[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[yrk1957]

@patrike - Can you add support for Obelisk SC1? This is the API report:

Code:

Version: 5.7.2
API command: config
{
  "STATUS": [
    {
      "STATUS": "S",
      "When": 1540063726,
      "Code": 33,
      "Msg": "CGMiner config",
      "Description": "cgminer 4.10.0"
    }
  ],
  "CONFIG": [
    {
      "ASC Count": 2,
      "PGA Count": 0,
      "Pool Count": 1,
      "Strategy": "Failover",
      "Log Interval": 4,
      "Device Code": "",
      "OS": "Linux",
      "Hotplug": "None"
    }
  ],
  "id": 1
}
API command: summary
{
  "STATUS": [
    {
      "STATUS": "S",
      "When": 1540063726,
      "Code": 11,
      "Msg": "Summary",
      "Description": "cgminer 4.10.0"
    }
  ],
  "SUMMARY": [
    {
      "Elapsed": 11131,
      "MHS av": 558097.6,
      "MHS 4s": 598219.87,
      "MHS 1m": 497015.75,
      "MHS 5m": 543222.2,
      "MHS 15m": 563349.26,
      "Found Blocks": 1275,
      "Getworks": 264,
      "Accepted": 1274,
      "Rejected": 1,
      "Hardware Errors": 0,
      "Utility": 6.87,
      "Discarded": 7004,
      "Stale": 0,
      "Get Failures": 0,
      "Local Work": 30655,
      "Remote Failures": 0,
      "Network Blocks": 0,
      "Total MH": 6212237915.0,
      "Work Utility": 6.87,
      "Difficulty Accepted": 1382685.75638913,
      "Difficulty Rejected": 1080.64720139,
      "Difficulty Stale": 0.0,
      "Best Share": 18446744073709551615,
      "Device Hardware%": 0.0,
      "Device Rejected%": 84.7566,
      "Pool Rejected%": 0.0781,
      "Pool Stale%": 0.0,
      "Last getwork": 1540063726
    }
  ],
  "id": 1
}
API command: privileged
{
  "STATUS": [
    {
      "STATUS": "S",
      "When": 1540063726,
      "Code": 46,
      "Msg": "Privileged access OK",
      "Description": "cgminer 4.10.0"
    }
  ],
  "id": 1
}
API command: devs
{
  "STATUS": [
    {
      "STATUS": "S",
      "When": 1540063726,
      "Code": 9,
      "Msg": "2 ASC(s)",
      "Description": "cgminer 4.10.0"
    }
  ],
  "DEVS": [
    {
      "ASC": 0,
      "Name": "Obelisk",
      "ID": 0,
      "Enabled": "Y",
      "Status": "Alive",
      "Temperature": 0.0,
      "MHS av": 287319.48,
      "MHS 4s": 382178.92,
      "MHS 1m": 297734.81,
      "MHS 5m": 296463.16,
      "MHS 15m": 305676.76,
      "Accepted": 626,
      "Rejected": 1,
      "Hardware Errors": 0,
      "Utility": 3.37,
      "Last Share Pool": 0,
      "Last Share Time": 1540063722,
      "Total MH": 3199577436.0,
      "Diff1 Work": 627,
      "Difficulty Accepted": 678414.73150199,
      "Difficulty Rejected": 1080.64720139,
      "Last Share Difficulty": 1394.18747637,
      "Last Valid Work": 1540063722,
      "Device Hardware%": 0.0,
      "Device Rejected%": 172.352,
      "Device Elapsed": 11136
    },
    {
      "ASC": 1,
      "Name": "Obelisk",
      "ID": 1,
      "Enabled": "Y",
      "Status": "Alive",
      "Temperature": 0.0,
      "MHS av": 270574.3,
      "MHS 4s": 117316.4,
      "MHS 1m": 197532.46,
      "MHS 5m": 246833.41,
      "MHS 15m": 257684.04,
      "Accepted": 648,
      "Rejected": 0,
      "Hardware Errors": 0,
      "Utility": 3.49,
      "Last Share Pool": 0,
      "Last Share Time": 1540063684,
      "Total MH": 3012660479.0,
      "Diff1 Work": 648,
      "Difficulty Accepted": 704271.02488714,
      "Difficulty Rejected": 0.0,
      "Last Share Difficulty": 1394.18747637,
      "Last Valid Work": 1540063684,
      "Device Hardware%": 0.0,
