Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org

[Little Miner]

2 days i don't receive payment. 4xpm on my balance. AR1MADPn2rB9aWG4TDmqqkA1f6YpwQbC7u
just in first day i receive 1xpm. what to do?

I have same problem.
I think we must wait for 7.39 value and later payment will be done.

[1715111344]

1715111344

[MinedTangerine]

hi,
is it normal to get 0.4 CPD-beta10.2.2 on fury(1000/500) now with driver blockchain - windows 10 ?
Also my RX580 give me 0.3 CPD same setting ?
Is It over already to have what was written one month before (9 CPD For Fury )?

it's too low for fury and rx580 cards.
fury (1000/500) 0.56
fury x (1000/500) 0.64
rx580 (1340/2000) 0.47
working fine on 64bit xpmclient.

Can you post settings that gets you 0.47 on RX 580?

I have:

- Core Clock: 1265
- Mem Clock: 2000

- multiplierLimits = ["24", "31", "35"];
- windowSize = "8192";
- sieveSize = "420";
- weaveDepth = "40960";

Oh and I run the blockchain drivers. Do the newest Adrenaline drivers work better?
And I have OneClickPatch from Polaris editor applied. But that only sets the straps on the highest bands.

I only get around 0.40 max. But mostly 0.37-0.39. So what am I missing?

[georat72]

is somebody tried gtx1060 6GB?
how many cpd per card?

Hi , around 0.20 CPD. But at this moment with the recent miner only one card working fine.
Cheers

[tetesh]

http://xpm.x-i-tech.com scam, 2 days no payment. on the balance of 10 coins. The mail is not answered!

[eXtremal]

Hi all, the question was already asked but not answered:

How is the pool http://xpmforall.org/ paying XPM (time, min value...) ?

xpmforall.org: 4 XPM minimal payout, payments every hour, no delay now.
coinsforall.io: configurable payout (minimal 0.1 XPM), manual request supported, payments every 10 minutes.

2 days i don't receive payment. 4xpm on my balance. AR1MADPn2rB9aWG4TDmqqkA1f6YpwQbC7u
just in first day i receive 1xpm. what to do?

I see 5 XPM payed, 0.11 on balance at xpmforall.org.

I have a few mining rigs of 8x 1080ti's per mining rig, and my CPU is very shit (Intel Celeron G3930). This is the optimal mining rig setup for mining other coins. But mining on XPM I seem to get only 0.1-0.15 CPD per card. Does my setup not work for mining this coin since my CPU is too shit? Will the new miner version 10.3 solve this problem? I followed most of the instructions in the config file.

platform = "nvidia"
onCrash = "0"
cpuload = "0"
target = "auto"
sieveSize = "210"
weaveDepth = "65536"
width = "auto"
windowSize = "12284"
multiplierLimits = ["26", "33", "36"]
devices =        ["1", "1", "1", "1", "1", "1", "1", "1"]
sievePerRound = ["5", "5", "5", "5", "5", "5", "5", "5"]

Anything else from the settings above that can be causing problems? ^

Thanks in advance

xpmclient 10.2.2 support 8x1080Ti but on Linux only, native CUDA miner almost ready, wait a little bit plz.

[tetesh]

no enough candidates (6825 available, must be more than 8192
What does this message mean?

[papabiz]

how about 12x 1080ti's windows support?

[korjik]

Why 11ch =/= 10x 10ch?
12ch = 11ch I can understand, but why not reward the blocks finders?

Pool must reward miners according to hash rate only, not according to luck.

Luck? I found several blocks, but was credited less than the half I should have got. I am going to solomine then. It was a good experience there though, just not good for bigger miners.

its good news)) i think abt holidays cause many peopple who write programms spent in warm countries in winter  and spring(but if you live in warm country - no questions)))

[oxygensignatureR]

You must practice to use the pool mining and use the new settings that are there.

[abrgeza]

Can you post settings that gets you 0.47 on RX 580?

