|
1061
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.7.0 - native algo switching
|
on: November 10, 2018, 05:33:13 PM
|
But either way, I'm running the latest version now and still having a spastic secondary GPU. In fact, even on TeamRedMiner I'm seeing something similar. One GPU gets around 1900h/s, but teh secondary is even worse, around 600h/s... I seriously don't know what to do anymore, I'm helpless. Reinstalled Windows, updated drivers, updated BIOS, did everything I could, no hope.
Sell that gpu to a gamer and get yourself one that works  |
|
|
|
|
1065
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.9 - native algo switching
|
on: November 10, 2018, 04:33:14 PM
|
Hello,
I need some help,
I have 4 RX 580 nitro + (8go) , 1 hynix , 3 micron . I was mining with SRB at 850h/s each (V8 Xmr)
I did this to increase my hashrate.
- Custom build with SRB Polaris ( I just pressed PIMP my strap then save BIOS and flash)
- then I DDU my old driver and install new one 18.6.1.
- then used atidmkpacher
- I tried the latest version of the miner with 58 intensity double thread for each RX580.
But now I'm mining at 350h/s each...
{ "cryptonight_type" : "normalv8", "intensity" : 100, "double_threads" : true, "worksize" : 8, "threads" : 2, "fragments" : 16, "bralock" : 50 } 1180/2150 900/950mv 942h per card. Thanks, one card is running at 950h/s with these setting , the 3 others still 850.. All 4 at 1250clock /2250 memory This is a little malformed config, you should set your gpu's in gpu_conf : Open config file for your V8 algo , and make it look like this: {
"cryptonight_type" : "normalv8",
"intensity" : 0,
"double_threads" : true,
"gpu_conf" :
[
{ "id" : 0, "intensity" : 100, "worksize" : 8, "threads" : 2, "fragments" : 16, "bralock" : 50},
{ "id" : 1, "intensity" : 100, "worksize" : 8, "threads" : 2, "fragments" : 16, "bralock" : 50},
{ "id" : 2, "intensity" : 100, "worksize" : 8, "threads" : 2, "fragments" : 16, "bralock" : 50}
]
}i dont know the exact id's and settings of your GPU's this is just an example, you should change it to suit your needs. |
|
|
|
|
1066
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.7.0 - native algo switching
|
on: November 10, 2018, 04:25:16 PM
|
V1.7.0- Speed increase on BitTube/Haven/Heavy/Italo algos up to ~10% (depends of gpu) - Small speed increase on V8 algo for Vegas - Added new algo CN-Dark [CryoNote] - Added new algo CN-Fest [Festival coin] - Added startup monitor which monitors miner startup process - Added new work mode for GPU hashrate watchdog [--gpuwatchdogdisablemode] - Added yet another gpu tuning parameter 'aes' - Fixed a bug related to hash speed monitor and algo switching - Small bug fixes + Performance boost for BitTube/Haven/Heavy/Italo algos up to ~10%, some cards gained 1% some 10%, i don't have exact numbers, you should try it out and see. Vegas gained the most, also i hope that i fixed the Ellesmere 8Gb cards problem, not reaching max hashing speed. If you had 1k+ on some earlier versions, you should be able to reach it now again but you MUST set fragments to 0 if you are setting it by hand, otherwise it probably won't reach max speeds. And no fee increase because of the extra performance, it stays at ~0.85%+ Some small optimisation gained around +10hs on my test Vega56 on V8 algo + Added new algos : Cryptonight Dark and Fest+ Startup monitor, a few of you have problems that sometimes miner wont hang, but it stops on GPU init process. I added a watchdog that should restart miner or run a user defined script if miner won't start working for a period of time. User can define this time period, default is 2 minutes. So if miner can't init gpu's but the process did not freeze, or hang, the watchdog should trigger after 2 minutes and restart the miner. Parameters that can be set in start.bat : --maxstartuptime value (max time to init gpu's and start mining, min 10 sec, max 10 min, def. 2 min) --maxstartuptimescript filename (run this script if maxstartuptime is exceeded) --disablestartupmonitor (disable watchdog for miner startup interval) + If you dont want the gpu hashrate watchdog to restart the whole miner if a gpu hangs, now a new mode is available : disable mode What this does is if it detects that your card can't hash (speed is 0), and its not because your driver crashed (because if that happens nothing can help you  ), then it will disable that gpu, so the other gpu's can continue to work and no miner restart will occur. To use this mode put --gpuwatchdogdisablemode in start.bat+ gpu_conf, new parameter 'aes' . Never enough of extra tuning parameters, right ? This parameter can have the value of 0,1 or 2. Default is 0, and it is probably the best option for newer cards. This parameter just select the method for AES calculation part in the kernel. You can try it out, maybe you gain a few more hashes if you find the right one for your GPU
|
|
|
|
|
1067
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.9 - native algo switching
|
on: November 09, 2018, 11:11:04 PM
|
What is the best way to disable GPU in conf?