      "Device Rejected%": 0.0,
      "Device Elapsed": 11134
    }
  ],
  "id": 1
}
API command: pools
{
  "STATUS": [
    {
      "STATUS": "S",
      "When": 1540063726,
      "Code": 7,
      "Msg": "1 Pool(s)",
      "Description": "cgminer 4.10.0"
    }
  ],
  "POOLS": [
    {
      "POOL": 0,
      "URL": "stratum+tcp://sc-us.luxor.tech:3333",
      "User": "****",
      "Status": "Alive",
      "Priority": 0,
      "Quota": 1,
      "Long Poll": "N",
      "Getworks": 264,
      "Accepted": 1274,
      "Rejected": 1,
      "Works": 23593,
      "Discarded": 7004,
      "Stale": 0,
      "Get Failures": 0,
      "Remote Failures": 0,
      "Last Share Time": 1540063722,
      "Diff1 Shares": 1275,
      "Proxy Type": "",
      "Proxy": "",
      "Difficulty Accepted": 1382685.75638913,
      "Difficulty Rejected": 1080.64720139,
      "Difficulty Stale": 0.0,
      "Last Share Difficulty": 1394.18747637,
      "Work Difficulty": 1394.18747637,
      "Has Stratum": true,
      "Stratum Active": true,
      "Stratum URL": "sc-us.luxor.tech",
      "Stratum Difficulty": 1394.18747637,
      "Has GBT": false,
      "Best Share": 18446744073709551615,
      "Pool Rejected%": 0.0781,
      "Pool Stale%": 0.0,
      "Bad Work": 32,
      "Current Block Height": 0,
      "Current Block Version": 0
    }
  ],
  "id": 1
}
API command: coin
{
  "STATUS": [
    {
      "STATUS": "S",
      "When": 1540063727,
      "Code": 78,
      "Msg": "CGMiner coin",
      "Description": "cgminer 4.10.0"
    }
  ],
  "COIN": [
    {
      "Hash Method": "Blake2b",
      "Current Block Time": 0.0,
      "Current Block Hash": "000000000000000000000000000000000000",
      "LP": true,
      "Network Difficulty": 1.8446744073709552E+19
    }
  ],
  "id": 1
}
API command: stats
{
  "STATUS": [
    {
      "STATUS": "S",
      "When": 1540063727,
      "Code": 70,
      "Msg": "CGMiner stats",
      "Description": "cgminer 4.10.0"
    }
  ],
  "STATS": [
    {
      "STATS": 0,
      "ID": "Obelisk0",
      "Elapsed": 11131,
      "Calls": 0,
      "Wait": 0.0,
      "Max": 0.0,
      "Min": 99999999.0,
      "boardId": 0,
      "numChips": 15,
      "numCores": 960,
      "boardTemp": 52.0,
      "chipTemp": 88.0,
      "hotChipTemp": 102.0,
      "powerSupplyTemp": 56.0,
      "fanSpeed0": 4422,
      "fanSpeed1": 4511
    },
    {
      "STATS": 1,
      "ID": "Obelisk1",
      "Elapsed": 11131,
      "Calls": 0,
      "Wait": 0.0,
      "Max": 0.0,
      "Min": 99999999.0,
      "boardId": 1,
      "numChips": 15,
      "numCores": 960,
      "boardTemp": 51.0,
      "chipTemp": 93.0,
      "hotChipTemp": 102.0,
      "powerSupplyTemp": 57.0,
      "fanSpeed0": 4392,
      "fanSpeed1": 4541
    },
    {
      "STATS": 2,
      "ID": "POOL0",
      "Elapsed": 11131,
      "Calls": 0,
      "Wait": 0.0,
      "Max": 0.0,
      "Min": 99999999.0,
      "Pool Calls": 0,
      "Pool Attempts": 0,
      "Pool Wait": 0.0,
      "Pool Max": 0.0,
      "Pool Min": 99999999.0,
      "Pool Av": 0.0,
      "Work Had Roll Time": false,
      "Work Can Roll": false,
      "Work Had Expire": false,
      "Work Roll Time": 0,
      "Work Diff": 1394.18747637,
      "Min Diff": 66.66666667,
      "Max Diff": 4147.10419953,
      "Min Diff Count": 512,
      "Max Diff Count": 770,
      "Times Sent": 1277,
      "Bytes Sent": 255382,
      "Times Recv": 1584,
      "Bytes Recv": 286479,
      "Net Bytes Sent": 255382,
      "Net Bytes Recv": 286479
    }
  ],
  "id": 1
}

