[AMBER] X13 POW/POS| 10k AMBER=0,01% SHARES | BUY, HOLD & GET DIVIDENDS in BTC/$

[Mig-23]

More than ten pages our discussions stuck at the wallet

and even the list of shareholder never updated by the dev

[antho281]

More than ten pages our discussions stuck at the wallet

and even the list of shareholder never updated by the dev

It was harder without BlockExplorer
Even more with all the forks who happened

[crzybilly]

More than ten pages our discussions stuck at the wallet

and even the list of shareholder never updated by the dev

It was harder without BlockExplorer
Even more with all the forks who happened

but some of us helped most people get on the right chain

[antho281]

More than ten pages our discussions stuck at the wallet

and even the list of shareholder never updated by the dev

It was harder without BlockExplorer
Even more with all the forks who happened

but some of us helped most people get on the right chain

Exactly
And that's why we got back SSDPOOL and a brand new mining pool!

Now the Dev will be able to update the list !

[canman]

updated wallet to current version, but wallet always out of sync.  can someone plz help  thanks

Have you updated the Conf file?
Add :
addnode=ambercoin01.mooo.com
addnode=ambercoin02.mooo.com
addnode=ambercoin03.mooo.com

Are you on Linux, Mac or Windows?
Try launching with the parameter : --connect=ambercoin01.mooo.com

its giving me an "Error loading blkindex.bat that file is in the appsdata folder already.  plz help thanks


edit:  i have blk001.dat, but not blkindex.bat  where  can i download the file?

[iom]

Working so far.

1. Deleted everything exept wallet.dat (make sure you backed it up and/or knowing your Private Key)
2. Amber.conf:

Code:

upnp=0
listen=0
connect=ambercoin01.mooo.com
connect=ambercoin02.mooo.com
connect=ambercoin03.mooo.com

3. started ambercoin qt-wallet with:

Code:

ambercoin-qt-win-v3.0.0.3\AmberCoin-qt.exe -connect=ambercoin02.mooo.com

It´s running stable and it´s staking through the official nodes:



Code:

getpeerinfo


15:03:03

[
{
"addr" : "ambercoin02.mooo.com",
"services" : "00000001",
"lastsend" : 1448978573,
"lastrecv" : 1448978573,
"conntime" : 1448944016,
"version" : 90001,
"subver" : "/AmberCoin:3.0.0.3/",
"inbound" : false,
"startingheight" : 602508,
"banscore" : 0
},
{
"addr" : "ambercoin01.mooo.com",
"services" : "00000001",
"lastsend" : 1448978573,
"lastrecv" : 1448978573,
"conntime" : 1448944016,
"version" : 90001,
"subver" : "/AmberCoin:3.0.0.3/",
"inbound" : false,
"startingheight" : 602508,
"banscore" : 0
},
{
"addr" : "ambercoin03.mooo.com",
"services" : "00000001",
"lastsend" : 1448978573,
"lastrecv" : 1448978573,
"conntime" : 1448944016,
"version" : 90001,
"subver" : "/AmberCoin:3.0.0.3/",
"inbound" : false,
"startingheight" : 602508,
"banscore" : 0
}
]

That work for me without problem last 2 days. Thank you!

[bathrobehero]

I forked roughly about 6 hours ago only using:

connect=ambercoin01.mooo.com
connect=ambercoin02.mooo.com
connect=ambercoin03.mooo.com

[AmberCoinDev]

I forked roughly about 6 hours ago only using:

connect=ambercoin01.mooo.com
connect=ambercoin02.mooo.com
connect=ambercoin03.mooo.com

This .conf is good to sync on right chain.

Once you synced if you want to turn on staking it is better to use:
addnode=ambercoin01.mooo.com
addnode=ambercoin02.mooo.com
addnode=ambercoin03.mooo.com

We have several test wallets that working without any issues for 2+ days.

[cico76]

Hello, upgraded to new wallet without issues.
Regarding q3 and q4 dividends payments,

any good news ?

Have a nice day.

[exemplaar]

updated wallet to current version, but wallet always out of sync.  can someone plz help  thanks

Have you updated the Conf file?
Add :
addnode=ambercoin01.mooo.com
addnode=ambercoin02.mooo.com
addnode=ambercoin03.mooo.com

Are you on Linux, Mac or Windows?
Try launching with the parameter : --connect=ambercoin01.mooo.com

its giving me an "Error loading blkindex.bat that file is in the appsdata folder already.  plz help thanks


edit:  i have blk001.dat, but not blkindex.bat  where  can i download the file?

blockindex file here is blk0001.dat and it gives you a problem, so only solution would be to:

Delete all except file wallet.dat from \appdata\roaming\ambercoin. Copy also wallet.dat file to safe location.

make this .conf file in ambercoin dir

listen=0
addnode=ambercoin01.mooo.com
addnode=ambercoin02.mooo.com
addnode=ambercoin03.mooo.com

Start the wallet.

Wait till sync and you will be on correct chain. To speedup a process, there is a link to bootstrap file couple of pages back i think.

[antho281]

updated wallet to current version, but wallet always out of sync.  can someone plz help  thanks

Have you updated the Conf file?
Add :
addnode=ambercoin01.mooo.com
addnode=ambercoin02.mooo.com
addnode=ambercoin03.mooo.com

Are you on Linux, Mac or Windows?
Try launching with the parameter : --connect=ambercoin01.mooo.com

its giving me an "Error loading blkindex.bat that file is in the appsdata folder already.  plz help thanks


edit:  i have blk001.dat, but not blkindex.bat  where  can i download the file?

blockindex file here is blk0001.dat and it gives you a problem, so only solution would be to:

Delete all except file wallet.dat from \appdata\roaming\ambercoin. Copy also wallet.dat file to safe location.

make this .conf file in ambercoin dir

listen=0
addnode=ambercoin01.mooo.com
addnode=ambercoin02.mooo.com
addnode=ambercoin03.mooo.com

Start the wallet.

