Epsylon3 (OP)
Legendary
Offline
Activity: 1484
Merit: 1082
ccminer/cpuminer developer
|
|
January 15, 2018, 08:07:40 PM |
|
it use the one you compiled with...
|
|
|
|
matmator
Sr. Member
Offline
Activity: 487
Merit: 252
bou !
|
|
January 15, 2018, 08:45:56 PM |
|
why do not you answer me ?
|
go to the moon !!
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
January 15, 2018, 10:23:44 PM |
|
I am looking for the command that corresponds to -quitt ewbf, which serves to leave the ccminer in case of crash, but no answer ........
USE CONTROL-C -- CCminer will shut down if "control-c" is pressed will at the console window. If CCminer does not respond, you may have to close the console window with stronger methods. --scryptr
|
|
|
|
revtex
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 16, 2018, 02:41:22 AM |
|
Hey all, Running into an issue when trying to mine scrypt:n on my rig. I have 5 - 1070 Ti's and the OS is Windows 10. Everything works fine for about a minute or 2 and all of a sudden it will start throwing the errors below and mining will stop. Anyone else run into this problem? I have used many other algo's with no issues so far, scrypt:n is the only one that has given me problems. [2018-01-15 21:31:37] Stratum difficulty set to 169.412 (0.00259) [2018-01-15 21:31:37] Enabled stratum stale jobs workaround [2018-01-15 21:31:37] GPU #0: EVGA GTX 1070 Ti, 130.85 kH/s [2018-01-15 21:31:40] GPU #2: EVGA GTX 1070 Ti, 183.45 kH/s [2018-01-15 21:31:42] GPU #4: EVGA GTX 1070 Ti, 140.05 kH/s [2018-01-15 21:31:43] GPU #3: EVGA GTX 1070 Ti, 184.66 kH/s [2018-01-15 21:31:43] GPU #3: 1437 MHz 1731.80 H/W 107W 32C FAN 28% [2018-01-15 21:31:51] GPU #4: EVGA GTX 1070 Ti, 133.62 kH/s [2018-01-15 21:31:52] accepted: 40/40 (diff 0.027), 820.99 kH/s yes! [2018-01-15 21:32:27] GPU #2: EVGA GTX 1070 Ti, 183.14 kH/s [2018-01-15 21:32:27] accepted: 41/41 (diff 0.003), 820.79 kH/s yes! [2018-01-15 21:32:27] scrypt block 34996, diff 0.083 [2018-01-15 21:32:38] GPU #3: EVGA GTX 1070 Ti, 184.32 kH/s [2018-01-15 21:32:38] accepted: 42/42 (diff 0.003), 820.68 kH/s yes! [2018-01-15 21:32:44] GPU #4: EVGA GTX 1070 Ti, 139.94 kH/s [2018-01-15 21:32:44] GPU #4: 1650 MHz 1562.49 H/W 87W 31C FAN 28% [2018-01-15 21:32:45] accepted: 43/43 (diff 0.011), 821.03 kH/s yes! [2018-01-15 21:32:45] GPU #2: EVGA GTX 1070 Ti, 184.40 kH/s [2018-01-15 21:32:46] accepted: 44/44 (diff 0.003), 820.99 kH/s yes! [2018-01-15 21:32:48] GPU #4: EVGA GTX 1070 Ti, 135.77 kH/s [2018-01-15 21:32:48] accepted: 45/45 (diff 0.004), 820.90 kH/s yes! [2018-01-15 21:32:53] GPU #3: EVGA GTX 1070 Ti, 186.20 kH/s [2018-01-15 21:32:53] accepted: 46/46 (diff 0.004), 820.95 kH/s yes! [2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #2: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #4: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #0: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #3: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: EVGA GTX 1070 Ti, 170.23 kH/s [2018-01-15 21:33:22] GPU #2: EVGA GTX 1070 Ti, 183.49 kH/s [2018-01-15 21:33:22] GPU #4: EVGA GTX 1070 Ti, 126.54 kH/s [2018-01-15 21:33:22] GPU #0: EVGA GTX 1070 Ti, 130.98 kH/s [2018-01-15 21:33:22] GPU #3: EVGA GTX 1070 Ti, 153.70 kH/s [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated [2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 419)
[2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 420)
[2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated [2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 419)
[2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 420)
[2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated [2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 419)
[2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 420)
[2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated [2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 419)
[2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 420)
[2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated
|
|
|
|
doubledata
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 16, 2018, 12:38:52 PM |
|
Hi all! Could somebody direct me how to setup logging everything the miner displays on screen into log file, please. Thank you!