I have:

- Core Clock: 1265
- Mem Clock: 2000

- multiplierLimits = ["24", "31", "35"];
- windowSize = "8192";
- sieveSize = "420";
- weaveDepth = "40960";

Oh and I run the blockchain drivers. Do the newest Adrenaline drivers work better?
And I have OneClickPatch from Polaris editor applied. But that only sets the straps on the highest bands.

I only get around 0.40 max. But mostly 0.37-0.39. So what am I missing?

set sievesize=630, other settings are good.
you just need good kernel for that settings.

[cirlama]

thanks eXtremal for your reply about payements

I have 1xGTX 1080 TI + 1xGTX 1070 mining for 21 hours, total around 1 CPD, running fine with defaults nvidia settings, but delivers around 82% of XPM shown in calculator

I also have 1xRX480 + 1 RX580 with defaults amd settings, but both GPUs mine a few minutes and then hang (written in miner windows), even if I underclock them (modified BIOS, blockchain driver, Win10 latest, core i5, cpuload = "2"
somebody has an idea of what to change / test ?
(note: both RX show 0.34 CPD before crashing)

[abrgeza]

is somebody tried gtx1060 6GB?
how many cpd per card?

Hi , around 0.20 CPD. But at this moment with the recent miner only one card working fine.
Cheers

thanks.
it seems that is not worth mining xpm with gtx1060, too expensive card for just 0.20cpd. amd is still better option.

[MinedTangerine]

Can you post settings that gets you 0.47 on RX 580?

I have:

- Core Clock: 1265
- Mem Clock: 2000

- multiplierLimits = ["24", "31", "35"];
- windowSize = "8192";
- sieveSize = "420";
- weaveDepth = "40960";

Oh and I run the blockchain drivers. Do the newest Adrenaline drivers work better?
And I have OneClickPatch from Polaris editor applied. But that only sets the straps on the highest bands.

I only get around 0.40 max. But mostly 0.37-0.39. So what am I missing?

set sievesize=630, other settings are good.
you just need good kernel for that settings.

Thx. Ah I remember you talking about an optimized kernel. Did you change your mind about disclosing how to build it myself?
Anyway thx for the sieveSize tip, so other then that I have optimal setting. Good to know.

[MinedTangerine]

thanks eXtremal for your reply about payements

I have 1xGTX 1080 TI + 1xGTX 1070 mining for 21 hours, total around 1 CPD, running fine with defaults nvidia settings, but delivers around 82% of XPM shown in calculator

I also have 1xRX480 + 1 RX580 with defaults amd settings, but both GPUs mine a few minutes and then hang (written in miner windows), even if I underclock them (modified BIOS, blockchain driver, Win10 latest, core i5, cpuload = "2"
somebody has an idea of what to change / test ?
(note: both RX show 0.34 CPD before crashing)

Basically look my settings I posted for RX 580. It runs rock solid with that. I also undervolt a little as power consumption is quite high on this coin.

[georat72]

is somebody tried gtx1060 6GB?
how many cpd per card?

Hi , around 0.20 CPD. But at this moment with the recent miner only one card working fine.
Cheers

thanks.
it seems that is not worth mining xpm with gtx1060, too expensive card for just 0.20cpd. amd is still better option.

Of course AMD now is better option because of miner. But let see - 0.20 cpd now is 0.00020000 BTC daily.
I don`t know better option for one GTX1060 at this moment.
Am i wrong?

[jebidia]

Hi all,

Having trouble keeping my 6 x 1080ti rig from crashing with 10.2.2 miner...also tried the "stable one" 9.4.1 with even less luck.

10.2.2 works for a bit and then all cards crash.  I've read through the forum and am confident that I've got the setting correct in the config file and I'm leaving all of the frequency/clocks section to all default and the rest appears like pretty basic setup.

Curious what the common causes of crashes are?   I didn't see a driver requirement on the OP so I've left things where they've been for awhile, and stable on all other algos...

I have seen an error about not enough hashes but I guessing that's unrelated.

[ruplikminer]

How many CPD you get on 1070 Ti?

[georat72]

How many CPD you get on 1070 Ti?

0.33

[startblouse8]

Some cards are still crashing and it is still not being able to be perfect.

[ruplikminer]

I think this software requires still a lot of optmization