KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2435 blocks

[hhumaidan]

Back to back wohooo

[1714836042]

1714836042

[philipma1957]

It has been about 18 hours since I posted this:

and we made 7 blocks  keep on chanting!

"Can you feel it coming in the air hold on"









I am mediating on it  right now Ohmmmmm!!

[citronick]

BLOCK #6 of the day!

Sweeeeeeet Caroline!!

[philipma1957]

My  two s-9 earnings so far.

[kspare]

Holy smokes! Time to sell my 4 S7's and pick up 8 S9's!

[AmbH]

Looks like you are getting 13Th/s on average on each of your S-9s. I thought they were designed to run at 14Th/s?

[kspare]

Where is the best place to sell some S7's?

[wmabern]

Damn! Waking up to 6 blocks!
Very nice.
Time for some coffee!
 

[klamp54]

I try to listen to at least one song before my chicken diner, here is my pick's......

“Green-Eyed Lady” by Sugarloaf , “Little Green” by Joni Mitchell, “Green Hell” by the Misfits, “Green Machine” by Kyuss, “Green Earrings” by Steely Dan, “Green Onions” by Booker T. & the M.G.’s, “The Village Green Preservation Society” by The Kinks, “Green Grass and High Tides” by the Outlaws, “Green River” by Creedence Clearwater Revival
‘The Green Manalishi (With the Two Prong Crown)’ by Fleetwood Mac...........What's it all mean you ask ?

MO'coin in yee wallets, party on wayne

[xxcsu]

What a great Sunday 6 blocks already , BTC price is going up My S9s hashing on kano what else i can wish for today ?
MORE BLOCKS 

Anyone who have S9 up and running noticed the 3rd blade (chain 4 ) is always hashing a little bit slower , and have a higher HW error rate ? or is just me ?

S9 batch 1 / 1

Elapsed         GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU         BestShare
11h20m15s    14,207.28    14,236.85            0                  2,139,706    18.56  198,957.04  615175325

Chain#   ASIC#   Frequency   GH/S(RT)    HW     Temp(PCB)     Temp(Chip)   
1              63             650          4747.25        13          58                    91               
3              63             650          4732.72        14          58                    88
4              63             650          4717.32        44          59                    89

S9 batch 1 / 2

Elapsed         GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU           BestShare
18h47m37s    14,007.62    14,092.26            0                   3,508,591    19.02  198,383.73  103663076

Chain#   ASIC#   Frequency   GH/S(RT)     HW     Temp(PCB)     Temp(Chip)   
1              63             650          4705.24         28          58                    87               
3              63             650          4710.14         28          58                    90
4              63             650          4592.24        366         65                    95

[philipma1957]

What a great Sunday 6 blocks already , BTC price is going up My S9s hashing on kano what else i can wish for today ?
MORE BLOCKS 

Anyone who have S9 up and running noticed the 3rd blade (chain 4 ) is always hashing a little bit slower , and have a higher HW error rate ? or is just me ?

S9 batch 1 / 1

Elapsed         GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU         BestShare
11h20m15s    14,207.28    14,236.85            0                  2,139,706    18.56  198,957.04  615175325

Chain#   ASIC#   Frequency   GH/S(RT)    HW     Temp(PCB)     Temp(Chip)   
1              63             650          4747.25        13          58                    91               
3              63             650          4732.72        14          58                    88
4              63             650          4717.32        44          59                    89

S9 batch 1 / 2

Elapsed         GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU           BestShare
18h47m37s    14,007.62    14,092.26            0                   3,508,591    19.02  198,383.73  103663076

Chain#   ASIC#   Frequency   GH/S(RT)     HW     Temp(PCB)     Temp(Chip)   
1              63             650          4705.24         28          58                    87               
3              63             650          4710.14         28          58                    90
4              63             650          4592.24        366         65                    95

this is due to one blade have a different heat sink then the other 2 blades.  this is done to fit the blades in the case

[firetreeactual]

What a great Sunday 6 blocks already , BTC price is going up My S9s hashing on kano what else i can wish for today ?
MORE BLOCKS 

Anyone who have S9 up and running noticed the 3rd blade (chain 4 ) is always hashing a little bit slower , and have a higher HW error rate ? or is just me ?