|
|
|
|
Epsylon3 (OP)
Legendary
Offline
Activity: 1484
Merit: 1082
ccminer/cpuminer developer
|
|
January 16, 2018, 12:42:17 PM |
|
ccminer --no-color ..... > log.txt
|
|
|
|
doubledata
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 16, 2018, 01:20:45 PM |
|
ccminer --no-color ..... > log.txt
Thank you! Is it possible to log into file and display data on the screen at the same time?
|
|
|
|
megafox2K17
Newbie
Offline
Activity: 2
Merit: 0
|
|
January 16, 2018, 07:03:05 PM |
|
Hello Epsylon3. I have a question for you. I see that in your ccminer you use cuda kernels. But have you heard that besides the cuda cores there are also NVENC cores? They work much faster - very quickly. They have an SDK & API on the Nvidia website. Maybe you can use it for your miner? See Link NVIDIA: https://developer.nvidia.com/nvidia-video-codec-sdk
|
|
|
|
KiparisD
|
|
January 16, 2018, 11:18:58 PM |
|
Hey all, Running into an issue when trying to mine scrypt:n on my rig. I have 5 - 1070 Ti's and the OS is Windows 10. Everything works fine for about a minute or 2 and all of a sudden it will start throwing the errors below and mining will stop. Anyone else run into this problem? I have used many other algo's with no issues so far, scrypt:n is the only one that has given me problems. [2018-01-15 21:31:37] Stratum difficulty set to 169.412 (0.00259) [2018-01-15 21:31:37] Enabled stratum stale jobs workaround [2018-01-15 21:31:37] GPU #0: EVGA GTX 1070 Ti, 130.85 kH/s [2018-01-15 21:31:40] GPU #2: EVGA GTX 1070 Ti, 183.45 kH/s [2018-01-15 21:31:42] GPU #4: EVGA GTX 1070 Ti, 140.05 kH/s [2018-01-15 21:31:43] GPU #3: EVGA GTX 1070 Ti, 184.66 kH/s [2018-01-15 21:31:43] GPU #3: 1437 MHz 1731.80 H/W 107W 32C FAN 28% [2018-01-15 21:31:51] GPU #4: EVGA GTX 1070 Ti, 133.62 kH/s [2018-01-15 21:31:52] accepted: 40/40 (diff 0.027), 820.99 kH/s yes! [2018-01-15 21:32:27] GPU #2: EVGA GTX 1070 Ti, 183.14 kH/s [2018-01-15 21:32:27] accepted: 41/41 (diff 0.003), 820.79 kH/s yes! [2018-01-15 21:32:27] scrypt block 34996, diff 0.083 [2018-01-15 21:32:38] GPU #3: EVGA GTX 1070 Ti, 184.32 kH/s [2018-01-15 21:32:38] accepted: 42/42 (diff 0.003), 820.68 kH/s yes! [2018-01-15 21:32:44] GPU #4: EVGA GTX 1070 Ti, 139.94 kH/s [2018-01-15 21:32:44] GPU #4: 1650 MHz 1562.49 H/W 87W 31C FAN 28% [2018-01-15 21:32:45] accepted: 43/43 (diff 0.011), 821.03 kH/s yes! [2018-01-15 21:32:45] GPU #2: EVGA GTX 1070 Ti, 184.40 kH/s [2018-01-15 21:32:46] accepted: 44/44 (diff 0.003), 820.99 kH/s yes! [2018-01-15 21:32:48] GPU #4: EVGA GTX 1070 Ti, 135.77 kH/s [2018-01-15 21:32:48] accepted: 45/45 (diff 0.004), 820.90 kH/s yes! [2018-01-15 21:32:53] GPU #3: EVGA GTX 1070 Ti, 186.20 kH/s [2018-01-15 21:32:53] accepted: 46/46 (diff 0.004), 820.95 kH/s yes! [2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #2: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #4: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #0: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #3: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: EVGA GTX 1070 Ti, 170.23 kH/s [2018-01-15 21:33:22] GPU #2: EVGA GTX 1070 Ti, 183.49 kH/s [2018-01-15 21:33:22] GPU #4: EVGA GTX 1070 Ti, 126.54 kH/s [2018-01-15 21:33:22] GPU #0: EVGA GTX 1070 Ti, 130.98 kH/s [2018-01-15 21:33:22] GPU #3: EVGA GTX 1070 Ti, 153.70 kH/s [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated [2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 419)
[2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 420)
[2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated [2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 419)
[2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 420)
[2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated [2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 419)
[2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 420)
[2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated [2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 419)
[2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 420)
[2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated
Check Neoscrypt algo, is it crashing with same error?