i.e -di in Claymore
for example if you want to use gpu 0,2,4,5 : "gpu_conf" :
[
{ "id" : 0, "intensity" : 50, "worksize" : 8, "threads" : 2},
{ "id" : 2, "intensity" : 45, "worksize" : 8, "threads" : 2},
{ "id" : 4, "intensity" : 40, "worksize" : 8, "threads" : 2},
{ "id" : 5, "intensity" : 55, "worksize" : 8, "threads" : 2}
] |
|
|
|
|
1068
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.9 - native algo switching
|
on: November 08, 2018, 07:57:54 AM
|
Both SRBMiner 1.6.8 and 1.6.9 are always stop mining because of devfee connection. I'm mining XMR on nanopool.Problem started few days ago and I didn't change anything or any settings. But my miners are stop after 4-10 hours after start mining. I check the log and the reason is can't connect to srbminer servers because of devfee. I'm not using any firewall /antivirus or i didn't change any settings in windows. Please help me... Log: [2018-11-05 23:18:03] miner_result: Pool accepted result 0x0000477E
[2018-11-05 23:18:10] hashrate: GPU0: 1949 H/s [BUS:3]
[2018-11-05 23:18:10] hashrate: GPU1: 1794 H/s [BUS:6]
[2018-11-05 23:18:10] hashrate: GPU2: 1797 H/s [BUS:10]
[2018-11-05 23:18:10] hashrate: GPU3: 1787 H/s [BUS:13]
[2018-11-05 23:18:10] hashrate: GPU4: 1950 H/s [BUS:16]
[2018-11-05 23:18:10] hashrate: Total: 9277 H/s
[2018-11-05 23:18:13] DFP online load: FAIL
[2018-11-05 23:18:13] devfee: Tried to contact http://srbminer.com a few times, but couldn't! Please check you firewall/antivirus is not blocking connections!
[2018-11-05 23:18:13] GPU devices disabled!
[2018-11-05 23:18:38] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"09099ccb82df052000470b275e855f7fc0bddec6e66d85d332ef5587d123ecae79497ca82d2d8d000000007fdbf809f7f1c393372b235952fa9d5d065ef55f6b85cfe44b5d16379478aa8f11","job_id":"26959","target":"cf8b0000"}}
[2018-11-05 23:18:38] pool_have_job: Pool sent a new job (ID: 26959)
[2018-11-05 23:19:38] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909d9cb82df052000470b275e855f7fc0bddec6e66d85d332ef5587d123ecae79497ca82d2d8d000000002128e76038ebc5877de5d30ef6ce777fee1a164e92609904ae3291b08804a89013","job_id":"26960","target":"cf8b0000"}}
[2018-11-05 23:19:38] pool_have_job: Pool sent a new job (ID: 26960)
[2018-11-05 23:19:52] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909e7cb82df05adb0ec44c0fa30bd4880834613a4d1ced482636a905455a1e9dffda32d5fe0ff00000000695abbfdff3108a5545ebbfccfceb75e8c897b7c7cd5af7054ba84cbbbd3cbc50c","job_id":"26961","target":"cf8b0000"}}
[2018-11-05 23:19:52] pool_have_job: Pool sent a new job (ID: 26961)
[2018-11-05 23:20:10] hashrate: GPU0: 0 H/s [BUS:3]
[2018-11-05 23:20:10] hashrate: GPU1: 0 H/s [BUS:6]
[2018-11-05 23:20:10] hashrate: GPU2: 0 H/s [BUS:10]
[2018-11-05 23:20:10] hashrate: GPU3: 0 H/s [BUS:13]
[2018-11-05 23:20:10] hashrate: GPU4: 0 H/s [BUS:16]
[2018-11-05 23:20:10] hashrate: Total: 0 H/s
[2018-11-05 23:20:52] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909a3cc82df05adb0ec44c0fa30bd4880834613a4d1ced482636a905455a1e9dffda32d5fe0ff0000000079cfa3f7ca31dce5a65e237a3c4799ea723a48d3e7a4bdb4c67343d9e763070d0f","job_id":"26962","target":"cf8b0000"}}