[lexx_kz]

Hello, tell me code in the trigger C#, when I need to get a notification that the miner has appeared on the network?

[patrike]

Anyonne notices Afterburner remote server stopped working after 5.7.1 upgrade ?? or just coincidence..

I've not received any other reports on this. Is it the Afterburner Remote Server itself that isn't starting/running correctly?

Yes.. just starts (shows icon) then stops after 2-3 seconds... (icon dissapears)

It sounds ilke the MSI process is crashing on startup. Please make sure .NET Framework 2.0 is installed for this software and you might also get some additional details about the issue in the Windows Event Viewer, Application logs, where any application crashes show up.

[patrike]

Hi Patrike,

any news regarding https://icemining.ca/  addition, PLEASE

M.

It's not yet implemented, but I've had a number of request for this one so it's high on the todo-list.

It should be possible to add manually as a Yiimp based pool:
https://support.awesomeminer.com/support/solutions/articles/35000086026-add-custom-yiimp-compatible-pools

[patrike]

@patrike - Can you add support for Obelisk SC1? This is the API report:

Thanks for sharing. This one will be supported in the next release.

[patrike]

Hello, tell me code in the trigger C#, when I need to get a notification that the miner has appeared on the network?

Is this for a miner already added to Awesome Miner? When the connection is first established to a miner, the trigger "Detect miner API connection established" is fired.

[MoparMiningLLC]

after last update, my GPU's will not mine - they are nvidia gtx 1060's

I am now getting this error - the pools are set up - I have made zero changes to the profit profile - I am not sure what else I need to do. When I first added the GPU's they worked right after I set up the pools - I had to do nothing with the profit profile.

[patrike]

after last update, my GPU's will not mine - they are nvidia gtx 1060's

I am now getting this error - the pools are set up - I have made zero changes to the profit profile - I am not sure what else I need to do. When I first added the GPU's they worked right after I set up the pools - I had to do nothing with the profit profile.

There can be changes of the available predefined pools between versions.

In general, the issue is that for the mining software you have enabled for the profit switcher, there are no pools made available for the profit switcher in the Options dialog, Profit switching section. If you still run into this issue after reviewing the configuration you can find more information in the Awesome Miner log file (toolbar: Tools -> Log File).