S9 batch 1 / 1

Elapsed         GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU         BestShare
11h20m15s    14,207.28    14,236.85            0                  2,139,706    18.56  198,957.04  615175325

Chain#   ASIC#   Frequency   GH/S(RT)    HW     Temp(PCB)     Temp(Chip)   
1              63             650          4747.25        13          58                    91               
3              63             650          4732.72        14          58                    88
4              63             650          4717.32        44          59                    89

S9 batch 1 / 2

Elapsed         GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU           BestShare
18h47m37s    14,007.62    14,092.26            0                   3,508,591    19.02  198,383.73  103663076

Chain#   ASIC#   Frequency   GH/S(RT)     HW     Temp(PCB)     Temp(Chip)   
1              63             650          4705.24         28          58                    87               
3              63             650          4710.14         28          58                    90
4              63             650          4592.24        366         65                    95

Board/chip temps at 65/95 are out of parameter, it would seem, and would cause that. My next "thing" would be to open the case to make sure the heatsinks were clean and the board seated well, etc. Obviously I don't pay a lot of attention to "don't open the case or you invalidate the warranty" warnings...

Overall the S9s seem to be doing well. I saw someone's comment (don't remember who) remarking on hash rates, and that they thought the S9 was supposed to do 14TH. I think that was only Batch 1. They're now spec'd at 12.9. That's still pretty good.

Mine on...

EDIT: Phillip just posted on the heatsink item...makes sense. I wouldn't have known as I haven't seen the inside yet. Thanks, Phil! 

[philipma1957]

Looks like you are getting 13Th/s on average on each of your S-9s. I thought they were designed to run at 14Th/s?

I have them clocked at 587 and 600 at the moment.


My thread on my 2 batch 1's
https://bitcointalk.org/index.php?topic=1512186.0


We are waiting for 2 batch 2's

we will access  the heat when they are put in.

I think in the summer we will do about 587 to 625 clocks.

[AmbH]

I have them clocked at 587 and 600 at the moment.

My thread on my 2 batch 1's
https://bitcointalk.org/index.php?topic=1512186.0

Ok - that is seriously impressive. Mind spinning with ideas...thanks for sharing your setup and so much detailed information on your experience.

[delicin33]

After learning about 5ND and experiencing it in action, I never turned back.

The 5ND method is one of the best systems for steady mining i guess, as far as im not in a way an expert, but i proved for myself that it worked better for my s7's that were working simultaneously at 4 different pools for a week or so.

This 5ND thing is fantastic, i shut down the miners from 1540 to 1710 (UTC+8) to connect & energize new power line (240v 3PH 40A ) to the miners' room, my "N Avg/ miner rewards" only dropped about 5% for today's 6 blocks.

And i notice each time Kano restart the CKDB , we have blocks party

[xxcsu]

What a great Sunday 6 blocks already , BTC price is going up My S9s hashing on kano what else i can wish for today ?
MORE BLOCKS 

Anyone who have S9 up and running noticed the 3rd blade (chain 4 ) is always hashing a little bit slower , and have a higher HW error rate ? or is just me ?

S9 batch 1 / 1

Elapsed         GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU         BestShare
11h20m15s    14,207.28    14,236.85            0                  2,139,706    18.56  198,957.04  615175325

Chain#   ASIC#   Frequency   GH/S(RT)    HW     Temp(PCB)     Temp(Chip)   
1              63             650          4747.25        13          58                    91               
3              63             650          4732.72        14          58                    88
4              63             650          4717.32        44          59                    89

S9 batch 1 / 2

Elapsed         GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU           BestShare
18h47m37s    14,007.62    14,092.26            0                   3,508,591    19.02  198,383.73  103663076

Chain#   ASIC#   Frequency   GH/S(RT)     HW     Temp(PCB)     Temp(Chip)   
1              63             650          4705.24         28          58                    87               
3              63             650          4710.14         28          58                    90
4              63             650          4592.24        366         65                    95

Board/chip temps at 65/95 are out of parameter, it would seem, and would cause that. My next "thing" would be to open the case to make sure the heatsinks were clean and the board seated well, etc. Obviously I don't pay a lot of attention to "don't open the case or you invalidate the warranty" warnings...