[2018-11-05 23:20:52] pool_have_job: Pool sent a new job (ID: 26962)
[2018-11-05 23:21:52] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909dfcc82df05adb0ec44c0fa30bd4880834613a4d1ced482636a905455a1e9dffda32d5fe0ff00000000462277818a7213d95dd8a7a1613d1589b973545b939dffa2d08f3016b142c00312","job_id":"26963","target":"cf8b0000"}}
[2018-11-05 23:21:52] pool_have_job: Pool sent a new job (ID: 26963)
[2018-11-05 23:22:01] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0909e8cc82df05add27b1f85c9f24682b3e2961a325e35424050d1e0403355f27a174b3c8a3d5f00000000a444d6ef9957489461d33bc2d04591b60714cf193204d96f184c12807b6fe1ff07","job_id":"26964","target":"cf8b0000"}}
[2018-11-05 23:22:01] pool_have_job: Pool sent a new job (ID: 26964)
[2018-11-05 23:22:10] hashrate: GPU0: 0 H/s [BUS:3]
[2018-11-05 23:22:10] hashrate: GPU1: 0 H/s [BUS:6]
[2018-11-05 23:22:10] hashrate: GPU2: 0 H/s [BUS:10]
[2018-11-05 23:22:10] hashrate: GPU3: 0 H/s [BUS:13]
[2018-11-05 23:22:10] hashrate: GPU4: 0 H/s [BUS:16]
[2018-11-05 23:22:10] hashrate: Total: 0 H/s
If it started a few days ago, and you did not have this problem before, it really looks to me that something did change there on your computer/rig. I checked the srbminer.com was not down for a looooooong time, so that wasn't the issue. Anyways, i will loosen on this check a little bit in the next version. |
|
|
|
|
1069
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.9 - native algo switching
|
on: November 07, 2018, 10:11:31 AM
|
SUCCESS: Specified value was saved.
Initializing OpenCL devices, please wait..
ASDASDASDASDASDASDASD
ASDASDASDASDASDASDASD
ASDASDASDASDASDASDASD
ASDASDASDASDASDASDASD
ASDASDASDASDASDASDASD
ASDASDASDASDASDASDASD
ASDASDASDASDASDASDASD
ASDASDASDASDASDASDASD
ASDASDASDASDASDASDASD
ASDASDASDASDASDASDASD
ASDASDASDASDASDASDASD
ASDASDASDASDASDASDASD
GPU0: Radeon RX 580 Series [ellesmere] [4096 MB][I: 59.0][W: 8][T: 2][F: 16][K: 1][BUS: 5]
GPU1: Radeon RX 580 Series [ellesmere] [4096 MB][I: 59.0][W: 8][T: 2][F: 16][K: 1][BUS: 8]
GPU2: Radeon RX 580 Series [ellesmere] [4096 MB][I: 59.0][W: 8][T: 2][F: 16][K: 1][BUS: 12]
GPU3: Radeon RX 580 Series [ellesmere] [4096 MB][I: 59.0][W: 8][T: 2][F: 16][K: 1][BUS: 4]
GPU4: Radeon RX 580 Series [ellesmere] [4096 MB][I: 59.0][W: 8][T: 2][F: 16][K: 1][BUS: 14]
GPU5: Radeon RX 580 Series [ellesmere] [4096 MB][I: 59.0][W: 8][T: 2][F: 16][K: 1][BUS: 9]
GPU6: Radeon RX 580 Series [ellesmere] [4096 MB][I: 59.0][W: 8][T: 2][F: 16][K: 1][BUS: 13]
GPU7: Radeon RX 580 Series [ellesmere] [4096 MB][I: 59.0][W: 8][T: 2][F: 16][K: 1][BUS: 2]
GPU8: Radeon RX 580 Series [ellesmere] [4096 MB][I: 59.0][W: 8][T: 2][F: 16][K: 1][BUS: 3]
GPU9: Radeon RX 580 Series [ellesmere] [4096 MB][I: 59.0][W: 8][T: 2][F: 16][K: 1][BUS: 11]
GPU10: Radeon RX 580 Series [ellesmere] [4096 MB][I: 59.0][W: 8][T: 2][F: 16][K: 1][BUS: 1]
GPU11: Radeon RX 580 Series [ellesmere] [4096 MB][I: 59.0][W: 8][T: 2][F: 16][K: 1][BUS: 10]
what does this means?!
