|
Dotcommie
|
|
January 31, 2015, 02:53:35 AM |
|
I will test some more this weekend on 960,970,980 cards. Then I will add some parallization and reach 2 MHASH on the 750ti.
My private x11 miner is now peaking at 13 MHASH on the 980.
sp_, what about spreadx11 miner release 5, when it will be released? Release 4 isn´t working with my 980s and 970 cards (broken hash - does not validate on CPU). Cheers Are you sure it's not working? He said it will give those errors but it's still hashing. My 970s and 750ti's both get that but they have been finding the expected amount of blocks so far.
|
|
|
|
Namsbreh
|
|
January 31, 2015, 11:15:29 AM |
|
Setup version 4 yesterday evening, left it running overnight, it works, found 12 blocks, cards are a mix of 970's & 750ti's.
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
January 31, 2015, 04:19:23 PM |
|
Do you guys get periodical $FFFFFFFF CPU validation errors with v4?
|
Not your keys, not your coins!
|
|
|
antantti
Legendary
Offline
Activity: 1176
Merit: 1015
|
|
January 31, 2015, 04:27:55 PM |
|
Yep, just keep on mining, you will find blocks too.
|
|
|
|
ivcelmik
|
|
January 31, 2015, 05:19:00 PM |
|
Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear? Thx in advance
|
|
|
|
antonio8
Legendary
Offline
Activity: 1386
Merit: 1000
|
|
January 31, 2015, 05:30:43 PM |
|
Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear? Thx in advance 1) Are you using tsiv's or sp_'s (and which version)? 2) What does your bat look like? 3) What cards?4) What OP system and drivers? Those are just a few that might help out.
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks
|
|
|
ivcelmik
|
|
January 31, 2015, 05:39:17 PM |
|
Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear? Thx in advance 1) Are you using tsiv's or sp_'s (and which version)? 2) What does your bat look like? 3) What cards?4) What OP system and drivers? Those are just a few that might help out. 1)Tsiv version 2)spreadminer -o http://127.0.0.1:41677 -u x -p x 3)6x750Ti 4)Win 7x64 347.25 And after 10 minutes gpu load drop to 0 and power c aprox 6% the other 5 work normal and with other alghoritms work all 6 without any problems
|
|
|
|
antonio8
Legendary
Offline
Activity: 1386
Merit: 1000
|
|
January 31, 2015, 06:03:41 PM |
|
Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear? Thx in advance 1) Are you using tsiv's or sp_'s (and which version)? 2) What does your bat look like? 3) What cards?4) What OP system and drivers? Those are just a few that might help out. 1)Tsiv version 2)spreadminer -o http://127.0.0.1:41677 -u x -p x 3)6x750Ti 4)Win 7x64 347.25 And after 10 minutes gpu load drop to 0 and power c aprox 6% the other 5 work normal and with other alghoritms work all 6 without any problems Don't compare to other algos because they all stress the cards differently. I am not a pro at this but sounds like one card is kicking the driver. Or could be a riser issue. Don't know if you have tried to narrow down the problem by running one card at a time (-d 0 then change to -d 1 and so on) to see if they run without getting the big hash. If no issues then run 4 cards at once and then add one card at a time until all 6 are running. I know this is time consuming. I would also run 1 card to see if you get a crazy hash immediately or not. I am betting you will because you are 0 for 37,703 blocks found. Another idea is to have EVGA (or Precision) running and when you see that big hash start kicking in look to see if it shows 5 or 6 cards active. I had to do this before because I had a card disappearing and finally changed the riser and no issue since.
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
January 31, 2015, 06:06:38 PM |
|
Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear? Thx in advance To me it only happens when the OC is too high and the driver crashes.
|
Not your keys, not your coins!
