patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
September 04, 2018, 11:36:10 AM |
|
umm, you can add that to the profit profile specifically for sgminer (and forks)
also, you need to specify the correct number, 0, 1 or 2 for the --gpu-platform, it's rig specific.
check sgminer --help for details.
*** worst come to worst, just use command line and mine to someone else's address using examples for starters, there you should see all the error messages in the console. of course, if you are familiar with command line, then just replace the command, addresses as you see fit. Else, consider it a tiny donation.
Was trying to set it for the Managed Software but it would not take. Going into each device profile and having to add it is not ideal, but can work for now. It runs, but still does not coy the benchmark result back to the test page for saving to the profile. Hum ... Thank you. Is the scenario that the mining software window is opened and that you can see that it's hashing, but once completed, the hashrate isn't showing up in the benchmark window?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
September 04, 2018, 12:37:41 PM |
|
Awesome Miner version 5.4.5 (Development preview of 5.5) is now available. It's a smaller update to the previous development version that address issues related to: - Configuration not received correctly for Remote Agent on Linux - Execution of rules based on failed process trigger corrected, to prevent blocking user interface updates - T-Rex miner launched again (a second instance) after restarting Remote Agent
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
NetWhiz
Newbie
Offline
Activity: 49
Merit: 0
|
|
September 04, 2018, 05:42:21 PM |
|
Was trying to set it for the Managed Software but it would not take. Going into each device profile and having to add it is not ideal, but can work for now.
It runs, but still does not coy the benchmark result back to the test page for saving to the profile. Hum ...
Thank you.
Is the scenario that the mining software window is opened and that you can see that it's hashing, but once completed, the hashrate isn't showing up in the benchmark window? Correct.
|
|
|
|
darius510
Newbie
Offline
Activity: 45
Merit: 0
|
|
September 04, 2018, 06:31:53 PM |
|
Awesome Miner version 5.4.5 (Development preview of 5.5) is now available. It's a smaller update to the previous development version that address issues related to: - Configuration not received correctly for Remote Agent on Linux - Execution of rules based on failed process trigger corrected, to prevent blocking user interface updates - T-Rex miner launched again (a second instance) after restarting Remote Agent
When I try to upgrade the linux remote agent, it fails: Sep 04 18:30:50 worker systemd[1]: awesome.service: Service hold-off time over, scheduling restart. Sep 04 18:30:50 worker systemd[1]: Stopped Awesome Miner Remote Agent. Sep 04 18:30:50 worker systemd[1]: Started Awesome Miner Remote Agent. Sep 04 18:30:50 worker systemd[1]: awesome.service: Main process exited, code=exited, status=203/EXEC Sep 04 18:30:50 worker systemd[1]: awesome.service: Unit entered failed state. Sep 04 18:30:50 worker systemd[1]: awesome.service: Failed with result 'exit-code'. Sep 04 18:30:50 worker systemd[1]: awesome.service: Service hold-off time over, scheduling restart. Sep 04 18:30:50 worker systemd[1]: Stopped Awesome Miner Remote Agent. Sep 04 18:30:50 worker systemd[1]: awesome.service: Start request repeated too quickly. Sep 04 18:30:50 worker systemd[1]: Failed to start Awesome Miner Remote Agent.
|
|
|
|
healthcarep
Newbie
Offline
Activity: 72
Merit: 0
|
|
September 04, 2018, 07:22:46 PM |
|
The problem with the calculators is that they are based on what you are getting right now this instant. So if you are just an individual mining on a small scale you probably can't take advantage of the swings up before they swing back down and you've wasted time mining at lower profit.
I'd pick 3 or 4 coins you think are good and set up the auto switch to only do those ones.
|
|
|
|
JimBrown462
Newbie
Offline
Activity: 59
Merit: 0
|
|
September 04, 2018, 07:59:19 PM |
|
Awesome Miner version 5.4.5 (Development preview of 5.5) is now available. It's a smaller update to the previous development version that address issues related to: - Configuration not received correctly for Remote Agent on Linux - Execution of rules based on failed process trigger corrected, to prevent blocking user interface updates - T-Rex miner launched again (a second instance) after restarting Remote Agent
Can confirm that T-Rex was found already mining after update. ...jim
|
|
|
|
|
streaml1ne
Newbie
Offline
Activity: 32
Merit: 0
|
|
September 05, 2018, 03:38:47 PM |
|
It would be nice to get these updates in for 4.6, but also could Cryptonight be enabled for CryptoDredge? Right now it won't show up in the benchmark for several algos that Dredge (and other miners, iirc) support.