Ahahahaha, i was doing some debug and left this uncommented  Sorry about that, i will remove it in next version. Maybe there are a few more hidden messages, i don't know  Oh you made me laugh so hard |
|
|
|
|
1070
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.9 - native algo switching
|
on: November 07, 2018, 05:21:43 AM
|
Looks like i finally found the 'secret' of hash increase on heavy algos , it can be applied to v8 also.
Just wondering how the hell i did not think of this earlier, it was so obvious lol
if everything goes well i hope i can push the new version in max a week.
Don't know about the speed compared to other miners, we will see. But probably won't reach the JCE advertised 1750hs, but my preliminary tests on Vega56 show an increase of ~ 6-7%
@doktor83 In my opinion, your script can easily surpass 1750 H/s. My rig is the example here, I'm using stock bios (this card is not reference card so I can't flash it to 64) on Gigabyte Vega 56 OC and I can achieve close to 1870 H/s easily: My config files as the followings: {
"cryptonight_type" : "normalv8",
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 50,
"persistent_memory" : false,
"gpu_conf" :
[
{ "id" : 0, "intensity" : 112, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 112, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 112, "worksize" : 16, "threads" : 2},
{ "id" : 3, "intensity" : 112, "worksize" : 16, "threads" : 2},
{ "id" : 4, "intensity" : 112, "worksize" : 16, "threads" : 2},
{ "id" : 5, "intensity" : 112, "worksize" : 16, "threads" : 2},
]
}
In OverdriveNTool, I set my GPU clock to 1474MHz and Memory clock to 960MHz I'm currently using SRBMiner V1.6.8 and Adrenalin V18.6.1 Since you already found the 'secret', perhaps the next version might be able to reach 1900 H/s 1750 is for the heavy algos, not v8 |
|
|
|
|
1071
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.9 - native algo switching
|
on: November 06, 2018, 05:41:43 AM
|
Dok... JCE and Teamredminer are really upping their game with Heavy and CNv8.
Vega 56 1750h/s on heavy
Vega 64 2200h/s on CNv8
Are you planning any performance increases with SRB soon?
Hmm, come on mk111, you expect to Doktor do miracle (once again), and expect it today? Think what U can do to improve miner, lets start with reading Doktor post on this same page: are you going to reduce power usee like team red miner did, it uses 10 to 15 percent power same hash
too unstable for me tho compared to srb
Well that miner gave me homework to do, so i am working on something since then. It will definitely increase the hashrate, but don't know about the power consumption. we will see. Looks like i finally found the 'secret' of hash increase on heavy algos , it can be applied to v8 also. Just wondering how the hell i did not think of this earlier, it was so obvious lol if everything goes well i hope i can push the new version in max a week. Don't know about the speed compared to other miners, we will see. But probably won't reach the JCE advertised 1750hs, but my preliminary tests on Vega56 show an increase of ~ 6-7% |
|
|
|
|
1073
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.9 - native algo switching
|
on: November 03, 2018, 06:08:45 AM
|
Hi Doc,
I maybe found a Bug in latest Miner and Profit switching. In my config, I set in each the 5 min average hashrate for restart, but when Miner switch from a higher HR Algo (fast) to a slower one (maybe haben) it does not reset the values and restart the Miner with the text that average HR is lower than defined.
Can you please check it? After the Algo switch Miner should load the average HR value and reset the average numbers...
Oliver
Going to check it out  |
|
|
|
|
1074
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.9 - native algo switching
|
on: November 02, 2018, 05:37:05 AM
|
i am more interested in your pools file, have you defined a 'cryptonight_type' for the monero ocean pool?