|
|
|
ivcelmik
|
|
January 31, 2015, 06:09:05 PM |
|
Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear? Thx in advance 1) Are you using tsiv's or sp_'s (and which version)? 2) What does your bat look like? 3) What cards?4) What OP system and drivers? Those are just a few that might help out. 1)Tsiv version 2)spreadminer -o http://127.0.0.1:41677 -u x -p x 3)6x750Ti 4)Win 7x64 347.25 And after 10 minutes gpu load drop to 0 and power c aprox 6% the other 5 work normal and with other alghoritms work all 6 without any problems Don't compare to other algos because they all stress the cards differently. I am not a pro at this but sounds like one card is kicking the driver. Or could be a riser issue. Don't know if you have tried to narrow down the problem by running one card at a time (-d 0 then change to -d 1 and so on) to see if they run without getting the big hash. If no issues then run 4 cards at once and then add one card at a time until all 6 are running. I know this is time consuming. I would also run 1 card to see if you get a crazy hash immediately or not. I am betting you will because you are 0 for 37,703 blocks found. Another idea is to have EVGA (or Precision) running and when you see that big hash start kicking in look to see if it shows 5 or 6 cards active. I had to do this before because I had a card disappearing and finally changed the riser and no issue since. Ok thx Anto i think that a riser is the problem.
|
|
|
|
ivcelmik
|
|
January 31, 2015, 06:50:04 PM |
|
Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear? Thx in advance 1) Are you using tsiv's or sp_'s (and which version)? 2) What does your bat look like? 3) What cards?4) What OP system and drivers? Those are just a few that might help out. 1)Tsiv version 2)spreadminer -o http://127.0.0.1:41677 -u x -p x 3)6x750Ti 4)Win 7x64 347.25 And after 10 minutes gpu load drop to 0 and power c aprox 6% the other 5 work normal and with other alghoritms work all 6 without any problems Don't compare to other algos because they all stress the cards differently. I am not a pro at this but sounds like one card is kicking the driver. Or could be a riser issue. Don't know if you have tried to narrow down the problem by running one card at a time (-d 0 then change to -d 1 and so on) to see if they run without getting the big hash. If no issues then run 4 cards at once and then add one card at a time until all 6 are running. I know this is time consuming. I would also run 1 card to see if you get a crazy hash immediately or not. I am betting you will because you are 0 for 37,703 blocks found. Another idea is to have EVGA (or Precision) running and when you see that big hash start kicking in look to see if it shows 5 or 6 cards active. I had to do this before because I had a card disappearing and finally changed the riser and no issue since. Ok thx Anto i think that a riser is the problem. It's working :d
|
|
|
|
Dotcommie
|
|
January 31, 2015, 10:15:33 PM |
|
Guys need help on one of my rigs after few minutes after start minerapp appear this screen https://i.imgur.com/0rIGSuz.png?1 and go on and on like this any ideea how to fix this or why appear? Thx in advance To me it only happens when the OC is too high and the driver crashes. Yup. That or the intensity is too high.
|
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2842
Merit: 1091
--- ChainWorks Industries ---
|
|
February 01, 2015, 02:54:56 AM |
|
hahaha ... hahaha ... HAHAHA ... no! really! ... HAHAHA! ... #crysx
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2912
Merit: 1087
Team Black developer
|
|
February 01, 2015, 10:55:58 AM |
|
KlausT has added bitcoin mining just for fun. If you want to know how fast the newest cards are, build a version from the latest github.
|
|
|
|
|
jpouza
Legendary
Offline
Activity: 2744
Merit: 1118
|
|
February 01, 2015, 11:11:30 AM |
|
I didn't found SHA-256 algo in the help list... subir imagenes gratisHow do I solo mine Bitcoin, could you please help me with the command line? I use the Multibit wallet. tks
|
|
|
|
Bombadil
|
|
February 01, 2015, 11:15:06 AM |
|
I didn't found SHA-256 algo in the help list... How do I solo mine Bitcoin, could you please help me with the command line? I use the Multibit wallet. tks Hah, he should add it to --help Anyways, if I see it right, it's -a bitcoin
|
|
|
|
jpouza
Legendary
Offline
Activity: 2744
Merit: 1118
|
|
February 01, 2015, 11:27:48 AM |
|
I didn't found SHA-256 algo in the help list... How do I solo mine Bitcoin, could you please help me with the command line? I use the Multibit wallet. tks Hah, he should add it to --help Anyways, if I see it right, it's -a bitcoin How do I solo mine Bitcoin? Tried bitcoin.conf in multibit wallet and it didn't work.... Any ideas or tutorial? Cheers
|
|
|
|
|