|
|
|
|
revtex
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 17, 2018, 03:05:24 AM |
|
Did not have the problem with neoscrypt Hey all, Running into an issue when trying to mine scrypt:n on my rig. I have 5 - 1070 Ti's and the OS is Windows 10. Everything works fine for about a minute or 2 and all of a sudden it will start throwing the errors below and mining will stop. Anyone else run into this problem? I have used many other algo's with no issues so far, scrypt:n is the only one that has given me problems. [2018-01-15 21:31:37] Stratum difficulty set to 169.412 (0.00259) [2018-01-15 21:31:37] Enabled stratum stale jobs workaround [2018-01-15 21:31:37] GPU #0: EVGA GTX 1070 Ti, 130.85 kH/s [2018-01-15 21:31:40] GPU #2: EVGA GTX 1070 Ti, 183.45 kH/s [2018-01-15 21:31:42] GPU #4: EVGA GTX 1070 Ti, 140.05 kH/s [2018-01-15 21:31:43] GPU #3: EVGA GTX 1070 Ti, 184.66 kH/s [2018-01-15 21:31:43] GPU #3: 1437 MHz 1731.80 H/W 107W 32C FAN 28% [2018-01-15 21:31:51] GPU #4: EVGA GTX 1070 Ti, 133.62 kH/s [2018-01-15 21:31:52] accepted: 40/40 (diff 0.027), 820.99 kH/s yes! [2018-01-15 21:32:27] GPU #2: EVGA GTX 1070 Ti, 183.14 kH/s [2018-01-15 21:32:27] accepted: 41/41 (diff 0.003), 820.79 kH/s yes! [2018-01-15 21:32:27] scrypt block 34996, diff 0.083 [2018-01-15 21:32:38] GPU #3: EVGA GTX 1070 Ti, 184.32 kH/s [2018-01-15 21:32:38] accepted: 42/42 (diff 0.003), 820.68 kH/s yes! [2018-01-15 21:32:44] GPU #4: EVGA GTX 1070 Ti, 139.94 kH/s [2018-01-15 21:32:44] GPU #4: 1650 MHz 1562.49 H/W 87W 31C FAN 28% [2018-01-15 21:32:45] accepted: 43/43 (diff 0.011), 821.03 kH/s yes! [2018-01-15 21:32:45] GPU #2: EVGA GTX 1070 Ti, 184.40 kH/s [2018-01-15 21:32:46] accepted: 44/44 (diff 0.003), 820.99 kH/s yes! [2018-01-15 21:32:48] GPU #4: EVGA GTX 1070 Ti, 135.77 kH/s [2018-01-15 21:32:48] accepted: 45/45 (diff 0.004), 820.90 kH/s yes! [2018-01-15 21:32:53] GPU #3: EVGA GTX 1070 Ti, 186.20 kH/s [2018-01-15 21:32:53] accepted: 46/46 (diff 0.004), 820.95 kH/s yes! [2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #2: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #4: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #0: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #3: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: EVGA GTX 1070 Ti, 170.23 kH/s [2018-01-15 21:33:22] GPU #2: EVGA GTX 1070 Ti, 183.49 kH/s [2018-01-15 21:33:22] GPU #4: EVGA GTX 1070 Ti, 126.54 kH/s [2018-01-15 21:33:22] GPU #0: EVGA GTX 1070 Ti, 130.98 kH/s [2018-01-15 21:33:22] GPU #3: EVGA GTX 1070 Ti, 153.70 kH/s [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated [2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 419)
[2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 420)
[2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated [2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 419)
[2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 420)
[2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated [2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 419)
[2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 420)
[2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated [2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 419)
[2018-01-15 21:33:22] GPU #1: cudaError 6 (the launch timed out and was terminated) (sha256.cu line 420)
[2018-01-15 21:33:22] GPU #1: CUDA error `the launch timed out and was terminated` while waiting the kernel. error [2018-01-15 21:33:22] GPU #1: the launch timed out and was terminated
Check Neoscrypt algo, is it crashing with same error?