{
"pools" :
[
{
"pool" : "gulf.moneroocean.stream:10064",
"wallet" : "someaddress",
"password" : "MinerSRBAuto:someemail@yahoo.com"
},
{
"pool" : "gulf.moneroocean.stream:10064",
"wallet" : "someaddress",
"password" : "MinerSRBAuto:someemail@yahoo.com"
}
]
}OK, so no 'cryptonight_type' set here for MO. That's good. Maybe you could try dropping the --forcedshutdown, and let the miner release the gpu resources before restarting, let's see is that going to help. |
|
|
|
|
1075
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.9 - native algo switching
|
on: November 02, 2018, 04:40:44 AM
|
I just wanted to report that I've solved my problem with one of my Vegas being quite spastic, like less than half hashrate of its sibling. My Windows key was deactivated for a while now, and I finally contacted the supports and they helped me reactivating my Windows copy. I got an update, and after restarting both cards are running at the same speed:  Edit: Um, it seems I started celebrating too early. My 4th miner report shows it dropped to around 1100h/s again... you need to cool those vegas, set the fan to 3000rpm. That is why the hashrate drops, hbm gets too hot |
|
|
|
|
1077
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.9 - native algo switching
|
on: November 01, 2018, 08:11:23 PM
|
Hey Dok, I have a strange issue where the miner crashes after multiple hours and this is the end of the log: [2018-11-01 19:16:38] algo_switch: Pool requested algo switch to [normalv8]
[2018-11-01 19:16:38] Restarting miner with normalv8 algo
[2018-11-01 19:16:39] Miner version: 1.6.9
[2018-11-01 19:16:39] Windows version: 10.0 build 16299
[2018-11-01 19:16:39] Video driver version: 24.20.11021.1000
[2018-11-01 19:16:40] AMD Platform ID: 1
[2018-11-01 19:16:40] AMD platform FOUND
[2018-11-01 19:16:40] Found 3 AMD devices
[2018-11-01 19:16:40] CPU AES-NI: TRUE
[2018-11-01 19:16:40] GPU0: Radeon RX 580 Series [ellesmere] [8192 MB][I: 58.0][W: 8][T: 2][F: 4][K: 1][BUS: 6]
[2018-11-01 19:16:40] GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][K: 1][BUS: 9]
[2018-11-01 19:16:40] GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 124.0][W: 16][T: 2][F: 4][K: 1][BUS: 3]
[2018-11-01 19:16:40] ADL is enabled
[2018-11-01 19:16:40] Algo switching mode enabled
[2018-11-01 19:16:40] Algo switch minimum time : 60 seconds
[2018-11-01 19:16:40] CryptonightV8 mode enabled
[2018-11-01 19:16:40] Starting init of mining threads
[2018-11-01 19:16:40] Created OCL context
[2018-11-01 19:16:40] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-11-01 19:16:40] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-01 19:16:40] ctx->Program for DeviceID 0 (Thread 0) loaded
[2018-11-01 19:16:40] Created OCL command queue for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Created OCL input buffer for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Created OCL output buffer for DeviceID 0 (Thread 1)
[2018-11-01 19:16:40] Loading normalv8 kernel for DEVICE BUS_ID[6] ...
[2018-11-01 19:16:40] ctx->Program for DeviceID 0 (Thread 1) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 1 (Thread 2)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[9] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 1 (Thread 2) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 1 (Thread 3)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[9] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 1 (Thread 3) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 2 (Thread 4)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[3] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 2 (Thread 4) loaded
[2018-11-01 19:16:41] Created OCL command queue for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Created OCL input buffer for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Created OCL output buffer for DeviceID 2 (Thread 5)
[2018-11-01 19:16:41] Loading normalv8 kernel for DEVICE BUS_ID[3] ...
[2018-11-01 19:16:41] ctx->Program for DeviceID 2 (Thread 5) loaded
need much more info, like config file and pool, is it Monero Ocean? All i see on the log is that miner switched algo to V8 and all gpu's were initialised. |
|
|
|
|
1078
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.9 - native algo switching
|
on: November 01, 2018, 08:09:13 PM
|
For all of us who are having more or less H/s with 1.6.9 than with previous....
I think H/s shown by the program is inaccurate.
Examples:
Pressed H, shown 992 H/s
Pressed S, it says max H/s have been 985
Set worksize to 1
I press H all the time I want, always showing 0 H/s but getting some hashes
S says H/s 200+
So I think the H/s shown by the S command are OK but the ones shown by H or automatically are not.
Max is 'refreshed' every 30 seconds. You probably did not wait 30 seconds to press 'S' after you pressed 'H' and saw 992hs. 'H' shows average hashrate for a very short period, like 8-10 seconds. 'S' shows average for much more, that's why you had there 200hs. |
|
|
|
|
1079
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Masari Pool
|
on: October 31, 2018, 05:02:38 PM
|
I am trying this miner out. Why do I see connections being made to get.masaricoin.com while connected to MoneroOcean?
devfee for fast algo Ok that makes sense then. Is the only pool you are using or should I be expecting to see others show up as well? Probably others too because MO switches algos and devfee is always mined with the actual algo. |
|
|
|
|
Show Posts