Wait till sync and you will be on correct chain. To speedup a process, there is a link to bootstrap file couple of pages back i think.

+1
I don't think there's any other solution

[Abiky]

updated wallet to current version, but wallet always out of sync.  can someone plz help  thanks

Have you updated the Conf file?
Add :
addnode=ambercoin01.mooo.com
addnode=ambercoin02.mooo.com
addnode=ambercoin03.mooo.com

Are you on Linux, Mac or Windows?
Try launching with the parameter : --connect=ambercoin01.mooo.com

its giving me an "Error loading blkindex.bat that file is in the appsdata folder already.  plz help thanks


edit:  i have blk001.dat, but not blkindex.bat  where  can i download the file?

blockindex file here is blk0001.dat and it gives you a problem, so only solution would be to:

Delete all except file wallet.dat from \appdata\roaming\ambercoin. Copy also wallet.dat file to safe location.

make this .conf file in ambercoin dir

listen=0
addnode=ambercoin01.mooo.com
addnode=ambercoin02.mooo.com
addnode=ambercoin03.mooo.com

Start the wallet.

Wait till sync and you will be on correct chain. To speedup a process, there is a link to bootstrap file couple of pages back i think.

Everything is working just fine in my brand new AMBER wallet. Thanks for this advice. I have created the .conf file with the commands listed above and everything is running smoothly. Wallet is syncing, but it is takes too long. Anyone have blockchain data so I could download it and speed up the syncing process? Thanks 

[crzybilly]

Everything is working just fine in my brand new AMBER wallet. Thanks for this advice. I have created the .conf file with the commands listed above and everything is running smoothly. Wallet is syncing, but it is takes too long. Anyone have blockchain data so I could download it and speed up the syncing process? Thanks 

That means you are still on wrong chain.

This explorer works fine now and shows correct information https://www.blockexperts.com/amber

To help those who are not on a main chain - here is fresh (some hours ago) correct blockchain:

    https://www.dropbox.com/s/94hqeihkupmqjkn/BlockChain2711.rar?dl=0

P.S. Use "repairwallet" command after you synced.

AmberCoin-qt.exe -server -connect=ambercoin01.mooo.com

that's my shortcut to ambercoin. remove -server if you don't plan on solo mining

[exemplaar]

Here is fresh AmberCoin correct blockchain with all support files(up to block 608175)
7-zip archive, tested 100% error free, windows users.
http://www.filedropper.com/ambercoin
Unpack to appdata\roaming, add your wallet.dat file and start wallet.

If you have many transactions you can speed up the process by adding your wallet.dat after sync.
Start without your wallet.dat, wait for sync, close.
Replace newly created wallet.dat with your wallet.dat and start wallet again.

Happy staking.


EDIT:

thanks pokeytex for a warning.

[pokeytex]

Here is fresh AmberCoin correct blockchain with all support files(up to block 608175)
7-zip archive, tested 100% error free, windows users.
http://www.filedropper.com/ambercoin
Unpack to appdata\roaming, add your wallet.dat file and start wallet.

If you have many transactions you can speed up the process by adding your wallet.dat after sync.
Start without your wallet.dat, wait for sync, close.
Replace newly created wallet.dat with your wallet.dat and start wallet again.

Happy staking.

No offense to @exemplaar - but as a rule of thumb you should only download files that the Dev puts on the OP.  You don't want to make a habit of downloading or clicking links.  You may just wake up with an empty wallet.

[fredeq]

I have finally made a successful update.

Reverted back to wallet state of 24th of November (before fork), deleted only peers.dat
Launched wallet 3.0.3 and it synced without problems.
Now sitting on 7 connections and staking.

Maybe it will help someone.

Sounds promising. Could you please post your conf file. I'm not sure if I have the right one.
Thanks.

I am not using any. Just fired 3.0.3 wallet on 24th of November files. (But deleted peers.dat)
It may require a pre-fork copy of ambercoin appdata to work.

Still going nice with 7 connections, no conf file used and just checked to be on the same chain as ssdpool.

[PowerHemp]

i think mine is now since yesterday working too

getblockbynumber 608311

"proofhash" : "000003b7b1adc6ebaf45a8a782552ac166e259dd8658cf3d243e88f936ebba7a"

[antho281]

i think mine is now since yesterday working too

getblockbynumber 608311

"proofhash" : "000003b7b1adc6ebaf45a8a782552ac166e259dd8658cf3d243e88f936ebba7a"

Proofhash : Matches

[Slydrule]

After several days of running my wallet on the right fork, I think I forked.  At the point I forked, I had only one connection - ambercoin03.mooo.com which leads me to believe I may have been banned by ambercoin01 and ambercoin02.  Could this mean ambercoin03 is on the wrong fork?

I had never opened my wallet for staking.  I left it locked but I was solomining.  

Here is my question.  If people are connecting to the mooo.com nodes but are also connected to other nodes including bad ones, could this send the main nodes down a wrong fork?  If so then we must prevent people from using listen=1 and any connections other than connect= (the 3 mooos).

If the mooos forked on their own, that is a bigger problem.

[blockexperts]

I updated our Amber block explorer : https://www.blockexperts.com/amber