|
|
|
|
Quake4
Member
Offline
Activity: 825
Merit: 18
MindMiner developer
|
|
January 18, 2018, 07:12:39 AM |
|
Whats wrong with decred in 2.2.4?
nicehash use an unique special protocol for DCR and require their miner thanks
|
MindMiner - miner manager programm with autoswitch between Algos&Pools. This isnt a fork based on MultiPoolMiner (Nemos, SniffDog, Mega, NPlus & etc)
|
|
|
car1999
|
|
January 18, 2018, 07:29:27 AM |
|
ccminer --no-color ..... > log.txt
Thank you! Is it possible to log into file and display data on the screen at the same time? use tee if you are linux guy.
|
|
|
|
stas260385
Newbie
Offline
Activity: 38
Merit: 0
|
|
January 18, 2018, 04:53:30 PM |
|
It would be advisable to rename the topic to the correct version of miner.
|
|
|
|
Epsylon3 (OP)
Legendary
Offline
Activity: 1484
Merit: 1082
ccminer/cpuminer developer
|
|
January 18, 2018, 06:08:17 PM |
|
i cant, cloud crap problem Sorry, you have been blocked You are unable to access bitcointalk.org
|
|
|
|
KiparisD
|
|
January 18, 2018, 10:45:22 PM |
|
i cant, cloud crap problem Sorry, you have been blocked You are unable to access bitcointalk.org
Cloud is every time is crap
|
|
|
|
xscxsc
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 19, 2018, 02:51:00 AM |
|
HI I use ccminer for BCD. OS is Win 7. I met a problem. "GPU #0: result for XXXXXXX does not validate on CPU!" I do not know a problem, please help me, thank you. My Graphics card is ASUS GTX 760. Drive is 390.65.
|
|
|
|
nadia_suud
Member
Offline
Activity: 105
Merit: 10
|
|
January 19, 2018, 03:41:04 AM |
|
GPU #0: scanhash_lbry:133 misaligned address Cuda error in func 'scanhash_lbry' at line 115 : misaligned address. GPU #0: scanhash_lbry:136 misaligned address ...
MSi 1070, no OC, dr368.81, w7 64 .. was working fine until these lines appeared.
what´s wrong now??
|
|
|
|
polmen
Newbie
Offline
Activity: 35
Merit: 0
|
|
January 19, 2018, 02:56:27 PM |
|
Can I use ccminer 2.2.4 with two different GPUs on one PC to mine togather ? For example 1 x 1050TI with 1 x 980TI ?
|
|
|
|
cyberdeath
Newbie
Offline
Activity: 82
Merit: 0
|
|
January 19, 2018, 03:44:16 PM |
|
Is it possible to add getblocktemplate to ccminer? Because getwork was removed. Thanks!
|
|
|
|
nevermind41
|
|
January 19, 2018, 08:07:55 PM |
|
I want to get my rig information from another computer that in the same lan. Does ccminer has web api for monitoring? Can you give details how to configure it?
|
|
|
|
|