With those clocks and 61/9/2 on bittube you should get more than 1500, and on haven even more on ref 56 vega. |
|
|
|
Hello, DOK! Could you turn back bc driver support. The speed of my rx480 is the same compering with adrenalin driver but less power consumption. Now on algo switch my miner freezes(
You can use miner with BC drivers, who said you can't Thanks for reply. But, in this case I don't know why miner sometime freezes on switch algo (moneroocean) Describe it a little bit, or maybe a screenshot, log ? Does the whole rig freeze, or only SRBMiner ? i need more info |
|
|
|
i am looking for suggestions on how to solve the error CL_Build_program_failure. I have received this error since the 1.6 version upgrade and as a result continue to run the 1.5.3 version. I would like to upgrade but have not been able to get around this issue.
appreciate suggestions.
what gpu? some very old gpu? GPU is the AMD R7 model. Still working under the 1.5 version of SRB and with other miners such as stak and xmrig. Try kernel 2, you can see on the first page how to set up gpu_conf and use kernel 2 Is your card Oland, Cape Verde, Bonaire or Pitcairn? |
|
|
|
Hello, DOK! Could you turn back bc driver support. The speed of my rx480 is the same compering with adrenalin driver but less power consumption. Now on algo switch my miner freezes(
You can use miner with BC drivers, who said you can't |
|
|
|
Hello.
Compute mode set- is it possible for more than 9 gpu on one rig?
I have rigs with 12 gpus and the command line set compute mode switches only 9 gpus. I checked in the registry and the other gpu are not switched. Am I doing something wrong and will it be if I'm right in the next version?
Thanks a lot.
Yes, it is a bug, and it is fixed but you will have to wait a little more until i push the new version  |
|
|
|
Google chrome is blocking srbminer.com: "The site ahead contains harmful programs Attackers on www.srbminer.com might attempt to trick you into installing programs that harm your browsing experience (for example, by changing your homepage or showing extra ads on sites that you visit). Learn more " This didn't use to happen. Any reasons why this has suddenly occurred? It did not happen suddenly, since this is a relatively new site and there is an executable to download from it (and guess what, it's a miner = all flagged as virus), google flags the site as possibly harmful. Don't worry, it's not harmful. If you download from the mega link , you won't get this warning. |
|
|
|
 I get this strange error. Here is the log: [2018-09-14 15:43:24] Miner version: 1.6.7
[2018-09-14 15:43:24] Windows version: 10.0 build 17134
[2018-09-14 15:46:12] Video driver version: 24.20.11021.1000
This is really strange as wmic is a windows component, miner uses it to get driver version, and nothing else. I don't know what Office has to do with it, but it looks like that is causing you trouble (as the error says) |
|
|
|
Doktor, two things:
1/ the little script you wrote to create a log on every restart... well, it doesn't create any log at all.
2/ Sep 16th is the date for the next XMR fork (as read on the 8th Altcoin thread). SRBMiner ready?
1. It works, at least on 8 rigs i own (win10, win7) 2. I have info that the fork will be on Oct 18th. 1. Could it have anything to do with permissioning/access rights? There was another guy a few pages back who had the same problem I think (unless the logs are created and stored somewhere else?) 2. Let's dig further. Would be a shame to miss the start. Does it create a log if you just give it a --logfile log.txt? On sept 9 there was a monero dev meeting, thats where the october 18th is from. I also saw a sept 30th somewhere, but nowhere sept 16  We wont miss it, i will release 1.6.8 soon, after that 1.6.9 will contain the new algo |
|
|
|
Doktor, two things:
1/ the little script you wrote to create a log on every restart... well, it doesn't create any log at all.
2/ Sep 16th is the date for the next XMR fork (as read on the 8th Altcoin thread). SRBMiner ready?