You can for example see entries like below, that can give an idea why certain algorithms are being excluded by the profit switcher.
Ignore algorithms not supported by software:
Ignore algorithms not enabled by profile:

[lexx_kz]

when windows starts up, I need a trigger that my rig start working

[patrike]

Awesome Miner version 5.7.3

 ASIC mining
  - Obelisk SC1 and DCR1 ASIC miner support
 GPU mining
  - Mining Pool Hub predefined pool changes Monero, moving to CryptoNightV8
 API
  - Added HTTP API for configuring External Miners (/api/externalminers)
 Mining software
  - XMRig miner 2.8.3 for AMD, nVidia and CPU. Including CryptoNightV8 support.
  - CryptoDredge 0.9.3, including CryptoNightV8

[yrk1957]

Awesome Miner version 5.7.3

 ASIC mining
  - Obelisk SC1 and DCR1 ASIC miner support
 GPU mining
  - Mining Pool Hub predefined pool changes Monero, moving to CryptoNightV8
 API
  - Added HTTP API for configuring External Miners (/api/externalminers)
 Mining software
  - XMRig miner 2.8.3 for AMD, nVidia and CPU. Including CryptoNightV8 support.
  - CryptoDredge 0.9.3, including CryptoNightV8

Thanks! SC1 does indeed work now.

One suggestion I have is to use the "MHS av" for profit reporting instead of "MHS 4s". "MHS 4s" shows an extremely large variation (300GH/s to 1.2 TH/s), every second to second, while "MHS av" stays close to the true hash-rate (550 MH/s).

[ralf007at]

Awesome Miner version 5.7.3

 ASIC mining
  - Obelisk SC1 and DCR1 ASIC miner support
 GPU mining
  - Mining Pool Hub predefined pool changes Monero, moving to CryptoNightV8
 API
  - Added HTTP API for configuring External Miners (/api/externalminers)
 Mining software
  - XMRig miner 2.8.3 for AMD, nVidia and CPU. Including CryptoNightV8 support.
  - CryptoDredge 0.9.3, including CryptoNightV8

Thanks! SC1 does indeed work now.

One suggestion I have is to use the "MHS av" for profit reporting instead of "MHS 4s". "MHS 4s" shows an extremely large variation (300GH/s to 1.2 TH/s), every second to second, while "MHS av" stays close to the true hash-rate (550 MH/s).

for me the SC1 is not working?!
is there a another requirement? or do i have to enable (API) in the miner somehow??

[yrk1957]

Awesome Miner version 5.7.3

 ASIC mining
  - Obelisk SC1 and DCR1 ASIC miner support
 GPU mining
  - Mining Pool Hub predefined pool changes Monero, moving to CryptoNightV8
 API
  - Added HTTP API for configuring External Miners (/api/externalminers)
 Mining software
  - XMRig miner 2.8.3 for AMD, nVidia and CPU. Including CryptoNightV8 support.
  - CryptoDredge 0.9.3, including CryptoNightV8

Thanks! SC1 does indeed work now.

One suggestion I have is to use the "MHS av" for profit reporting instead of "MHS 4s". "MHS 4s" shows an extremely large variation (300GH/s to 1.2 TH/s), every second to second, while "MHS av" stays close to the true hash-rate (550 MH/s).

for me the SC1 is not working?!
is there a another requirement? or do i have to enable (API) in the miner somehow??

SC1 comes with API access limited to localhost (miner) by default. You need to ssh to it and modify the cgminer.conf.

[lexx_kz]

No, thanks for this, but i need find way, how i can receive notification after start OS windows, via trigger awesome miner

[ralf007at]

Awesome Miner version 5.7.3

 ASIC mining
  - Obelisk SC1 and DCR1 ASIC miner support
 GPU mining
  - Mining Pool Hub predefined pool changes Monero, moving to CryptoNightV8
 API
  - Added HTTP API for configuring External Miners (/api/externalminers)
 Mining software
  - XMRig miner 2.8.3 for AMD, nVidia and CPU. Including CryptoNightV8 support.
  - CryptoDredge 0.9.3, including CryptoNightV8

Thanks! SC1 does indeed work now.

One suggestion I have is to use the "MHS av" for profit reporting instead of "MHS 4s". "MHS 4s" shows an extremely large variation (300GH/s to 1.2 TH/s), every second to second, while "MHS av" stays close to the true hash-rate (550 MH/s).

for me the SC1 is not working?!
is there a another requirement? or do i have to enable (API) in the miner somehow??