|
|
|
|
Finnsk3
Newbie
Offline
Activity: 13
Merit: 0
|
|
September 06, 2018, 12:30:11 AM |
|
Anyone else have Awesome Miner not report revenue? As you can see here: http://stats.finnsk3.com/am.pngIt's also not just nicehash, I have seen miningpoolhub also report $0 for some algos. Any ideas? it's ruining all my stats
|
|
|
|
Regulater
Member
Offline
Activity: 273
Merit: 12
|
|
September 06, 2018, 01:11:29 AM |
|
Anychance you can add the cuda 9.2 version of Enemy Miner instead of only the Cuda 9.1. Supposedly Cuda 9.2 version is slightly faster.
|
|
|
|
Finnsk3
Newbie
Offline
Activity: 13
Merit: 0
|
|
September 06, 2018, 01:31:43 AM |
|
Anychance you can add the cuda 9.2 version of Enemy Miner instead of only the Cuda 9.1. Supposedly Cuda 9.2 version is slightly faster.
Just change the url in managed software
|
|
|
|
Regulater
Member
Offline
Activity: 273
Merit: 12
|
|
September 06, 2018, 01:54:12 AM |
|
Anychance you can add the cuda 9.2 version of Enemy Miner instead of only the Cuda 9.1. Supposedly Cuda 9.2 version is slightly faster.
Just change the url in managed software Well i could download it too and upload to all my rigs, but was hoping it could be implemented so i dont have to do it everytime.
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
September 06, 2018, 10:51:46 AM |
|
Was trying to set it for the Managed Software but it would not take. Going into each device profile and having to add it is not ideal, but can work for now.
It runs, but still does not coy the benchmark result back to the test page for saving to the profile. Hum ...
Thank you.
Is the scenario that the mining software window is opened and that you can see that it's hashing, but once completed, the hashrate isn't showing up in the benchmark window? Correct. Can you please send me your log file by mail and indicate the time of the issue. I can then review the command line Awesome Miner used to launch the mining software in benchmark mode to see if there are any issues there. Was it only sgminer benchmark that didn't work as expected or was it any other mining software as well that failed? Is Sgminer working fine when when you use it outside the benchmark, at show up with hashrate in the list of miners in Awesome Miner?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
September 06, 2018, 10:53:35 AM |
|
Awesome Miner version 5.4.5 (Development preview of 5.5) is now available. It's a smaller update to the previous development version that address issues related to: - Configuration not received correctly for Remote Agent on Linux - Execution of rules based on failed process trigger corrected, to prevent blocking user interface updates - T-Rex miner launched again (a second instance) after restarting Remote Agent
When I try to upgrade the linux remote agent, it fails: Thanks for your comments on this. I found out that the permission on the file AwesomeMiner.RemoteAgent.Linux wasn't set with executable flag after the upgrade. If you manually do chmod 755 on this file it should start fine after the upgrade. Please note that even if I correct this upgrade issue in the next release, it will not be until you upgrade to the next-next release the new upgrade changes will be used.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
September 06, 2018, 10:58:08 AM |
|
Anychance you can add the cuda 9.2 version of Enemy Miner instead of only the Cuda 9.1. Supposedly Cuda 9.2 version is slightly faster.
Just change the url in managed software Well i could download it too and upload to all my rigs, but was hoping it could be implemented so i dont have to do it everytime. The reason why Cuda 9.1 is included by default for the moment is that all users are not running with the latest drivers. In the past when Ccminer changed to a later Cuda version, I had quite a number of upset e-mail messages about that the mining didn't start (due to old GPU drivers). The plan is of course to move to the Cuda 9.2 versions later on. The most recent version of Awesome Miner is presenting the GPU driver versions on the Summary tab, and I've been thinking of using this information to give warnings if too old GPU drivers are being used. Thanks for the feedback!
