software. Which makes Bencmark very tedious. Am I performing a bad configuration?

https://i.imgur.com/Z8omzO9.jpg

https://imgur.com/a/LAoKwPX

[ayiphelmy]

Please add mkxminer lyra2v2 for amd
Link >> https://bitcointalk.org/index.php?topic=2360168.0

Thanks

[svedr]

mkxminer is not for Lyra2z (GinCoin) 

[ayiphelmy]

mkxminer is not for Lyra2z (GinCoin) 

who said for lyra2z? Read please ! Lyra2v2 (Lyra2rev2)

[ayiphelmy]

Hi all, and thanks @patrike for the awesome program.

One question.

When performing a benchmark, miners appear and test in algorithms that are disabled. Before, this did not happen, I think. I leave you some captures. Why it can be? Is it a problem with my configuration? For example, the ccminer-krnlx-xevan is configured as compatibility mode full on ccminer. The algo Allium is enabled due to the compatibility with ccminer but in the configuration of the krlnx is disable. By performing the benchmark, it appears and attempts to perform it giving a logical error. And so with almost all the software. Which makes Bencmark very tedious. Am I performing a bad configuration?



https://imgur.com/a/LAoKwPX

it's happening to me after some research my config file was corrupt when update new version... so i start all from begining and erase all awesome folder before make new install

[GoRdiE]

@patrike

An improvement.

Replace the 'window hashrate save' by hasrate and save power and extend also to save the power. So we can update the profiles more completely (new hashrate and new power)

https://i.imgur.com/EfOIbzN.jpg

[Snapper00]

Found the setting included in the pool configuration...

Can this be added to the Pool Group configuration possibly?

[Maybe this is in the software already, but I did not see it.

I am looking for a scaling factor for the monthly revenue/profits.
In my case, there are 4 hours M-F that I do not mine.  So I would like the profit/revenue calculation for the month to allow for a scaling factor from 0 through 1 so that I can adjust for the missing hours per month (or for any other reason, does not really matter why actually).

So if I assume a month is 28 days, this equals 24*7*4=672 hours.  If I know I will lose 20 hours a week mining, that would be 80 hours not mined out of the 672.  I would then want to put in (672-80)/672 as my scaling factor for the calculation for the monthly revenue/profit figure.

Where I live, my power rates are one low rate for weekends, and 3 different rates for M-F.  So what I do is to calculate the average rate for the times I mine and put that into the cost of a KW/h.  Another option would maybe have a field that asks how many hours are mined each day which may result in a more accurate figure since the number of days in a month varies which would calculate the total hours per month and I would still have to use my own calculated power average.  Just a thought.


Thanks for an Awesome piece of software, top notch!]

[Snapper00]

I noticed when I have a string in the command line that when I switch between managed miner and managed profit miner once or twice that the command line item disappears.  Intended?

[darius510]

I'm still getting massive delays in the UI. I noticed that it's fine for the first minute or two after I open the program, and then gets progressively worse, usually to the point where i need to force terminate AM and start from scratch. There's definitely something weird going on, Ive tried performance mode, Ive tried turning off my rules, beyond that I'm not sure what can be causing these UI freezes.

[svedr]

Nobody can help me, how mine GINCOIN with AMD card ?

[moppidoo]

Nobody can help me, how mine GINCOIN with AMD card ?

Find a sgminer fork with supported kernels, ones included with AM doesn't seem to support Lyra2z.

or run TDXMiner on Linux

[svedr]

i try lot of sgminer version, but all sgminer work only with one gpu ( i have 5 gpu )