SC1 comes with API access limited to localhost (miner) by default. You need to ssh to it and modify the cgminer.conf.

yes - i did that through the AM-Button "Configure API access..." i get a green OK - but still not working?!

[MoparMiningLLC]

after last update, my GPU's will not mine - they are nvidia gtx 1060's

I am now getting this error - the pools are set up - I have made zero changes to the profit profile - I am not sure what else I need to do. When I first added the GPU's they worked right after I set up the pools - I had to do nothing with the profit profile.

There can be changes of the available predefined pools between versions.

In general, the issue is that for the mining software you have enabled for the profit switcher, there are no pools made available for the profit switcher in the Options dialog, Profit switching section. If you still run into this issue after reviewing the configuration you can find more information in the Awesome Miner log file (toolbar: Tools -> Log File).

You can for example see entries like below, that can give an idea why certain algorithms are being excluded by the profit switcher.
Ignore algorithms not supported by software:
Ignore algorithms not enabled by profile:

I will try to figure it out but I made zero changes to anything, all I did is upgrade the AM software and none of my gpu's or cpu's will work. When I initially added them, they worked and all I had to do was put my wallet address in the profit switching screen.  I never did anything on the profit profile screen.

[Kung Fu Pete]

We have over 100 miners at our location. I want to create a rule so I get a single notification if 10 or more miners are offline all at the same time. How do I do that?

Thanks

Hi again,

You can create a trigger of the type "C# script" and use the script below to detect if the number of miners offline is 10 or more. You can then add any action you want for this rule, for example a Notification.

Code:

public class TriggerScript
{
	private ContextProvider Context = ScriptManager.Context;
	
	public List<IMinerBase> Check(List<IMinerBase> minerList)
	{
		const int TriggerIfNumberOffline = 10;
		List<IMinerBase> triggerList = new List<IMinerBase>();
		foreach (IMinerBase miner in minerList)
		{
			if (miner.IsRunningState == false)
				triggerList.Add(miner);
		}
		if (triggerList.Count >= TriggerIfNumberOffline)
			return triggerList;
		return null;
	}	
}

I used this script and set a notification as an action. When I do that, I immediately get 72 notifications from the rule. It's always the same miners that trigger the rule. When I check my list of miners, everything says it's online and working fine.

How can I use this so it only sends me a notification if all the miners have been off for 10 minutes or longer?

[Marvell2]

any way to pass an windows environment variable from the client to the pool such as rig name  ?

[crazydane]

Is there a way to change the default version of a particular miner that is being downloaded?

In particular, Z-enemy-1.22 is still defaulting to the CUDA 9.1 version instead of CUDA 10.0.

I'm familiar with the "Upload custom software" tool, but the 1st time I used it, I had to RDP to each miner to add an exception to the virus scanner for ..\AppData\Local\AwesomeMinerService, in addition to the exception I previously added for ..\AppData\Roaming\AwesomeMinerService.  This can be a pain with more than a dozen Managed Miners.

I looked under Manages Software Z-enemy nVidia Miner, and noted the download URL is https://s3.amazonaws.com/awesomeminer-download/z-enemy.1-22-cuda9.1_x64.zip.  So I took a look here:

https://s3.amazonaws.com/awesomeminer-download

But only the cuda9.1 versions of Z-enemy are there, so I figured putting in a custom Download URL reflecting the CUDA 10 version would not have worked.

Anyway, just curious if there's a better way to accomplish this than having to resort to using the Upload customer software tool.

[MoparMiningLLC]

ok so I got my GPU's and CPU's to work - but only if I add NiceHash to the Pools in the Profit Switching page - when I turn off Nicehash none of them will work and with Nicehash their hashrate is super low. If I log into Nicehash directly the hashrate is 5 times higher.