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
September 06, 2018, 11:02:17 AM |
|
Anyone else have Awesome Miner not report revenue? As you can see here: It's also not just nicehash, I have seen miningpoolhub also report $0 for some algos. Any ideas? it's ruining all my stats Please check the following: 1) For nicehash, please check Options dialog, Online Services section, and make sure the "Nicehash domain matching field" uses the default value nicehash.com and nothing else. 2) For the entries on this page, also check that the profit factor is set to 1 (or at least not 0). 3) Are the correct information showing up on the Online Services tab in Awesome Miner?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
September 06, 2018, 11:04:16 AM |
|
It would be nice to get these updates in for 4.6, but also could Cryptonight be enabled for CryptoDredge? Right now it won't show up in the benchmark for several algos that Dredge (and other miners, iirc) support. In the next release of Awesome Miner that is about to be released, the new CryptoDredge and Z-enemy miners will be included. For CryptoDredge, the Cryptonight based algorithms will also be enabled by default. For the benchmark, please also note that the only algorithms listed are those where you have a pool enabled for the profit switcher (see Options dialog, Profit Switching section)
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
Dalba
Newbie
Offline
Activity: 92
Merit: 0
|
|
September 06, 2018, 12:54:16 PM |
|
Hello Patrike, I wanted to talk again about the possibility of saving power used by graphic cards when benchmarking. You already stated that it would be possible only with compatible miners. But would it be possible for AM to look at those values directly whatever mining software is used ? As software like Hardware Monitor or GpuZ....
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
September 06, 2018, 01:21:39 PM |
|
Hello Patrike, I wanted to talk again about the possibility of saving power used by graphic cards when benchmarking. You already stated that it would be possible only with compatible miners. But would it be possible for AM to look at those values directly whatever mining software is used ? As software like Hardware Monitor or GpuZ....
This feature is not yet implemented. Either it can be supported by getting the power usage via nvidia-smi or via some of the mining software. The benefit of using nvidia-smi is that it's independent of mining software being used. What the latest version of Awesome Miner support is an improved "Save hashrate" feature for a running miner, where it also can save the power usage to the profile.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
September 06, 2018, 01:35:27 PM |
|
Awesome Miner Version 5.5
ASIC mining - The Remote Proxy can do automatic discovery of new ASIC miners on the network and automatically add and remove new miners in Awesome Miner. Intended for large scale mining operations. GPU mining - Remote Agent on Linux (beta). See the documentation on the web site for details about the Linux support. - Display of AMD and nVidia GPU driver version on the Summary tab for each Managed Miner and Managed Profit Miner - The dialog to save hashrate can also save the current power usage for the selected GPU (if reported by the mining software) - Benchmark can be started with custom command line arguments Performance - Significant performance improvements to support very large number of miners - User interface more responsive when using large number of miners Configuration - Introducing multiple columns when displaying External Miners, Managed Miners and Pools in the options dialog - Profit switching interval can be specified in both minutes and seconds and allows an interval as low as 30 seconds - Profit switching setting for the minimum time a miner will stay on the same pool before i can change to another pool - Filtering for Managed Template section of Options dialog - Pools and online service entries can be configured with a Personalization string to support Equihash variants that requires this string to be provided when mining - The maximum API connection timeout can be configured to 30 seconds User interface - Selected lines on the Balance tab can be copied to the clipboard using Ctrl+C - Updated coin images and cleanup of old coins - Allow sorting by software in the Benchmark dialog Features and integration - Include the Mining Pool Hub pool for BTG and the Zergpool pools for Equihash variants Rules and API - Added API to get a list of coins and information from the Coins tab (/api/coins/stats) - Added API to get a list of multi coin pools and information from the Online Services tab (/api/onlineservices/stats) - Added API to get a list of all Profit profiles (/api/profitprofiles) Mining software - Added mining software: SgMiner-kl 1.0.5 - CastXMR 1.4 with Cryptonight-Fest algorithm support - SrbMiner 1.6.7, including support for generating the initial configuration file - T-Rex miner 0.6.3 - CryptoDredge 0.9.1 - Z-enemy miner 1.18 Corrections - Correction to scenario where pools are added from the web interface and used for performing actions on ASIC miners - Correction to trigger for Revenue / Profit to not trigger too often - Correction to user defined Managed Software to prevent new algorithms, that are disabled for the specific software, to show up in the Benchmarking window - Correction to uptime display for Excavator miner version 1.5 - Correction to execution of rules based on failed process trigger to prevent blocking user interface updates - Correction to T-Rex miner integration to prevent multiple instances of the mining software to be started - Correction to the test message feature for the e-mail settings, to support sending the test message to multiple addresses - Correction to Profit Profile where specific mining software could end up being unselected - Updated support for JCE miner with mixed GPU and CPU mining threads - Updated integration with the block explorer for Ethereum to continue the support for Ethereum wallet balance - Minor corrections
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
|