Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org

[Pinocchio]

Some results (ver 10.3 vs 10.5):

Radeon Vega 56: 0.7 CPD -> close to 0.8 CPD
Radeon Nano: 0.5 CPD -> close to 0.6 CPD
Radeon Rx 480: 0.4-0.42 CPD -> 0.43 CPD

Rx 480 doesn't give me 0.5 CPD, what sieve size and similar settings should I try to get there?

[eXtremal.ik71]

Some results (ver 10.3 vs 10.5):

Radeon Vega 56: 0.7 CPD -> close to 0.8 CPD
Radeon Nano: 0.5 CPD -> close to 0.6 CPD
Radeon Rx 480: 0.4-0.42 CPD -> 0.43 CPD

Rx 480 doesn't give me 0.5 CPD, what sieve size and similar settings should I try to get there?

Nano and Fury(X) also can get +20% performance, good...
For RX480 - not need any changes in config.txt except kernelType="asm", but possible need install more new drivers and remove all *.bin files after. Asm kernel don't like too old (2016 year) Crimson and amdgpu-pro drivers.

[tkachev]

Confirm that Nano and Fury get 20% boost and RX480 goes from 0.4 to 0.47 at 1200 core clock.
470 now get 0.41 at 1190 core. Driver - 19.4.3.
There is a problem that mixed stations with for example 390 and fury. They cannot work in asm mode together.

[tar1s]

There is a problem that mixed stations with for example 390 and fury. They cannot work in asm mode together.

Run two copies of miner, with different settings.

[suona]

Have checked client version 10.5 with "asm" kernel type on RX570, CPD increase is about 15-17% against client version 10.3. Works stable so far. Driver version is 19.1.2.

[singlass]

please show Tahiti some love & bless it with the asm kernel fatha

[a7269118]

please show Tahiti some love & bless it with the asm kernel fatha

The new version of 10.5 asm mode has increased a lot of cpd, the original 8 amd gpu only 2.96cpd, rose to 3.43 in asm mode, but the stability is tested as needed.

But the temperature of ASM mode has risen to 70 degrees ~ very high temperature

25 GPU power increased by 144W

The original version 10.2.2 is 9.3 CPD
Rise to 11.08CPD

[a7269118]

please show Tahiti some love & bless it with the asm kernel fatha

The new version of 10.5 asm mode has increased a lot of cpd, the original 8 amd gpu only 2.96cpd, rose to 3.43 in asm mode, but the stability is tested as needed.

But the temperature of ASM mode has risen to 70 degrees ~ very high temperature

25 GPU power increased by 144W

The original version 10.2.2 is 9.3 CPD
Rise to 11.08CPD

Using version 10.5 for a few days, I found one thing, counting 11 CPD per day, theoretically 87 XPM a day.
https://upload.cc/i1/2019/08/01/wQrWnx.jpg

But I found that 96XPM was dug for a day, equivalent to 12 CPD computing power. I think the developer's so-called Radeon 4xx / 5xx GPU on Linux is up to 30%, and it can also be on WINDOWS, but it can't be displayed on the computing power.

https://upload.cc/i1/2019/08/01/c4uWpk.jpg
https://upload.cc/i1/2019/08/01/Ob3kUx.jpg

[tar1s]

a7269118
Just luck

[cirlama]

Some results (ver 10.3 vs 10.5):

Radeon Vega 56: 0.7 CPD -> close to 0.8 CPD
Radeon Nano: 0.5 CPD -> close to 0.6 CPD
Radeon Rx 480: 0.4-0.42 CPD -> 0.43 CPD

Rx 480 doesn't give me 0.5 CPD, what sieve size and similar settings should I try to get there?

Hi all, what are your settings to get 0.43 CPD on RX480 (or 580...), mine seems a bit lower, it was some time ago but if I remember well, I tried many settings...

[batko]

RX 480 nitro + 1200/2000 - 0.46CPD blockhain driver.

[cirlama]

RX 480 nitro + 1200/2000 - 0.46CPD blockhain driver.

what are your settings, the basic ones below

sieveSize = "480";
weaveDepth = "36864";
width = "auto";
windowSize = "8192";
multiplierLimits = ["25", "31", "34"];

[batko]

default config, only change ASM

[SLasVegas]

Hello. I just started mining on the site xpmforall today.

I downloaded the AMD miner.

I altered the config file to put my desktop wallet address in the file.
I also just named my GPU what I wanted.

It's been over 20 minutes now. Everytime I enter my wallet address in the site,
and hit submit, it's not showing me any statistics for my mining.
I am finding valid shares on the mining window.
It says I'm doing about .34 to .36 chains per day on the mining window.

How long does it take for my stats to start showing up on the site??

Thanks for info.

[cirlama]

I think it's quite fast to get the stats on http://coinsforall.io (http://xpmforall.org/ is there for the calculator only)

[a7269118]

default config, only change ASM

I have several RX580 brands, but I have changed the BIOS to dig ETH, so if I dig XPM, there is a close core frequency, and there are some differences in micro-computing power. I think this is caused by the modification of the label and BIOS. For 0.49 CPD, the lowest is 0.43 CPD, which is under the asm mode.

[Hyp0crit]

Hello. I just started mining on the site xpmforall today.

I downloaded the AMD miner.

I altered the config file to put my desktop wallet address in the file.
I also just named my GPU what I wanted.

It's been over 20 minutes now. Everytime I enter my wallet address in the site,
and hit submit, it's not showing me any statistics for my mining.
I am finding valid shares on the mining window.
It says I'm doing about .34 to .36 chains per day on the mining window.

How long does it take for my stats to start showing up on the site??

Thanks for info.

Check your config file and wallet address at web. Check there is no any extra spaces etc.
It takes less than minute to see stats over website (xpmforall)

[partyman]

default config, only change ASM

how much  power use 480 nitro+

[batko]

125w

[buny]

Apparently eXtremal own ass increases complexity.