[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[Dalba]

Hello Patrike,
I wanted to talk again about the possibility of saving power used by graphic cards when benchmarking.
You already stated that it would be possible only with compatible miners.
But would it be possible for AM to look at those values directly whatever mining software is used ? As software like Hardware Monitor or GpuZ....

This feature is not yet implemented. Either it can be supported by getting the power usage via nvidia-smi or via some of the mining software. The benefit of using nvidia-smi is that it's independent of mining software being used.

What the latest version of Awesome Miner support is an improved "Save hashrate" feature for a running miner, where it also can save the power usage to the profile.

Sure it would be great to use an independent software like nvidia-smi !
Until you implement this in AM, i won't bother anymore with power consumption because if you want to be precise, you should make new measure each time you change your mining software. When you have 3 or more profit profiles, you can spend more time making measures than mining...

[trucobit]

Hello
There is something wrong with T-Rex miner when i try to use it throug "managed templates" and definied pool. It alwasy eats first two letters from pool adress.
I tried to add random two letters to push through the correct adress but it's not connectting too. The problem exists all the time when i started use your software, im unable to use T-Rex through Awsomeminer. Other miner like z-enemy, ccminer works fine.

I wasn't able to reproduce this issue, but I would like to learn more as it be a very specific scenario where this doesn't work correctly.

Can you share the diagnostics output (the Diagnostics button in the toolbar) where the first two letters are missing? Thanks!

t-rex is extremely unstable when an intensity is indicated, if it is left undefined, it does not usually give problems. Then it is to look for an intensity that does not cause it.

I in a rig when mine x17, 16 r and s, I use T-rex, and if I use a moderate intensity defined, sometimes I throw an error box. When you try it for the second time it enters without problems.

Solution. try not to use intensity. Even putting the same intensity that applies automatically, gives failures, is something that should still debug a lot in that miner, it is not Awesome's fault. Test without intensity and I'll check it.

[zmago]

@patrike

hi. is there a way to list my new pool into your awsome miner application? how much would it cost?
link here: https://bitcointalk.org/index.php?topic=5024298.0

[NetWhiz]

Was it only sgminer benchmark that didn't work as expected or was it any other mining software as well that failed? Is Sgminer working fine when when you use it outside the benchmark, at show up with hashrate in the list of miners in Awesome Miner?

Only sgminer. No, sgminer does not report any data back to AM. I have tried with "--text-only" as well. What address should I send the log to again?

I have tried it locally and on a remote miner with the same issue ... not data being sent back to AM for display. The console shows and it says it is running, but no API data.

[vitlab]

How in the program it is possible to change the location of the USA on EUROPE for zergpool?
Thank you.

[toptek12]

Was it only sgminer benchmark that didn't work as expected or was it any other mining software as well that failed? Is Sgminer working fine when when you use it outside the benchmark, at show up with hashrate in the list of miners in Awesome Miner?

Only sgminer. No, sgminer does not report any data back to AM. I have tried with "--text-only" as well. What address should I send the log to again?

I have tried it locally and on a remote miner with the same issue ... not data being sent back to AM for display. The console shows and it says it is running, but no API data.

have you tried for the api data to show

Code:

--api-listen --api-allow W:127.0.0.1/24,W:192.168.1.0/24

[NetfetMiningCompany]

Id like to request an option if it hasnt been thought about already.

There any way we can reset the time connected (the grey number under the temperature") so we can keep track of how long its been on a pool? Like antminers will be connected for weeks while there is a ton of pool changing happening. Without having to restart it that is.

If its easy to do, is this possible? Even if its just in the right click menu as "reset counter" or something.

[trucobit]

please Coinscalculator to 3h average, full interesant and easy by programer

[patrike]

@patrike

hi. is there a way to list my new pool into your awsome miner application? how much would it cost?
link here: https://bitcointalk.org/index.php?topic=5024298.0

For the moment it's only the pools that are requested by many users that are included by default. Any pool can of course be added manually so some pool operator puts instructions on their web site how to use Awesome Miner for their pool.

For the future I'm planning to have a more flexible way where the community can define pools, and anyone can include these pools from a larger library of pools.

[patrike]

Was it only sgminer benchmark that didn't work as expected or was it any other mining software as well that failed? Is Sgminer working fine when when you use it outside the benchmark, at show up with hashrate in the list of miners in Awesome Miner?

Only sgminer. No, sgminer does not report any data back to AM. I have tried with "--text-only" as well. What address should I send the log to again?

I have tried it locally and on a remote miner with the same issue ... not data being sent back to AM for display. The console shows and it says it is running, but no API data.

A Managed Miner (and Managed Profit Miner) do have API settings for cgminer/sgminer where the API should be enabled by default. These settings are however not visible if you have a Managed Profit Miner. What you could try is to re-create the miner to get all the default settings and see if it's working better.