Overall the S9s seem to be doing well. I saw someone's comment (don't remember who) remarking on hash rates, and that they thought the S9 was supposed to do 14TH. I think that was only Batch 1. They're now spec'd at 12.9. That's still pretty good.

Mine on...

EDIT: Phillip just posted on the heatsink item...makes sense. I wouldn't have known as I haven't seen the inside yet. Thanks, Phil! 

"Board/chip temps at 65/95 are out of parameter" ,
I dont think you are right on this one maybe im wrong ...  in my past experience is , i got the best hashing power when my miners was running around 60-65C. Always try to keep them in that temp range . i would say 70C is still absolutely safe for the board , core temp for the chips can go around 100C without any problem , lower is better of course

[firetreeactual]

What a great Sunday 6 blocks already , BTC price is going up My S9s hashing on kano what else i can wish for today ?
MORE BLOCKS 

Anyone who have S9 up and running noticed the 3rd blade (chain 4 ) is always hashing a little bit slower , and have a higher HW error rate ? or is just me ?

S9 batch 1 / 1

Elapsed         GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU         BestShare
11h20m15s    14,207.28    14,236.85            0                  2,139,706    18.56  198,957.04  615175325

Chain#   ASIC#   Frequency   GH/S(RT)    HW     Temp(PCB)     Temp(Chip)   
1              63             650          4747.25        13          58                    91               
3              63             650          4732.72        14          58                    88
4              63             650          4717.32        44          59                    89

S9 batch 1 / 2

Elapsed         GH/S(RT)   GH/S(avg)    FoundBlocks   LocalWork    Utility     WU           BestShare
18h47m37s    14,007.62    14,092.26            0                   3,508,591    19.02  198,383.73  103663076

Chain#   ASIC#   Frequency   GH/S(RT)     HW     Temp(PCB)     Temp(Chip)   
1              63             650          4705.24         28          58                    87               
3              63             650          4710.14         28          58                    90
4              63             650          4592.24        366         65                    95

Board/chip temps at 65/95 are out of parameter, it would seem, and would cause that. My next "thing" would be to open the case to make sure the heatsinks were clean and the board seated well, etc. Obviously I don't pay a lot of attention to "don't open the case or you invalidate the warranty" warnings...

Overall the S9s seem to be doing well. I saw someone's comment (don't remember who) remarking on hash rates, and that they thought the S9 was supposed to do 14TH. I think that was only Batch 1. They're now spec'd at 12.9. That's still pretty good.

Mine on...

EDIT: Phillip just posted on the heatsink item...makes sense. I wouldn't have known as I haven't seen the inside yet. Thanks, Phil! 

"Board/chip temps at 65/95 are out of parameter" ,
I dont think you are right on this one maybe im wrong ...  in my past experience is , i got the best hashing power when my miners was running around 60-65C. Always try to keep them in that temp range . i would say 70C is still absolutely safe for the board , core temp for the chips can go around 100C without any problem , lower is better of course

What I meant was that they were not in line with the other components' temps. It's moot now as Philipma's post explained it.

[philipma1957]

It is hot today and we are getting heat creep at the solar array

   75 pcb - 105chip

will clock down to  freq 550

[clgrissom3]

Block by ginex!  Welcome to the Acclaim Board with your first Kano Block!  

That is our 7th of the day!  Rolling!  

Edit:  This block was 26.02737036!  Holy cow! 

[E]

Block by ginex!  Welcome to the Acclaim Board with your first Kano Block! 

That is our 7th of the day!  Rolling! 

Sitting at 0.01CDF for last 5 blocks!