1. It works, at least on 8 rigs i own (win10, win7) 2. I have info that the fork will be on Oct 18th. |
|
|
|
my rig have one GPU reduce speed 0 hash/s, i have to use script 'reboot"
How i can find this GPU's position exactly to fix (i used the commant re_order already)
Thanks
There is the BUS value that is unique for every card, that is the same number as in OverdriveNTool for example. |
|
|
|
Hello doktor,
I am just notice that the total mining time will back to zero when the miner auto restart caused by "min_rig_speed" parameter.
Please fix it on the next update.
Of course it will go back to zero, because miner restarted, it's just like if you closed the miner and started it by hand. |
|
|
|
hello, tell me please function autostart is?
What do you mean by autostart? Create a shortcut in you start folder for the start.bat |
|
|
|
My miner is constantly going down: [2018-09-07 09:18:07] pool_have_job: Pool sent a new job (ID: 3554)
[2018-09-07 09:18:12] DFP online load: FAIL
[2018-09-07 09:18:12] devfee: Could not contact http://srbminer.com for a long time!
[2018-09-07 09:18:12] devfee: Please allow miner to connect to http://srbminer.com so it can get DevFee pools data
[2018-09-07 09:18:12] Stopping miner process And then again: [2018-09-07 15:50:12] pool_have_job: Pool sent a new job (ID: 12920)
[2018-09-07 15:50:26] DFP online load: FAIL
[2018-09-07 15:50:26] devfee: Could not contact http://srbminer.com for a long time!
[2018-09-07 15:50:26] devfee: Please allow miner to connect to http://srbminer.com so it can get DevFee pools data
[2018-09-07 15:50:26] Stopping miner process I've added "95.216.148.81 srbminer.com" to hosts file but it haven't changed anything, the problem persists. I have Comodo Firewall installed, but it's configured to permit every connection from SRBminer, Windows Defender is off, I don't know what to do anymore, what do you think about this dok, I can see I'm not the only one with the same problem.  edit: Just noticed I was using 1.6.4, downloaded 1.6.7 and Adrenalin 18.6.1 drivers, will report back with results. It has nothing to do with the miner version. Something IS not allowing connections for minimum a few hours, maximum 1 day. Please check in the log can it connect to the devfee pool at all? |
|
|
|
Dok, on one of my rigs I get this error
Error:
Description = Not found
It still tries to start mining but usually just closes.
Also, I get the warning that I'm not using the recommended drivers even though I'm on 18.6.1. Just to be sure I DDU'ed and reinstalled 18.6.1, same warning.
I would post a log but it just crashed and I'm not on location. My log files aren't formatted correctly for some reason
It is hard to help without any logs.. Also when you press 's' while mining it should show : Driver version: 24.20.11021.1000 That is 18.6.1 driver Also if you open the log in notepad++ it will be formated ok |
|
|
|
[2018-09-06 11:02:21] pool_have_job: Pool sent a new job (ID: ovD8LiK6TD0srJrimOuk8end9x1Z)
[2018-09-06 11:02:45] miner_result: Sending user result to pool
[2018-09-06 11:02:45] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"7e053ea0-55a6-44dd-9ca7-92903de1df6b","job_id":"ovD8LiK6TD0srJrimOuk8end9x1Z","nonce":"1e500000","result":"03f806f3d4b8cdffbfaaaa043857396bfa7d47800b4c3c5a3886c3f3a0150000"}}
[2018-09-06 11:02:46] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-09-06 11:02:46] miner_result: Pool accepted result 0x000015A0
[2018-09-06 11:02:49] miner_result: Sending user result to pool
[2018-09-06 11:02:49] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"7e053ea0-55a6-44dd-9ca7-92903de1df6b","job_id":"ovD8LiK6TD0srJrimOuk8end9x1Z","nonce":"635e0080","result":"1deac70050af98b678a0a711b2e95a8d2c8b3a7345a526b701a0aade2bc90000"}}
[2018-09-06 11:02:49] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-09-06 11:02:49] miner_result: Pool accepted result 0x0000C92B
[2018-09-06 11:02:59] hashrate: GPU0: 1917 H/s [BUS:3]
[2018-09-06 11:02:59] hashrate: Total: 1917 H/s
[2018-09-06 11:03:25] miner_result: Sending user result to pool
[2018-09-06 11:03:25] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"7e053ea0-55a6-44dd-9ca7-92903de1df6b","job_id":"ovD8LiK6TD0srJrimOuk8end9x1Z","nonce":"3ee20000","result":"8df7773bd273432e97163a31e19fa8ded0f8fc252ce481467291f85caa1f0000"}}
[2018-09-06 11:03:26] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-09-06 11:03:26] miner_result: Pool accepted result 0x00001FAA
[2018-09-06 11:03:47] devfee: Could not connect to a devfee pool for a long time!