As toptek12 suggested (see https://bitcointalk.org/index.php?topic=676942.msg45411663#msg45411663), you could also manually try to enable the API via the command line.

If you are unable to resolve the issue, please send me an e-mail (info[at]awesomeminer.com) and include the log file. I'm interested in looking at the command line that Awesome Miner uses to launch sgminer.

[patrike]

How in the program it is possible to change the location of the USA on EUROPE for zergpool?
Thank you.

Awesome Miner supported this in the past, but then the recommendation from the Zergpool operator was to not use that concept anymore and Awesome Miner was changed according to this.

[patrike]

Id like to request an option if it hasnt been thought about already.

There any way we can reset the time connected (the grey number under the temperature") so we can keep track of how long its been on a pool? Like antminers will be connected for weeks while there is a ton of pool changing happening. Without having to restart it that is.

If its easy to do, is this possible? Even if its just in the right click menu as "reset counter" or something.

This is the uptime of the miner and Awesome Miner is displaying what the miner itself is reporting.

I think what Awesome Miner needs in general is better insight related to how much time is spent on each pool, algorithm and so on. Thanks for your feedback!

[patrike]

Hi are you looking to add support for progpow and BCI

I've had a few requests by mail about this one recently but I've not had the time to investigate yet. Do you have any link with more information about it? Is there a monitoring interface (API) where Awesome Miner could connect? Thanks!

[patrike]

please Coinscalculator to 3h average, full interesant and easy by programer

In the past this wasn't provided by the API, but I had a look again and it's at least possible to get the 3h Difficulty value. There are however no 3h values for exchange rate and so on.

[mylucky]

My computer is not working. Warning is not allowed to start.

[badbart]

Anyway to make the miner profit switch between pools I set up?

[moppidoo]

Anyway to make the miner profit switch between pools I set up?

https://support.awesomeminer.com/support/solutions/articles/35000085819-can-i-include-my-own-pools-and-coins-in-the-profit-switcher-

[toptek12]

I figured out a way to use Awesome miner with lolMiner_v043_Win64 and see stats using the Generic miner if anyone wants to know i even set up a template, use the  black screen console, awesome miner still lets you use afterburner server and you can see the temps, that's all i need to see other then the speeds, which I can see using the black screen console for remote rigs. works just as good if you don't care if you see how much your making per day etc ....



it looks like Generic miner had some improvements done to it sense i used it a year ago .

[Nuttawut]

Z-ENEMY VER 1.19 (PUBLIC) From: Dk & Enemy (z-enemy)

IMPORTANT:
For maximum performance make sure you have latest drivers  (ver. 398+)
http://www.nvidia.com/Download/index.aspx

- Major performance improvements: 5-7% in various algos  (x16 ,x17 , bitcore, c11 , hex , etc ..)
- Stability improvements

32-bit version seems to be faster in some algos again, feel free to test it !

Have fun !

Windows :
Cuda 9.1 x32 : https://mega.nz/#!AHgUyQAT!JkbrD5e22ISRM92mpAwa9hTlNgon7T9i995RYqf3OBI
Cuda 9.1 x64 : https://mega.nz/#!lPgmhKiJ!VejTVr_HrsCPz2cQ2i9QpmtT0jZF1k9o6qbwcwMjL4Y

Cuda 9.2 x32 : https://mega.nz/#!8T4STYqI!S030a6ring6PRM-NMmbPpKP01aIwFJ54jFIgizFspPk
Cuda 9.2 x64 : https://mega.nz/#!1OpiVARD!OJJnd4qVGdVJVL0Mmw3A7FBCCj5y3tJT3GkB249XsVw

Linux: (HiveOS, PiMP OS , EthOS & Ubuntu)
Cuda 9.0 : https://mega.nz/#!1WgmVKSZ!FEzFrexYQrBHu7jkbDI_RYXogKy8n8-i0zZBMId3pSc
Cuda 9.1 : https://mega.nz/#!RPpkGKbD!aQEY1StU23-5YXvA0qUTWARGNXj26YWTmmdjRjNdkRc
Cuda 9.2 : https://mega.nz/#!JXhU2YTD!sd73_19oz-Vfizyhmp0nGSljH_g_3mw4DNtoroiORts

[MHyza]

Any news regarding implementing overclocking feature directly to AWSM instead of using MSI Afterburner service?


Also sgminer-kl is updated:

https://github.com/KL0nLutiy/sgminer-kl/releases/tag/kl-1.0.6

Changelog:
Add polytimos algo
Add geek (GeekCash) algo
Faster tribus (add midstate)
Fix --benchmark-sequence command for windows for x16r algo
Add support for Visual Studio 2017
Fix "block found" bug for x16s
Faster groestl/cubehash

To get best perfomance start with -X 256, also you could add -g 2, to execute algos in 2 threads, it could give you better perfomance. Also use -w 256 for phi algo