[2018-09-06 11:03:47] devfee: Tried few pools, but none of them could be connected, so you are probably blocking them.
[2018-09-06 11:03:47] devfee: Don't be a dick.
[2018-09-06 11:03:47] Stopping miner process
See how the log record suddenly stopped mining? Who has a similar situation? Is there a BUG?
Yes it will stop mining if it cant connect to the devfee pool for more than minimum 3 times in a row. Check that something on your side, isnt blocking outgoing connections. Or you are in the same shoes as Juan here. |
|
|
|
If any of you are having problems with sudden software miner stopping and a logfile that ends with something like this: [2018-09-03 17:17:56] devfee: Could not connect to a devfee pool for a long time!
[2018-09-03 17:17:56] devfee: Tried few pools, but none of them could be connected, so you are probably blocking them.
[2018-09-03 17:17:56] devfee: Don't be a dick.
[2018-09-03 17:17:56] Stopping miner process And you have made sure that your firewall is not blocking the program, or some other malware software, then you should try adding to the hosts file of your operating system: 95.216.148.81 srbminer.com Typically your hosts file is located at: C:\Windows\System32\drivers\etc This is the first time in a long time that some of my affected mining rigs have ran past 36 hours without a restart. Thanks for the idea, Dok I think you may be the only one still struggling with this Im glad it helped. BTW, it's all in the logs, if you have DFP online load : SUCCESS, that means it could contact srbminer domain. If you have multiple fails for devfee mining, that can be seen in the logs too.. |
|
|
|
"reboot_script" still not working, even if "min_rig_speed" is set. It just restarts the miner doesn't run the script. Had to change miner on 9 rigs because of this annoying issue  Reboot script is only for the gpu watchdog (which checks if gpu is working normal/crashed) , not for the min hashrate. It never was. I guess it should be I was led by the logic that when the gpu crashes , sometimes a miner restart isn't enough, so the whole rig has to be rebooted. But when only the hashrate falls, a miner restart is enough to get the hashrate back. That's why no reboot_script for this scenario. But next version will use reboot_script on min_hashrate also. |
|
|
|
i have 13gpu rig: 6x hd7850, 2x r9 270, 5x rx550
1.6.7 failed on both r9 270
another 11 gpu working good
version 1.5.9 working good with all 13 gpu
how i can fix this
I think R9 cards are supposed to be kernel 2, not kernel 1. Thats right, you should set it by hand to use kernel 2 in gpu_conf I tried my r7 370 with both version of kernels and can't start it, so this is not problem about kernels, it looks like a some kind of bug in this new versions of miner. Hm, unfortunately i dont have r7 370's to try it. You say you tried kernel 2, can you show me your config.txt ? |
|
|
|
i have 13gpu rig: 6x hd7850, 2x r9 270, 5x rx550
1.6.7 failed on both r9 270
another 11 gpu working good
version 1.5.9 working good with all 13 gpu
how i can fix this
I think R9 cards are supposed to be kernel 2, not kernel 1. Thats right, you should set it by hand to use kernel 2 in gpu_conf |
|
|
|
Hi, please tell me what is wrong here? I'm using the last version 1.6.7 and mining masari, cryptonight fast. On older versions it works great, but on the last 3 ones I can't start, it gives me this error... https://imgur.com/a/XuoP2c7if you just copied over the .exe to an older version without clearing the cache dir, you can get that |
|
|
|
|
Show Posts
